GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Aluminum door steps
[GMCnet] Aluminum door steps [message #221286] Thu, 05 September 2013 23:43 Go to next message
The JEWELERS is currently offline  The JEWELERS   United States
Messages: 49
Registered: August 2013
Karma: 0
Member
Hello,

I'm looking for the aluminum steps for both of my doors on the GMC , I see they are available @ about 189. Each , any other suggestions , are they easy to install ?

Thanks,
David

1976 transmode
1977 trans am SE

Sent from my iPad
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Aluminum door steps [message #221288 is a reply to message #221286] Thu, 05 September 2013 23:53 Go to previous messageGo to next message
Ken Burton is currently offline  Ken Burton   United States
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
Senior Member
Yes, it is only 4 bolts. You will need to drill 4 holes.

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
Re: [GMCnet] Aluminum door steps [message #221297 is a reply to message #221286] Fri, 06 September 2013 06:46 Go to previous messageGo to next message
Dennis S is currently offline  Dennis S   United States
Messages: 3046
Registered: November 2005
Karma: 2
Senior Member
The JEWELERS wrote on Thu, 05 September 2013 23:43

Hello,

I'm looking for the aluminum steps for both of my doors on the GMC , I see they are available @ about 189. Each , any other suggestions , are they easy to install ?

Thanks,
David

1976 transmode
1977 trans am SE




David,

You say "both doors" -- if your transmode has more than the standard side entry door, the step install on the second may be an issue, depending upon where it is located.
Do you have pictures?

Dennis


Dennis S
73 Painted Desert 230
Memphis TN Metro
Re: [GMCnet] Aluminum door steps [message #221353 is a reply to message #221286] Fri, 06 September 2013 15:31 Go to previous messageGo to next message
Jim Bounds is currently offline  Jim Bounds   United States
Messages: 842
Registered: January 2004
Karma: 0
Senior Member
It's hard to do better than the Ragusa aluminum entry step.  A perfect part.  4 bolts to install, not rocket science.  You should get them.
 
Jim Bounds
-----------------------


________________________________
From: David Przetycki <great.jewelers@gmail.com>
To: GMC Group <gmclist@temp.gmcnet.org>
Sent: Friday, September 6, 2013 12:43 AM
Subject: [GMCnet] Aluminum door steps


Hello,

I'm looking for the aluminum steps for both of my doors on the GMC , I see they are available @ about 189. Each , any other suggestions , are they easy to install ?

Thanks,
David

1976 transmode
1977 trans am SE

Sent from my iPad
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Aluminum door steps [message #221369 is a reply to message #221353] Fri, 06 September 2013 17:47 Go to previous messageGo to next message
Keith V is currently offline  Keith V   United States
Messages: 2337
Registered: March 2008
Location: Mounds View,MN
Karma: 0
Senior Member
Yeah, he has two entry doors!
the normal one and one where the propane tank would be.

Yes it's a transmode Smile


Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
Re: [GMCnet] Aluminum door steps [message #221396 is a reply to message #221297] Fri, 06 September 2013 21:11 Go to previous messageGo to next message
The JEWELERS is currently offline  The JEWELERS   United States
Messages: 49
Registered: August 2013
Karma: 0
Member
Dennis,

2 doors , one in back , picture

http://www.gmcmhphotos.com/photos/1976-gmc-mobile-city-hall/p50370-image53.html

Vehicle is still at truck mechanic , so can't get a visual , thanks

David

Sent from my iPad

On Sep 6, 2013, at 6:46 AM, Dennis Sexton <dennisfsexton@aol.com> wrote:

>
>
> The JEWELERS wrote on Thu, 05 September 2013 23:43
>> Hello,
>>
>> I'm looking for the aluminum steps for both of my doors on the GMC , I see they are available @ about 189. Each , any other suggestions , are they easy to install ?
>>
>> Thanks,
>> David
>>
>> 1976 transmode
>> 1977 trans am SE
>
>
> David,
>
> You say "both doors" -- if your transmode has more than the standard side entry door, the step install on the second may be an issue, depending upon where it is located.
> Do you have pictures?
>
> Dennis
> --
> Dennis S
> 73 Painted Desert 230
> Germantown, TN
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Aluminum door steps [message #221399 is a reply to message #221396] Fri, 06 September 2013 21:23 Go to previous messageGo to next message
WD0AFQ is currently offline  WD0AFQ   United States
Messages: 7111
Registered: November 2004
Location: Dexter, Mo.
Karma: 207
Senior Member
Now, ain't that something. Nice looking rig.
Dan


3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer

[Updated on: Fri, 06 September 2013 21:23]

Report message to a moderator

Re: [GMCnet] Aluminum door steps [message #221405 is a reply to message #221396] Fri, 06 September 2013 21:58 Go to previous message
Dennis S is currently offline  Dennis S   United States
Messages: 3046
Registered: November 2005
Karma: 2
Senior Member
David,

I am not positive where you would want the step in relation to the body frame -- but it looks like the rear door step might be as simple as the regular door.
Here is a shot of the frame in that area -- just not sure where the angle comes off and how that would affect the step location.

http://www.gmcmhphotos.com/photos/three-3-inch-exhaust/p39780-april-30-2007-103.html

Dennis



The JEWELERS wrote on Fri, 06 September 2013 21:11

Dennis,

2 doors , one in back , picture

http://www.gmcmhphotos.com/photos/1976-gmc-mobile-city-hall/p50370-image53.html

Vehicle is still at truck mechanic , so can't get a visual , thanks

David

Sent from my iPad

On Sep 6, 2013, at 6:46 AM, Dennis Sexton <dennisfsexton@aol.com> wrote:

>
>
> The JEWELERS wrote on Thu, 05 September 2013 23:43
>> Hello,
>>
>> I'm looking for the aluminum steps for both of my doors on the GMC , I see they are available @ about 189. Each , any other suggestions , are they easy to install ?
>>
>> Thanks,
>> David
>>
>> 1976 transmode
>> 1977 trans am SE
>
>
> David,
>
> You say "both doors" -- if your transmode has more than the standard side entry door, the step install on the second may be an issue, depending upon where it is located.
> Do you have pictures?
>
> Dennis
> --
> Dennis S
> 73 Painted Desert 230
> Germantown, TN
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist





Dennis S
73 Painted Desert 230
Memphis TN Metro
Previous Topic: [GMCnet] Need the white vinyl trim around large window
Next Topic: Onan 6kw
Goto Forum:
  


Current Time: Sat Nov 16 12:46:23 CST 2024

Total time taken to generate the page: 0.00928 seconds