[GMCnet] More parts for my EFI, and Cruise control. [message #224370] |
Wed, 02 October 2013 16:44 |
BobDunahugh
Messages: 2465 Registered: October 2010 Location: Cedar Rapids, IA
Karma: 11
|
Senior Member |
|
|
When to the man mall today. Found some full size GM pickups. An 88, a 89, and a 90. All side by side. The 88, and 89 had the 7747's. The 90 was something different. I got the two 7747's, and the cruise motor for $20. Going back tomorrow for the wiring harness's. So from what I understand. There is nothing on the 90 that I should get. Right?
Bob Dunahugh78 RoyaleIowa
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] More parts for my EFI, and Cruise control. [message #224373 is a reply to message #224370] |
Wed, 02 October 2013 16:54 |
Dave Mumert
Messages: 272 Registered: February 2004 Location: Olds, AB, Canada
Karma: 0
|
Senior Member |
|
|
If the '90 has a 1228747 or a 16146299 it is worth getting. The EBL system works with both of them.
Dave
> -----Original Message-----
> From: gmclist-bounces@temp.gmcnet.org [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Bob Dunahugh
> Sent: Wednesday, October 02, 2013 3:45 PM
> To: gmclist@temp.gmcnet.org
> Subject: [GMCnet] More parts for my EFI, and Cruise control.
>
>
>
> When to the man mall today. Found some full size GM pickups. An 88, a 89, and a 90. All side by side. The 88, and 89 had the
7747's.
> The 90 was something different. I got the two 7747's, and the cruise motor for $20. Going back tomorrow for the wiring harness's.
So
> from what I understand. There is nothing on the 90 that I should get. Right?
> Bob Dunahugh78 RoyaleIowa
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|