GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Alcoa Classic PN
[GMCnet] Alcoa Classic PN [message #223175] Thu, 19 September 2013 19:45 Go to next message
dngmissett is currently offline  dngmissett   United States
Messages: 84
Registered: February 2004
Karma: 0
Member
Looking for the PN for the Alcoa Classic Aluminum Budd Wheels . TIA
 
Dick Missett
Wyoming, PA
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Alcoa Classic PN [message #223189 is a reply to message #223175] Thu, 19 September 2013 21:08 Go to previous messageGo to next message
Dennis S is currently offline  Dennis S   United States
Messages: 3046
Registered: November 2005
Karma: 2
Senior Member
dngmissett wrote on Thu, 19 September 2013 19:45

Looking for the PN for the Alcoa Classic Aluminum Budd Wheels . TIA
 
Dick Missett
Wyoming, PA
_______________________________________________




Dick

Alcoa 160231
Alcoa 160232 us the same wheel but polished on the opposite side. You can polish the opposite side to a reasonable level --

Dennis


Dennis S
73 Painted Desert 230
Memphis TN Metro
Re: [GMCnet] Alcoa Classic PN [message #223198 is a reply to message #223189] Thu, 19 September 2013 23:07 Go to previous messageGo to next message
Harry is currently offline  Harry   Canada
Messages: 1888
Registered: October 2007
Location: Victoria, BC CANADA
Karma: 3
Senior Member
CLEVELAND, OH -- Alcoa Wheel Products is voluntarily recalling 16x6-inch dualie aftermarket wheels manufactured between September 1993 through June 1996. These wheels may contain process-induced stresses which could lead to cracks developing over a period of time. This could lead to air loss from the tire as well as the eventual separation of the wheel and tire.



The recall includes aftermarket wheels only. Alcoa wheels sold through original manufacturers such as Ford, General Motors and Chrysler are not affected.



Customers who purchased a recalled wheel should return it to their local dealer for inspection. Before beginning any work on the wheel or vehicle, the dealer must call the Alcoa Campaign Center at (800) 242-9898 option#1 for instructions and an authorization number. The authorization number is necessary to arrange payment for services and, if necessary, return of the wheel.



If the wheel is affected, Alcoa will replace the wheel at no cost to the customer. Authorized payment includes reasonable costs of demounting, tire balancing and remounting the assembly.



Customers and dealers can determine whether their wheels are included by checking the part number and date of manufacture in the wheel roll stamp. Recalled part numbers are:



Model: LTS
Part Numbers: 160251, 160252, 160261, 160262, 160271, 160272



Model: Classic
Part Numbers: 160231, 160232, 160241, 160242, 160281, 160282, 160291, 160292, 160301, 160302
Re: [GMCnet] Alcoa Classic PN [message #223202 is a reply to message #223198] Fri, 20 September 2013 00:24 Go to previous message
jimk is currently offline  jimk   United States
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
Senior Member
Dick,
We have them in stock if you would go to our web sit

--
"
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
Previous Topic: Starved for fuel?
Next Topic: [GMCnet] Shifter cable seized
Goto Forum:
  


Current Time: Sat Sep 28 08:21:51 CDT 2024

Total time taken to generate the page: 0.04141 seconds