Distributor [message #224519] |
Fri, 04 October 2013 11:05 |
Wander Inn
Messages: 100 Registered: January 2010 Location: Phoenix Az.
Karma: 0
|
Senior Member |
|
|
Are 403& 455 distributors interchangeable?
Mike
Mike & Chris Hughes
1977 Kingsley
Phoenix, Az.
|
|
|
Re: Distributor [message #224520 is a reply to message #224519] |
Fri, 04 October 2013 11:08 |
C Boyd
Messages: 2629 Registered: April 2006
Karma: 18
|
Senior Member |
|
|
yes
Wander Inn wrote on Fri, 04 October 2013 12:05 | Are 403& 455 distributors interchangeable?
Mike
|
C. Boyd
76 Crestmont
East Tennessee
|
|
|
|
Re: [GMCnet] Distributor [message #224522 is a reply to message #224521] |
Fri, 04 October 2013 11:38 |
k2gkk
Messages: 4452 Registered: November 2009
Karma: -8
|
Senior Member |
|
|
And Dick Patterson told me at Branson that the advance curves also are different for different final drive ratios.
I'm reasonably certain that my final drive is a stock 3.07. I hope to go to a 3.70/3.73 ratio eventually. Dick said that a distributor set for the 3.07 would suffer when coupled with a 3.70 but that one set up for the 3.70 would only suffer slightly if used with a 3.07.
With that info, I bought one there that he already had set up for my hoped for eventual 3.70 drive.
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
~~ ~ D C "Mac" Macdonald ~ ~~
~ ~ Amateur Radio - K2GKK ~ ~
~ ~ USAF and FAA, Retired ~ ~
~ ~ ~ Oklahoma City, OK ~ ~ ~
~~ ~ ~ "The Money Pit" ~ ~ ~~
~ ~ ~ ~ TZE166V101966 ~ ~ ~ ~
~ ~ ~ '76 ex-Palm Beach ~ ~ ~
~~ k2gkk + hotmail dot com ~~
~ www.gmcmhphotos.com/okclb ~
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
______________
*[ ]~~~[][ ][|\
*--OO--[]---O-*
> Date: Fri, 4 Oct 2013 09:17:52 -0700
> From: jamesh1296@gmail.com
> To: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] Distributor
>
> They are both physically the same dimension, so physically they can be
> interchanged, but for optimal performance, the advance curves SHOULD BE
> optimized for each engine. Their torque curves are different. Dick Paterson
> has published MUCH INFORMATION on this.
> Jim Hupy
> Salem, Or
> 78 Gmc Royale 403
> On Oct 4, 2013 9:08 AM, "Charles Boyd" <covered-wagon@comcast.net> wrote:
>
> >
> >
> > yes
> >
> >
> > Wander Inn wrote on Fri, 04 October 2013 12:05
> > > Are 403& 455 distributors interchangeable?
> > >
> > > Mike
> >
> >
> > --
> > C. Boyd
> > 76 Crestmont
> > East Tennessee
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
Re: Distributor [message #224581 is a reply to message #224519] |
Fri, 04 October 2013 20:43 |
Wander Inn
Messages: 100 Registered: January 2010 Location: Phoenix Az.
Karma: 0
|
Senior Member |
|
|
Thanks for the info, need to get my second GMC going.
Mike
Mike & Chris Hughes
1977 Kingsley
Phoenix, Az.
|
|
|
Re: [GMCnet] Distributor [message #224594 is a reply to message #224519] |
Fri, 04 October 2013 22:31 |
|
USAussie
Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Mike,
Yes and no.
The dizzy's will fit either engine, HOWEVER, if you have a points dizzy in your 455 and you install an HEI dizzy the 455 the air
cleaner will not fit without modification.
The dizzy cap is larger on the HEI than the Points dizzy and it will hit the bottom of the air cleaner.
Regards,
Rob M.
-----Original Message-----
From: Mike & Chris Hughes
Are 403& 455 distributors interchangeable?
Mike
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|