GMCforum: GMCnet » [GMCnet] Engine/Tranny Mounting Bolt Size

Home » Public Forums » GMCnet » [GMCnet] Engine/Tranny Mounting Bolt Size

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Engine/Tranny Mounting Bolt Size [message #224965]

Wed, 09 October 2013 11:13

RicksGMC

Messages: 145
Registered: May 2012

Karma: 0

Senior Member

Does anyone know what the thread size is for the bolts that hold the tranny to the engine (455)?
I'm looking to store my old original engine block on a stand and I'm not sure what bolts to buy.

Thanks!
Rick

Rick&Tammy Drummond
Prior Lake MN
'74 (re)Painted Desert
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Rick Rick&Tammy Drummond Prior Lake MN '74 (re)Painted Desert

Report message to a moderator

Re: [GMCnet] Engine/Tranny Mounting Bolt Size [message #224966 is a reply to message #224965]

Wed, 09 October 2013 11:25

John Heslinga

Messages: 632
Registered: February 2011
Location: Edmonton, Alberta, Canada

Karma: 4

Senior Member

3/8 ". NC. Bolt holes on engine bell housing end

John and Cathie Heslinga 1974 Canyonlands 260 455, Manny tranny and 1 ton, 3:70 LS, Red Seal Journeyman, DTE, BEd. MEd. Edmonton, Alberta

Report message to a moderator

Re: [GMCnet] Engine/Tranny Mounting Bolt Size [message #224992 is a reply to message #224966]

Wed, 09 October 2013 13:35

RicksGMC

Messages: 145
Registered: May 2012

Karma: 0

Senior Member

Excellent, that's what I needed to know.
Thanks John!

Rick

Rick&Tammy Drummond
Prior Lake MN
'74 (re)Painted Desert

On Oct 9, 2013, at 11:25 AM, John Heslinga <rbeeper@hotmail.com> wrote:

>
>
> 3/8 ". NC. Bolt holes on engine bell housing end
> --
> John and Cathie Heslinga
> 1974 Canyonlands 260
> TC4W "Too Cool For Words"
> Retirement Projects Galore
> Edmonton, Alberta
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Rick Rick&Tammy Drummond Prior Lake MN '74 (re)Painted Desert

Report message to a moderator

Previous Topic:	[GMCnet] Watch "Official Anchorman 2 Trailer" on YouTube
Next Topic:	One Ton Front End - Tie Rod End Mismatch

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 20 06:50:44 CDT 2024

Total time taken to generate the page: 0.00650 seconds