Home » Public Forums » GMCnet » [GMCnet] I just want the CORRECT part
| [GMCnet] I just want the CORRECT part [message #210323] |
Sat, 08 June 2013 09:52  |
BobDunahugh
Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA
Karma: 11
|
Senior Member |
|
|
In my ordering parts from Jim K. I forgot the final drive cover gasket. So I looked up the part # in my booklet. It listed Fel-Pro #RDS 55034. I called O"Reilly's. They said they would have it the next day. GREAT. I picked it up and take it home so I can finish changing the gear lube in both GMC's. I had pulled the covers the day before to let them drain over night. One had 29,000 miles on mine. The other had never been changed. Open the boxes, and neither gasket had the correct vented gasket. If I hadn't been a dues paying club member. I would have not known that the gaskets from Fel-Pro were WRONG. Looked perfect, but no vent. So I got on the phone to Jim K. The Fel-Pro gasket that I got from Jim K had the same part # as the one from O'Reilly's. Jim K. got me the CORRECT part in the box. So, Thank you to Jim K, and all the vendors for putting their MONEY on the line. And doing a great job for us. And I hope you all are paid well enough to make it worth your while. Bob
Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] I just want the CORRECT part [message #210342 is a reply to message #210323] |
Sat, 08 June 2013 13:21  |
peabody
Messages: 126
Registered: May 2011
Location: steamboat springs, co
Karma: 0
|
Senior Member |
|
|
When in need I always try one of our suppliers. It is always the right part.
Bill Schurman
Steamboat, Springs, CO Ski Town USA
at the base of Rabbit Ears Pass (7% grade)
'78 Palm Beach TZE 168V100258
'66 Porsche 912
'97 Expedition
> From: yenko108@hotmail.com
> To: gmclist@temp.gmcnet.org
> Date: Sat, 8 Jun 2013 09:52:14 -0500
> Subject: [GMCnet] I just want the CORRECT part
>
> In my ordering parts from Jim K. I forgot the final drive cover gasket. So I looked up the part # in my booklet. It listed Fel-Pro #RDS 55034. I called O"Reilly's. They said they would have it the next day. GREAT. I picked it up and take it home so I can finish changing the gear lube in both GMC's. I had pulled the covers the day before to let them drain over night. One had 29,000 miles on mine. The other had never been changed. Open the boxes, and neither gasket had the correct vented gasket. If I hadn't been a dues paying club member. I would have not known that the gaskets from Fel-Pro were WRONG. Looked perfect, but no vent. So I got on the phone to Jim K. The Fel-Pro gasket that I got from Jim K had the same part # as the one from O'Reilly's. Jim K. got me the CORRECT part in the box. So, Thank you to Jim K, and all the vendors for putting their MONEY on the line. And doing a great job for us. And I hope you all are paid well enough to make it worth your while. Bo
b
> Dunahugh
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] I just want the CORRECT part [message #210344 is a reply to message #210342] |
Sat, 08 June 2013 13:36 |
Kingsley Coach
Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
I thought there was a way to use the new model even if it wasn't vented?????
I dunno....
Mike in NS
On Sat, Jun 8, 2013 at 3:21 PM, bill schurman <lizzie1243@hotmail.com>wrote:
> When in need I always try one of our suppliers. It is always the right
> part.
>
> Bill Schurman
> Steamboat, Springs, CO Ski Town USA
> at the base of Rabbit Ears Pass (7% grade)
> '78 Palm Beach TZE 168V100258
> '66 Porsche 912
> '97 Expedition
>
>
> > From: yenko108@hotmail.com
> > To: gmclist@temp.gmcnet.org
> > Date: Sat, 8 Jun 2013 09:52:14 -0500
> > Subject: [GMCnet] I just want the CORRECT part
> >
> > In my ordering parts from Jim K. I forgot the final drive cover gasket.
> So I looked up the part # in my booklet. It listed Fel-Pro #RDS 55034. I
> called O"Reilly's. They said they would have it the next day. GREAT. I
> picked it up and take it home so I can finish changing the gear lube in
> both GMC's. I had pulled the covers the day before to let them drain over
> night. One had 29,000 miles on mine. The other had never been changed. Open
> the boxes, and neither gasket had the correct vented gasket. If I hadn't
> been a dues paying club member. I would have not known that the gaskets
> from Fel-Pro were WRONG. Looked perfect, but no vent. So I got on the phone
> to Jim K. The Fel-Pro gasket that I got from Jim K had the same part # as
> the one from O'Reilly's. Jim K. got me the CORRECT part in the box. So,
> Thank you to Jim K, and all the vendors for putting their MONEY on the
> line. And doing a great job for us. And I hope you all are paid well enough
> to make it worth your while. Bo
> b
> > Dunahugh
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] I just want the CORRECT part [message #210345 is a reply to message #210342] |
Sat, 08 June 2013 13:43 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
I cannot do every thing here as were doing so much 6-7 days a week, but
when it comes to parts, we catch things like wrong part in a box or parts
missing,etc.
John in receiving catches some and Nick and I catch some along with our
mechanics.
We are always on the phone with the other GMC shops so we try to stay on
top.
On Sat, Jun 8, 2013 at 11:21 AM, bill schurman <lizzie1243@hotmail.com>wrote:
> When in need I always try one of our suppliers. It is always the right
> part.
>
> Bill Schurman
> Steamboat, Springs, CO Ski Town USA
> at the base of Rabbit Ears Pass (7% grade)
> '78 Palm Beach TZE 168V100258
> '66 Porsche 912
> '97 Expedition
>
>
> > From: yenko108@hotmail.com
> > To: gmclist@temp.gmcnet.org
> > Date: Sat, 8 Jun 2013 09:52:14 -0500
> > Subject: [GMCnet] I just want the CORRECT part
> >
> > In my ordering parts from Jim K. I forgot the final drive cover gasket.
> So I looked up the part # in my booklet. It listed Fel-Pro #RDS 55034. I
> called O"Reilly's. They said they would have it the next day. GREAT. I
> picked it up and take it home so I can finish changing the gear lube in
> both GMC's. I had pulled the covers the day before to let them drain over
> night. One had 29,000 miles on mine. The other had never been changed. Open
> the boxes, and neither gasket had the correct vented gasket. If I hadn't
> been a dues paying club member. I would have not known that the gaskets
> from Fel-Pro were WRONG. Looked perfect, but no vent. So I got on the phone
> to Jim K. The Fel-Pro gasket that I got from Jim K had the same part # as
> the one from O'Reilly's. Jim K. got me the CORRECT part in the box. So,
> Thank you to Jim K, and all the vendors for putting their MONEY on the
> line. And doing a great job for us. And I hope you all are paid well enough
> to make it worth your while. Bo
> b
> > Dunahugh
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] I just want the CORRECT part [message #210347 is a reply to message #210345] |
Sat, 08 June 2013 13:48 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Mike,
You can do so , but it would e best to duplicate the channel they have as
it lessens a chance for grease to vent out.
Do not use sealent as it will plug the vent channel.
On Sat, Jun 8, 2013 at 11:43 AM, Jim Kanomata <jimkanomata@gmail.com> wrote:
> I cannot do every thing here as were doing so much 6-7 days a week, but
> when it comes to parts, we catch things like wrong part in a box or parts
> missing,etc.
> John in receiving catches some and Nick and I catch some along with our
> mechanics.
> We are always on the phone with the other GMC shops so we try to stay on
> top.
>
>
>
> On Sat, Jun 8, 2013 at 11:21 AM, bill schurman <lizzie1243@hotmail.com>wrote:
>
>> When in need I always try one of our suppliers. It is always the right
>> part.
>>
>> Bill Schurman
>> Steamboat, Springs, CO Ski Town USA
>> at the base of Rabbit Ears Pass (7% grade)
>> '78 Palm Beach TZE 168V100258
>> '66 Porsche 912
>> '97 Expedition
>>
>>
>> > From: yenko108@hotmail.com
>> > To: gmclist@temp.gmcnet.org
>> > Date: Sat, 8 Jun 2013 09:52:14 -0500
>> > Subject: [GMCnet] I just want the CORRECT part
>> >
>> > In my ordering parts from Jim K. I forgot the final drive cover gasket.
>> So I looked up the part # in my booklet. It listed Fel-Pro #RDS 55034. I
>> called O"Reilly's. They said they would have it the next day. GREAT. I
>> picked it up and take it home so I can finish changing the gear lube in
>> both GMC's. I had pulled the covers the day before to let them drain over
>> night. One had 29,000 miles on mine. The other had never been changed. Open
>> the boxes, and neither gasket had the correct vented gasket. If I hadn't
>> been a dues paying club member. I would have not known that the gaskets
>> from Fel-Pro were WRONG. Looked perfect, but no vent. So I got on the phone
>> to Jim K. The Fel-Pro gasket that I got from Jim K had the same part # as
>> the one from O'Reilly's. Jim K. got me the CORRECT part in the box. So,
>> Thank you to Jim K, and all the vendors for putting their MONEY on the
>> line. And doing a great job for us. And I hope you all are paid well enough
>> to make it worth your while. Bo
>> b
>> > Dunahugh
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> > _______________________________________________
>> > GMCnet mailing list
>> > Unsubscribe or Change List Options:
>> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Fremont,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] I just want the CORRECT part [message #210353 is a reply to message #210347] |
Sat, 08 June 2013 14:39 |
Kingsley Coach
Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
Thanks Jim
The real question is why would anyone use the wrong one when you have the
right one ! <g>
Mike in NS
On Sat, Jun 8, 2013 at 3:48 PM, Jim Kanomata <jimkanomata@gmail.com> wrote:
> Mike,
> You can do so , but it would e best to duplicate the channel they have as
> it lessens a chance for grease to vent out.
> Do not use sealent as it will plug the vent channel.
>
>
>
> On Sat, Jun 8, 2013 at 11:43 AM, Jim Kanomata <jimkanomata@gmail.com>
> wrote:
>
> > I cannot do every thing here as were doing so much 6-7 days a week, but
> > when it comes to parts, we catch things like wrong part in a box or parts
> > missing,etc.
> > John in receiving catches some and Nick and I catch some along with our
> > mechanics.
> > We are always on the phone with the other GMC shops so we try to stay on
> > top.
> >
> >
> >
> > On Sat, Jun 8, 2013 at 11:21 AM, bill schurman <lizzie1243@hotmail.com
> >wrote:
> >
> >> When in need I always try one of our suppliers. It is always the right
> >> part.
> >>
> >> Bill Schurman
> >> Steamboat, Springs, CO Ski Town USA
> >> at the base of Rabbit Ears Pass (7% grade)
> >> '78 Palm Beach TZE 168V100258
> >> '66 Porsche 912
> >> '97 Expedition
> >>
> >>
> >> > From: yenko108@hotmail.com
> >> > To: gmclist@temp.gmcnet.org
> >> > Date: Sat, 8 Jun 2013 09:52:14 -0500
> >> > Subject: [GMCnet] I just want the CORRECT part
> >> >
> >> > In my ordering parts from Jim K. I forgot the final drive cover
> gasket.
> >> So I looked up the part # in my booklet. It listed Fel-Pro #RDS 55034. I
> >> called O"Reilly's. They said they would have it the next day. GREAT.
> I
> >> picked it up and take it home so I can finish changing the gear lube in
> >> both GMC's. I had pulled the covers the day before to let them drain
> over
> >> night. One had 29,000 miles on mine. The other had never been changed.
> Open
> >> the boxes, and neither gasket had the correct vented gasket. If I hadn't
> >> been a dues paying club member. I would have not known that the gaskets
> >> from Fel-Pro were WRONG. Looked perfect, but no vent. So I got on the
> phone
> >> to Jim K. The Fel-Pro gasket that I got from Jim K had the same part #
> as
> >> the one from O'Reilly's. Jim K. got me the CORRECT part in the box. So,
> >> Thank you to Jim K, and all the vendors for putting their MONEY on the
> >> line. And doing a great job for us. And I hope you all are paid well
> enough
> >> to make it worth your while. Bo
> >> b
> >> > Dunahugh
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > _______________________________________________
> >> > GMCnet mailing list
> >> > Unsubscribe or Change List Options:
> >> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >>
> >> _______________________________________________
> >> GMCnet mailing list
> >> Unsubscribe or Change List Options:
> >> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >>
> >
> >
> >
> > --
> > Jim Kanomata
> > Applied/GMC, Fremont,CA
> > jimk@appliedairfilters.com
> > http://www.appliedgmc.com
> > 1-800-752-7502
>
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Fremont,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
Goto Forum:
Current Time: Sun Sep 29 18:16:19 CDT 2024
Total time taken to generate the page: 0.00673 seconds
|
GMCforum
Search
Help
Register
Login
Home
