GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Re: [GMCnet] ragusa ladder
Re: [GMCnet] ragusa ladder [message #217828] Sun, 11 August 2013 15:43 Go to next message
KB is currently offline  KB   United States
Messages: 1262
Registered: September 2009
Karma: 0
Senior Member
> Sorry no pics. I tried to assenble the ladder and hang it on the roof. When i make it fit to the rear cap, the angles of the feet on the roof are way off.
> Would expect them to be a near fit

I believe the Ragusa ladders have two different angles on the
aluminum feet. One is flat for use closer to the center of the roof,
and the other is angled. Make sure you have two different feet
and that they're on the correct side of the ladder for where
you're trying to mount it.

If that fails, the ragusa folks are usually very helpful.

Karen
1973 23'
1975 26'



_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Karen 1975 26' San Jose, CA
Re: [GMCnet] ragusa ladder [message #217920 is a reply to message #217828] Sun, 11 August 2013 23:21 Go to previous messageGo to next message
appie is currently offline  appie   Denmark
Messages: 902
Registered: April 2013
Location: denmark
Karma: 2
Senior Member
thanks Karen I am aware of the different feet

I'll go to ragusa for hælp


Appie eleganza 76 "Olga" now sadly sold 6 wheel discbrake Quadrabags Springfield stage 2 462 olds Manny tranny ( pictures at http://www.gmcmhphotos.com/photos/g6489-olga.html Fulltiming in Europe july 2014 til july 2016 Denmark
Re: [GMCnet] ragusa ladder [message #217929 is a reply to message #217920] Sun, 11 August 2013 23:50 Go to previous messageGo to next message
sgltrac is currently offline  sgltrac   United States
Messages: 2797
Registered: April 2011
Karma: 1
Senior Member
Is that pronounced hayelp? My keyboard won't do that now matter how many cocktails I've had ;)

Todd Sullivan

Sully
77 royale
Seattle

On Aug 11, 2013, at 9:21 PM, lenze middelberg <lenze@middelberg.dk> wrote:

>
>
> thanks Karen I am aware of the different feet
>
> I'll go to ragusa for hælp
>
> --
> Appie
> eleganza 76
> Denmark
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist


Sully 77 Royale basket case. Future motorhome land speed record holder(bucket list) Seattle, Wa.
Re: [GMCnet] ragusa ladder [message #217934 is a reply to message #217929] Mon, 12 August 2013 01:23 Go to previous messageGo to next message
appie is currently offline  appie   Denmark
Messages: 902
Registered: April 2013
Location: denmark
Karma: 2
Senior Member
Ya funny. I spelled the Danish way. Pronounces help

Appie eleganza 76 "Olga" now sadly sold 6 wheel discbrake Quadrabags Springfield stage 2 462 olds Manny tranny ( pictures at http://www.gmcmhphotos.com/photos/g6489-olga.html Fulltiming in Europe july 2014 til july 2016 Denmark
Re: [GMCnet] ragusa ladder [message #217937 is a reply to message #217929] Mon, 12 August 2013 02:00 Go to previous message
ljdavick is currently offline  ljdavick   United States
Messages: 3548
Registered: March 2007
Location: Fremont, CA
Karma: -3
Senior Member
Does looking at the picture on Ragusa's site help at all?

<http://www.ragusarv.com>

Larry Davick
Fremont, Ca.
1976(ish) Palm Beach
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy
Previous Topic: Re: [GMCnet] Blog?
Next Topic: Part Numbers Diesel fan and is it worth looking for
Goto Forum:
  


Current Time: Wed Sep 25 09:29:05 CDT 2024

Total time taken to generate the page: 0.00641 seconds