GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Furnace Access
[GMCnet] Furnace Access [message #220817] Sun, 01 September 2013 22:24 Go to next message
Jeff Marten is currently offline  Jeff Marten   United States
Messages: 199
Registered: August 2013
Karma: 1
Senior Member
Well, I checked the furnace operation tonight since we may be using the coach next weekend. Nada. No activity or noises when the thermostat is turned up. There is a Suburban furnace installed, couldn't see a model number. Gas inlet valve is open.
What is the best way to test/troubleshoot?

Jeff Marten
Colorado Springs, Co
1978 Royale

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



1985 Gulf Stream 34' Sun Stream 1964 Falcon 'Vert 1980 Bradley GTE 1999 Chevy Tahoe 2005 Saab 93 Aero 1987 Suzuki Intruder 1400 1978 Glastron/Carlson CV23
Re: [GMCnet] Furnace Access [message #220865 is a reply to message #220817] Mon, 02 September 2013 10:18 Go to previous messageGo to next message
A Hamilto is currently offline  A Hamilto   United States
Messages: 4508
Registered: April 2011
Karma: 39
Senior Member
Jeff Marten wrote on Sun, 01 September 2013 22:24

Well, I checked the furnace operation tonight since we may be using the coach next weekend. Nada. No activity or noises when the thermostat is turned up. There is a Suburban furnace installed, couldn't see a model number. Gas inlet valve is open.
What is the best way to test/troubleshoot?

Jeff Marten
Colorado Springs, Co
1978 Royale
Did you ignite the pilot light?
Re: [GMCnet] Furnace Access [message #220884 is a reply to message #220865] Mon, 02 September 2013 13:31 Go to previous messageGo to next message
Jeff Marten is currently offline  Jeff Marten   United States
Messages: 199
Registered: August 2013
Karma: 1
Senior Member
It's good to have uber-anal POs; found the furnace model and serial numbers on a page in the log book I received with the coach (along with model and serial numbers for just about everything else). It's a Suburban NT-30M. The manual I located online says it has to be removed in order to be serviced. I need to verify it is getting power. Manual says the blower should come on, then assuming the sail switch closes, the burner should ignite; says it is electronic ignition, pilot-less.

>
> Did you ignite the pilot light?
> --
> '73 23' Sequoia For Camping
> '73 23' CanyonLands For Sale
> UA (Upper Alabama)
> "Time is money. If you use YOUR time, you get to keep YOUR money."
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



1985 Gulf Stream 34' Sun Stream 1964 Falcon 'Vert 1980 Bradley GTE 1999 Chevy Tahoe 2005 Saab 93 Aero 1987 Suzuki Intruder 1400 1978 Glastron/Carlson CV23
Re: [GMCnet] Furnace Access [message #220926 is a reply to message #220884] Mon, 02 September 2013 19:14 Go to previous messageGo to next message
A Hamilto is currently offline  A Hamilto   United States
Messages: 4508
Registered: April 2011
Karma: 39
Senior Member
Jeff Marten wrote on Mon, 02 September 2013 13:31

It's good to have uber-anal POs; found the furnace model and serial numbers on a page in the log book I received with the coach (along with model and serial numbers for just about everything else). It's a Suburban NT-30M. The manual I located online says it has to be removed in order to be serviced. I need to verify it is getting power. Manual says the blower should come on, then assuming the sail switch closes, the burner should ignite; says it is electronic ignition, pilot-less.
Another thing that changed during production I guess. My Operating Manual says you have to light it manually.

LIGHTING FURNACE
NOTE: Be sure manual control valve at LP gas tank is fully open.
1 . Set thermostat, located in rear of Motor Home living area to "OFF" position.
2 . Open furnace manual valve fully, located under sink near the sink trap. Do not attempt to operate furnace with valve partly opened as proper operation depends on valve being fully open.
NOTE: If relighting furnace, close furnace manual valve for 5 minutes, then open manual valve and proceed to next step.
3. Remove lighter cap. Depress reset button and hold in. Pump igniter until pilot lights .
4. Continue to hold in reset button for 30 seconds after pilot is lighted.
5. Install lighter cap.
6. Set thermostat to desired temperature.
NOTE: Furnace pilot may be lit by match if desired, through lighter cap opening.
Re: [GMCnet] Furnace Access [message #220928 is a reply to message #220926] Mon, 02 September 2013 19:26 Go to previous messageGo to next message
tphipps is currently offline  tphipps   United States
Messages: 3005
Registered: August 2004
Location: Spanish Fort, AL
Karma: 9
Senior Member
Turn on the stove top and verify gas flow. Sometimes gas lines are full of air because you turned the feed into the lie of at he tank. May take a bit before gas actually gets to burner. Mine initially took about 30 seconds, as I recall. Is there a reset button? Mine needed to be reset before it would fire up.
Tom, MS II


2012 Phoenix Cruiser model 2552 KA4CSG
Re: [GMCnet] Furnace Access [message #220930 is a reply to message #220817] Mon, 02 September 2013 19:52 Go to previous messageGo to next message
hnielsen2 is currently offline  hnielsen2   United States
Messages: 1434
Registered: February 2004
Location: Alpine CA
Karma: 0
Senior Member
Ours takes a little longer to purge as we only have the heater.
Even when we turn off the valves at the tank and the heater?
We have a electric cook top and convection microwave oven.
Howard
Alpine Ca
74 Canyon lands

All is well with my Lord
Never Give Up


On Sep 2, 2013, at 17:26, Thomas Phipps <tph1pp5@yahoo.com> wrote:

>
>
> Turn on the stove top and verify gas flow. Sometimes gas lines are full of air because you turned the feed into the lie of at he tank. May take a bit before gas actually gets to burner. Mine initially took about 30 seconds, as I recall. Is there a reset button? Mine needed to be reset before it would fire up.
> Tom, MS II
> --
> 1975 GMC Avion, under forever re-construction
> Vicksburg, MS. 3.7 miles from I-20
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



All is well with my Lord
Re: [GMCnet] Furnace Access [message #220941 is a reply to message #220926] Mon, 02 September 2013 20:26 Go to previous messageGo to next message
Jeff Marten is currently offline  Jeff Marten   United States
Messages: 199
Registered: August 2013
Karma: 1
Senior Member
Where would it be lit? There is no exterior access door. The unit is under the sink and has a removable cover, which just accesses the blower chamber containing the heat exchanger. There is only an inspection window, and what appears to be wires going to the ignitor on the exchanger.
Here's the manual I found for the NT30-M:
http://www.bdub.net/manuals/SuburbanDynaTrail.pdf

The blower should run first, closing the sail switch, then firing the burner. I get nothing. It does have 13+v going into it.
I don't know what should be coming from the thermostat wire to check it: +, ground, etc?


> To: gmclist@temp.gmcnet.org
> From: markbb1@netzero.com
> Date: Mon, 2 Sep 2013 19:14:12 -0500
> Subject: Re: [GMCnet] Furnace Access
>
>
>
> Jeff Marten wrote on Mon, 02 September 2013 13:31
> > It's good to have uber-anal POs; found the furnace model and serial numbers on a page in the log book I received with the coach (along with model and serial numbers for just about everything else). It's a Suburban NT-30M. The manual I located online says it has to be removed in order to be serviced. I need to verify it is getting power. Manual says the blower should come on, then assuming the sail switch closes, the burner should ignite; says it is electronic ignition, pilot-less.
> Another thing that changed during production I guess. My Operating Manual says you have to light it manually.
>
> LIGHTING FURNACE
> NOTE: Be sure manual control valve at LP gas tank is fully open.
> 1 . Set thermostat, located in rear of Motor Home living area to "OFF" position.
> 2 . Open furnace manual valve fully, located under sink near the sink trap. Do not attempt to operate furnace with valve partly opened as proper operation depends on valve being fully open.
> NOTE: If relighting furnace, close furnace manual valve for 5 minutes, then open manual valve and proceed to next step.
> 3. Remove lighter cap. Depress reset button and hold in. Pump igniter until pilot lights .
> 4. Continue to hold in reset button for 30 seconds after pilot is lighted.
> 5. Install lighter cap.
> 6. Set thermostat to desired temperature.
> NOTE: Furnace pilot may be lit by match if desired, through lighter cap opening.
> --
> '73 23' Sequoia For Camping
> '73 23' CanyonLands For Sale
> UA (Upper Alabama)
> "Time is money. If you use YOUR time, you get to keep YOUR money."
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



1985 Gulf Stream 34' Sun Stream 1964 Falcon 'Vert 1980 Bradley GTE 1999 Chevy Tahoe 2005 Saab 93 Aero 1987 Suzuki Intruder 1400 1978 Glastron/Carlson CV23
Re: [GMCnet] Furnace Access [message #220942 is a reply to message #220928] Mon, 02 September 2013 20:28 Go to previous messageGo to next message
Jeff Marten is currently offline  Jeff Marten   United States
Messages: 199
Registered: August 2013
Karma: 1
Senior Member
I have no stove ..... but will soon. The fridge works fine on gas. The furnace should start the blower first, but does nothing.

> To: gmclist@temp.gmcnet.org
> From: tph1pp5@yahoo.com
> Date: Mon, 2 Sep 2013 19:26:09 -0500
> Subject: Re: [GMCnet] Furnace Access
>
>
>
> Turn on the stove top and verify gas flow. Sometimes gas lines are full of air because you turned the feed into the lie of at he tank. May take a bit before gas actually gets to burner. Mine initially took about 30 seconds, as I recall. Is there a reset button? Mine needed to be reset before it would fire up.
> Tom, MS II
> --
> 1975 GMC Avion, under forever re-construction
> Vicksburg, MS. 3.7 miles from I-20
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



1985 Gulf Stream 34' Sun Stream 1964 Falcon 'Vert 1980 Bradley GTE 1999 Chevy Tahoe 2005 Saab 93 Aero 1987 Suzuki Intruder 1400 1978 Glastron/Carlson CV23
Re: [GMCnet] Furnace Access [message #220949 is a reply to message #220941] Mon, 02 September 2013 20:56 Go to previous messageGo to next message
A Hamilto is currently offline  A Hamilto   United States
Messages: 4508
Registered: April 2011
Karma: 39
Senior Member
Jeff Marten wrote on Mon, 02 September 2013 20:26

Where would it be lit? There is no exterior access door. The unit is under the sink and has a removable cover, which just accesses the blower chamber containing the heat exchanger. There is only an inspection window, and what appears to be wires going to the ignitor on the exchanger. ...
Yours is a newer model. I just cut and pasted the gobbledygook from my manual for those that have furnaces with a manually ignited pilot light.
Re: [GMCnet] Furnace Access [message #220982 is a reply to message #220949] Tue, 03 September 2013 05:20 Go to previous messageGo to next message
Bruce Hart is currently offline  Bruce Hart   United States
Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
Senior Member
Jeff,
I have a newer Suburban furnace. Can you access the side of the furnace
next to the couch. I have an off/on switch on that side of the unit.


On Mon, Sep 2, 2013 at 7:56 PM, A. <markbb1@netzero.com> wrote:

>
>
> Jeff Marten wrote on Mon, 02 September 2013 20:26
> > Where would it be lit? There is no exterior access door. The unit is
> under the sink and has a removable cover, which just accesses the blower
> chamber containing the heat exchanger. There is only an inspection window,
> and what appears to be wires going to the ignitor on the exchanger. ...
> Yours is a newer model. I just cut and pasted the gobbledygook from my
> manual for those that have furnaces with a manually ignited pilot light.
> --
> '73 23' Sequoia For Camping
> '73 23' CanyonLands For Sale
> UA (Upper Alabama)
> "Time is money. If you use YOUR time, you get to keep YOUR money."
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
51st State? Northern Colorado!
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Bruce Hart 1976 Palm Beach 1977 28' Kingsley La Grange, Wyoming
Re: [GMCnet] Furnace Access [message #220983 is a reply to message #220982] Tue, 03 September 2013 05:27 Go to previous messageGo to next message
Jeff Marten is currently offline  Jeff Marten   United States
Messages: 199
Registered: August 2013
Karma: 1
Senior Member
Is it near the wiring harness connector? I'll have to feel around, see if there is a switch.

> Date: Tue, 3 Sep 2013 04:20:47 -0600
> From: hartsgmc@gmail.com
> To: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] Furnace Access
>
> Jeff,
> I have a newer Suburban furnace. Can you access the side of the furnace
> next to the couch. I have an off/on switch on that side of the unit.
>
>
> On Mon, Sep 2, 2013 at 7:56 PM, A. <markbb1@netzero.com> wrote:
>
> >
> >
> > Jeff Marten wrote on Mon, 02 September 2013 20:26
> > > Where would it be lit? There is no exterior access door. The unit is
> > under the sink and has a removable cover, which just accesses the blower
> > chamber containing the heat exchanger. There is only an inspection window,
> > and what appears to be wires going to the ignitor on the exchanger. ...
> > Yours is a newer model. I just cut and pasted the gobbledygook from my
> > manual for those that have furnaces with a manually ignited pilot light.
> > --
> > '73 23' Sequoia For Camping
> > '73 23' CanyonLands For Sale
> > UA (Upper Alabama)
> > "Time is money. If you use YOUR time, you get to keep YOUR money."
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
>
>
>
> --
> Bruce Hart
> 1976 Palm Beach
> Milliken, Co
> GMC=Got More Class
> 51st State? Northern Colorado!
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



1985 Gulf Stream 34' Sun Stream 1964 Falcon 'Vert 1980 Bradley GTE 1999 Chevy Tahoe 2005 Saab 93 Aero 1987 Suzuki Intruder 1400 1978 Glastron/Carlson CV23
Re: [GMCnet] Furnace Access [message #220984 is a reply to message #220983] Tue, 03 September 2013 05:35 Go to previous message
Bruce Hart is currently offline  Bruce Hart   United States
Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
Senior Member
It is a small rocker switch. The size of your small finger from the tip to
the first joint.


On Tue, Sep 3, 2013 at 4:27 AM, Jeff Marten <jtmarten@msn.com> wrote:

> Is it near the wiring harness connector? I'll have to feel around, see if
> there is a switch.
>
> > Date: Tue, 3 Sep 2013 04:20:47 -0600
> > From: hartsgmc@gmail.com
> > To: gmclist@temp.gmcnet.org
> > Subject: Re: [GMCnet] Furnace Access
> >
> > Jeff,
> > I have a newer Suburban furnace. Can you access the side of the furnace
> > next to the couch. I have an off/on switch on that side of the unit.
> >
> >
> > On Mon, Sep 2, 2013 at 7:56 PM, A. <markbb1@netzero.com> wrote:
> >
> > >
> > >
> > > Jeff Marten wrote on Mon, 02 September 2013 20:26
> > > > Where would it be lit? There is no exterior access door. The unit
> is
> > > under the sink and has a removable cover, which just accesses the
> blower
> > > chamber containing the heat exchanger. There is only an inspection
> window,
> > > and what appears to be wires going to the ignitor on the exchanger. ...
> > > Yours is a newer model. I just cut and pasted the gobbledygook from my
> > > manual for those that have furnaces with a manually ignited pilot
> light.
> > > --
> > > '73 23' Sequoia For Camping
> > > '73 23' CanyonLands For Sale
> > > UA (Upper Alabama)
> > > "Time is money. If you use YOUR time, you get to keep YOUR money."
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > >
> >
> >
> >
> > --
> > Bruce Hart
> > 1976 Palm Beach
> > Milliken, Co
> > GMC=Got More Class
> > 51st State? Northern Colorado!
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
51st State? Northern Colorado!
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Bruce Hart 1976 Palm Beach 1977 28' Kingsley La Grange, Wyoming
Previous Topic: [GMCnet] ON THE WAY TO COOS BAY --JERRY'S DEMO COACH -
Next Topic: [GMCnet] Adjusting front ride height
Goto Forum:
  


Current Time: Sat Nov 16 20:43:43 CST 2024

Total time taken to generate the page: 0.01158 seconds