GMCforum: GMCnet » AC comp removal

Home » Public Forums » GMCnet » AC comp removal

Show: Today's Messages :: Polls :: Message Navigator

AC comp removal [message #214152]

Fri, 12 July 2013 16:00

skip2

Messages: 544
Registered: September 2011
Location: Winter Haven,FL (center o...

Karma: 3

Senior Member

Good afternoon fellow asylum patients,
Awhile back someone mentioned a mod when removing the AC compressor to make servicing at a later date easier, something about replacing a bolt with a stud. I'm going to tackle valve seals and the left looks like a cake walk but the right has that 30 lb. weight on the top of it and just trying to do all I can to make it easy. I've got a pretty bare bones motor since the PO did the whole Edelbrock top end thing and it is literally a 12000lb hot rod.
Thanks.
Skip Hartline

74 Canyon Lands, FiTech, 3.7 FD LSD, Manny Tranny, Springfield Distributor, 2001 Chevy Tracker Ragtop Towd

Report message to a moderator

Re: AC comp removal [message #214197 is a reply to message #214152]

Sat, 13 July 2013 06:09

Tilerpep

Messages: 404
Registered: June 2013
Location: Raleigh, NC

Karma: 7

Senior Member

http://gmc.mybirdfeeder.net/GMCforum/index.php?t=msg&goto=205160&rid=2555#msg_205160]

Is this what you are talking about? I just took my compressor off this week for other reasons and it was not difficult to loosen bolts - they had all been worked on maybe 12 years ago. I made no mods, so maybe you won't have to either.

1975 Glenbrook, 1978 Royale rear bath Raleigh, NC

Report message to a moderator

Previous Topic:	Royale Batteries Question
Next Topic:	[GMCnet] Bobby Moore's GMC for sale (Tom Whitton)

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 20 07:21:05 CDT 2024

Total time taken to generate the page: 0.01836 seconds