Home » Public Forums » GMCnet » [GMCnet] Harbor Freight Folding Chair
|
|
|
|
|
|
| Re: [GMCnet] Harbor Freight Folding Chair [message #209987 is a reply to message #209896] |
Wed, 05 June 2013 16:03   |
Don A
Messages: 895
Registered: October 2008
Location: Dallas, TX
Karma: 0
|
Senior Member |
|
|
<<best thing is that the arms are solid and you can push down on them to help>>
Thanks for the coupon Rob, saves $14 on a couple of them vs lowest adv price. I was just saying last night we should get new chairs and wanted to try this style.
All the "reviews" say this is a fantastic chair, even one from a guy that says he weighs 450 !!!! Worth a try to check out the table and pocket.
Would suggest Rob that when you push on the arms to get up, hold near the front or rear of the arm, near the legs, not in the middle of the span. 
Don Adams Dallas, TX
'76 26' Glenbrook, '90 Sidekick
rebuilt by R Archer, powered by J Bounds, Koba
[IMG]http://www.gmcmhphotos.com/photos/data/6109/G2.jpg[/IMG]
|
|
|
|
|
|
| Re: [GMCnet] Harbor Freight Folding Chair [message #209991 is a reply to message #209987] |
Wed, 05 June 2013 16:39 |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Don,
Actually I lied - a little bit - we got ours from Sam's several years ago (paid more) and they are steel. However, I sat in one of
these at HF (265 lb) and picked it up and wished I needed a couple as they were MUCH lighter than our steel ones.
Regards,
Rob M.
-----Original Message-----
From: Don Adams
<<best thing is that the arms are solid and you can push down on them to help>>
Thanks for the coupon Rob, saves $14 on a couple of them vs lowest adv price. I was just saying last night we should get new chairs
and wanted to try this style.
All the "reviews" say this is a fantastic chair, even one from a guy that says he weighs 450 !!!! Worth a try to check out the
table and pocket.
Would suggest Rob that when you push on the arms to get up, hold near the front or rear of the arm, near the legs, not in the
middle of the span. :)
--
Don
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
|
|
| Re: [GMCnet] Harbor Freight Folding Chair [message #210026 is a reply to message #209991] |
Wed, 05 June 2013 21:50 |
mickeysss
Messages: 1476
Registered: January 2012
Karma: 0
|
Senior Member |
|
|
I went out and bought two. the coupon states to the 4th and they gave it to me anyway being the 5th it is the 4th in australia.
they gave it to me being that the coupon came from australia. thanks rob.
mickey anaheimca 787 palm beach.
On Jun 5, 2013, at 2:39 PM, Rob Mueller wrote:
> Don,
>
> Actually I lied - a little bit - we got ours from Sam's several years ago (paid more) and they are steel. However, I sat in one of
> these at HF (265 lb) and picked it up and wished I needed a couple as they were MUCH lighter than our steel ones.
>
> Regards,
> Rob M.
>
> -----Original Message-----
> From: Don Adams
>
> <<best thing is that the arms are solid and you can push down on them to help>>
>
> Thanks for the coupon Rob, saves $14 on a couple of them vs lowest adv price. I was just saying last night we should get new chairs
> and wanted to try this style.
>
> All the "reviews" say this is a fantastic chair, even one from a guy that says he weighs 450 !!!! Worth a try to check out the
> table and pocket.
> Would suggest Rob that when you push on the arms to get up, hold near the front or rear of the arm, near the legs, not in the
> middle of the span. :)
> --
> Don
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
| Re: [GMCnet] Harbor Freight Folding Chair [message #210038 is a reply to message #210028] |
Wed, 05 June 2013 22:57 |
Don A
Messages: 895
Registered: October 2008
Location: Dallas, TX
Karma: 0
|
Senior Member |
|
|
You got even better Mac, the coupon says limit 3!
It may take all four to last as long as Rob's steel one?
Don Adams Dallas, TX
'76 26' Glenbrook, '90 Sidekick
rebuilt by R Archer, powered by J Bounds, Koba
[IMG]http://www.gmcmhphotos.com/photos/data/6109/G2.jpg[/IMG]
|
|
|
|
| Re: [GMCnet] Harbor Freight Folding Chair [message #210059 is a reply to message #210038] |
Thu, 06 June 2013 08:14 |
Kudzu
Messages: 377
Registered: November 2011
Location: Marshville, NC
Karma: 0
|
Senior Member |
|
|
Hmmm.... The linked picture says 1 per customer per day. Since it says
only on 6/6/2013, I assume 1 total...? I'll have to take someone with me.
Dan in NC
1976 Eleganza II
On 6/5/2013 11:57 PM, Don Adams wrote:
>
>
> You got even better Mac, the coupon says limit 3!
>
> It may take all four to last as long as Rob's steel one?
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
1976 Eleganza II
1996 Chevy Impala SS
1999 Kawasaki Vulcan Nomad
|
|
|
|
|
|
|
|
| Re: [GMCnet] Harbor Freight Folding Chair [message #210070 is a reply to message #209896] |
Thu, 06 June 2013 10:23 |
Carl S.
Messages: 4186
Registered: January 2009
Location: Tucson, AZ.
Karma: 13
|
Senior Member |
|
|
We have similar chairs we bought at Sportsman's Warehouse. Only ours are steel and heavy. The disadvantages of that are obvious, but the advantage is that they stay put in the wind. At several Saguaro Jetset rallies, the wind has come up over night, and blown everyone else's chairs all over, but ours have stayed right where we left them.
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
|
|
|
|
|
|
| Re: [GMCnet] Harbor Freight Folding Chair [message #210098 is a reply to message #210071] |
Thu, 06 June 2013 14:56 |
Don A
Messages: 895
Registered: October 2008
Location: Dallas, TX
Karma: 0
|
Senior Member |
|
|
My print of the coupon was also quite fuzzy. But the clerk made it work and I bought two.
The quality seems ok. The fabric is heavier than I thought it might be, even has a bit of a cushion in the seat. I love having the table and the several pockets attached. The light weight is nice for carrying, I'm sure it will blow in the wind and won't last forever. But for $23 looks like a good value.
Thanks Rob for the coupon and the heads up.
Don Adams Dallas, TX
'76 26' Glenbrook, '90 Sidekick
rebuilt by R Archer, powered by J Bounds, Koba
[IMG]http://www.gmcmhphotos.com/photos/data/6109/G2.jpg[/IMG]
|
|
|
|
| Re: [GMCnet] Harbor Freight Folding Chair [message #210138 is a reply to message #210064] |
Thu, 06 June 2013 21:52 |
Kudzu
Messages: 377
Registered: November 2011
Location: Marshville, NC
Karma: 0
|
Senior Member |
|
|
Thanks. After reading this note I boldly went in and got their last 3
today. I brought a spare coupon just in case. The cashier never even
read it, just scanned it.
Dan in NC
1976 Eleganza II
On 6/6/2013 10:00 AM, Rob Mueller wrote:
> Daniel,
>
> I have mastered Harbor Freight speak and when the coupon notes::
>
> "LIMIT 3 - VALID ONLY ON 6/6/13" Means you might be able to talk them into getting more than 3 and on another day as demonstrated by
> Mac in OKC.
>
> "Limit one coupon per customer per day." Means you can't bring two coupons and get six chairs.
>
> I got to know one of the managers at the local HF store and you'd be surprised what they can do vis-à-vis warranties and coupons.
>
> Speaking of HF warranties I normally do not buy extended warranties because I'm only here 3 months a year and I don't use the tools
> enough to burn them out. However, I bought one of their Vibratory Cleaners last year and the 2 year warranty was only $9.99 on top
> of the sale price so I went for it. This year I was using it to clean some bolts for the VW towd I'm building when the whole plastic
> top came flying off! I took it back and after being grilled by the HF warranty department in CA (I felt they were trying to get me
> to say I did something I wasn't supposed to do to deny the warranty) I got a new one. As the cashier was ringing up the sale she
> asked me if I wanted to buy an extended warranty on the new unit. I said no because I still had a year to go on the warranty. She
> noted that the two year warranty on the unit I brought in was "used up." I said no as the warranty was $19.99 because the unit was
> not on sale.
>
> Bottom line: HF extended warranties are actually one time replacement warranty within the warranty period.
>
> Regards,
> Rob M.
>
>
> -----Original Message-----
> From: Daniel Jarvis
>
> Hmmm.... The linked picture says 1 per customer per day. Since it says
> only on 6/6/2013, I assume 1 total...? I'll have to take someone with me.
>
> Dan
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
1976 Eleganza II
1996 Chevy Impala SS
1999 Kawasaki Vulcan Nomad
|
|
|
|
| Re: [GMCnet] Harbor Freight Folding Chair [message #210140 is a reply to message #209896] |
Thu, 06 June 2013 22:16 |
Cadillackeeper
Messages: 464
Registered: October 2012
Location: Fort Lauderdale
Karma: 1
|
Senior Member |
|
|
I have a wonderful world with folding tables and chairs and decorations outdoor fire,
video, real cool. However I am now researching some inflateable stuff for a soft place for the bottom.Its tough to spend any real time in any style chair even with cushions.
I have it all packed proper too with space to spare.
77 455 Elaganza II and 67 Animal, Built 500 Powered Eldo
|
|
|
|
|
|
| Re: [GMCnet] Harbor Freight Folding Chair [message #210161 is a reply to message #210150] |
Fri, 07 June 2013 01:41 |
 |
ljdavick
Messages: 3548
Registered: March 2007
Location: Fremont, CA
Karma: -3
|
Senior Member |
|
|
Let us know how the beer drinking goes!
Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, CA
On Jun 6, 2013, at 9:26 PM, Mickey Space Ship Shuttle wrote:
>
> My guy could not read it well for about 5 minutes, it was for the day before but i stated it was from down under
>
> and it was still that day there. he took it. Mine was very small.
>
> mickey best regards, anaheim ca. 77 palm beach.
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy
|
|
|
|
Goto Forum:
Current Time: Sat Sep 28 00:28:16 CDT 2024
Total time taken to generate the page: 0.02442 seconds
|
GMCforum
Search
Help
Register
Login
Home
