Large bore rear wheel brake cylinder [message #219174] |
Mon, 19 August 2013 20:46 |
zhagrieb
Messages: 676 Registered: August 2009 Location: Portland Oregon
Karma: 0
|
Senior Member |
|
|
I understand rear braking can be enhanced by replacing the stock brake cylinder on the mid axel with one that has a larger bore. Can anyone help me with a part number for that cylinder?
Glenn
Glenn Giere, Portland OR, K7GAG
'73 "Moby the Motorhome" 26'
[Updated on: Mon, 19 August 2013 20:47] Report message to a moderator
|
|
|
Re: [GMCnet] Large bore rear wheel brake cylinder [message #219202 is a reply to message #219174] |
Tue, 20 August 2013 01:34 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Glen,
I cannot say that it will stop that much better, but lessens a chance o
sliding the back two.
Maybe by not sliding the rear, there is always a chance that you can stop
sooner.
All the weekends we spent slamming on brakes to better understand the
effect of avoiding skidding has been an education in its self. This concept
of having different size wheel cylinders was first published by Fritz Slama
back in 1985.
I can tell you that between myself, Nick G, Chuck A, and Rick F.
we have more experience testing rear brakes.
Others like to think they have done
Drop me a note and I will get you the part#.
On Mon, Aug 19, 2013 at 6:46 PM, Glenn Giere <glenngiere@gmail.com> wrote:
>
>
> I understand rear braking can be enhanced by replacing the stock wheel
> cylinder on the mid axel with one that has a larger bore. Can anyone help
> me with a part number for that cylinder?
>
> Glenn
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
Re: Large bore rear wheel brake cylinder [message #219352 is a reply to message #219174] |
Tue, 20 August 2013 22:33 |
|
Matt Colie
Messages: 8547 Registered: March 2007 Location: S.E. Michigan
Karma: 7
|
Senior Member |
|
|
Glenn Giere wrote on Mon, 19 August 2013 21:46 | I understand rear braking can be enhanced by replacing the stock brake cylinder on the mid axel with one that has a larger bore. Can anyone help me with a part number for that cylinder?
Glenn
|
Glenn,
Yes, that will enhance it some, but want to make the rear brakes work right? Get the "Reaction Arm" set aka floating rear brake kit and do that. Yes it is more expansive, but it is worth it - IMDCO. If you will be at Brason, drive and brake mine. You don't have to mess with anything you don't want to, it still has a parking brake and the original master cylinder.
Matt
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|