How much ATF [message #212566] |
Thu, 27 June 2013 18:54 |
pzerkel
Messages: 212 Registered: September 2007 Location: Salisbury, IL
Karma: 0
|
Senior Member |
|
|
I am about to replace a Ragusa pan with a Rockwell pan. Much of the transmission fluid has seeped out of the Ragusa pan. So measuring the fluid I drain is probably not a good way to determine how much to replenish.
About how much ATF should I purchase for this project?
Paul Zerkel
'78 Eleganza II
Salisbury IL (near Springfield)
|
|
|
Re: How much ATF [message #212581 is a reply to message #212566] |
Thu, 27 June 2013 22:37 |
Carl S.
Messages: 4186 Registered: January 2009 Location: Tucson, AZ.
Karma: 13
|
Senior Member |
|
|
pzerkel wrote on Thu, 27 June 2013 16:54 | I am about to replace a Ragusa pan with a Rockwell pan. Much of the transmission fluid has seeped out of the Ragusa pan. So measuring the fluid I drain is probably not a good way to determine how much to replenish.
About how much ATF should I purchase for this project?
|
I would make sure I had at least six quarts on hand, maybe eight to be on the safe side. When I installed a Rockwell pan I believe I ended up putting six quarts in it to get it to the full mark (hot)
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
|
|
|