Onan carb and choke... [message #224559] |
Fri, 04 October 2013 18:22 |
quadracerx1
Messages: 207 Registered: April 2013 Location: Puyallup, Washington
Karma: 1
|
Senior Member |
|
|
Hi...
I need an Onan carburetor and choke with the linkage... Either in working or rebuildable condition...
OR... Does anyone know of a suitable replacement carb and choke and what they came on?
Thanks,
Steve
75 26' GMC Glenbrook
Puyallup, Washington
|
|
|
Re: Onan carb and choke... [message #224562 is a reply to message #224559] |
Fri, 04 October 2013 18:38 |
tphipps
Messages: 3005 Registered: August 2004 Location: Spanish Fort, AL
Karma: 9
|
Senior Member |
|
|
JmK has rebuild kits, or rebuilt carbs.. Also, Walbro (carb manufacturer) will rebuild the carb, if you wish.
For the choke you are out of luck. There was a solenoid workaround, but the solenoid used is no longer available. But the general idea is still viable.
Tom, MS II
2012 Phoenix Cruiser model 2552
KA4CSG
[Updated on: Fri, 04 October 2013 18:43] Report message to a moderator
|
|
|
Re: Onan carb and choke... [message #225128 is a reply to message #224562] |
Thu, 10 October 2013 20:05 |
Bob de Kruyff
Messages: 4260 Registered: January 2004 Location: Chandler, AZ
Karma: 1
|
Senior Member |
|
|
tphipps wrote on Fri, 04 October 2013 17:38 | JmK has rebuild kits, or rebuilt carbs.. Also, Walbro (carb manufacturer) will rebuild the carb, if you wish.
For the choke you are out of luck. There was a solenoid workaround, but the solenoid used is no longer available. But the general idea is still viable.
Tom, MS II
|
Don't totally give up on the choke. I have a saved search on ebay and have now found 2 new ones. You do need to be patient however.
Bob de Kruyff
78 Eleganza
Chandler, AZ
|
|
|