GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » GMCWS Rally Swap Meet
GMCWS Rally Swap Meet [message #203421] Tue, 02 April 2013 12:44 Go to next message
Carl S. is currently offline  Carl S.   United States
Messages: 4186
Registered: January 2009
Location: Tucson, AZ.
Karma: 13
Senior Member
Unfortunately, due to work obligations, I will not be able to make it to the rally until Thursday morning. Looking at the schedule, I noticed the swap meet is set up for Wednesday AM. I am thinking about ditching work for a few hours and running down there with some excess stuff I have left over from various projects.

Would anyone be interested in any of the following?

4 - rear drum brake assemblies, incl backing plates

4 - rear brake drums

5 - 16" "Alcoa look alike" wheel covers (SS)

1 - lightly used Suburban 3-burner range top (SS)

1 - original GMC stainless steel double bowl sink

1 - kitchen sink faucet

1 - original GMC sink insert cutting board

1 set "horse collar" brackets

If so. I might run down for the swap meet on Wednesday. Otherwise, I'll see you guys on Thursday.

Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member

Report message to a moderator

Re: GMCWS Rally Swap Meet [message #203422 is a reply to message #203421] Tue, 02 April 2013 12:47 Go to previous messageGo to next message
Carl S. is currently offline  Carl S.   United States
Messages: 4186
Registered: January 2009
Location: Tucson, AZ.
Karma: 13
Senior Member
Carl S. wrote on Tue, 02 April 2013 10:44

Unfortunately, due to work obligations, I will not be able to make it to the rally until Thursday morning. Looking at the schedule, I noticed the swap meet is set up for Wednesday AM. I am thinking about ditching work for a few hours and running down there with some excess stuff I have left over from various projects.

Would anyone be interested in any of the following?

4 - rear drum brake assemblies, incl backing plates

4 - rear brake drums

5 - 16" "Alcoa look alike" wheel covers (SS)

1 - lightly used Suburban 3-burner range top (SS)

1 - original GMC stainless steel double bowl sink

1 - kitchen sink faucet

1 - original GMC sink insert cutting board

1 set "horse collar" brackets

If so. I might run down for the swap meet on Wednesday. Otherwise, I'll see you guys on Thursday.



Oh, I also have a grey laminate counter top that the PO installed:

http://www.gmcmhphotos.com/photos/bruce-and-elizabeth-tara-75-pb-from-start-to-almost-finished/p4581.html

Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member

Report message to a moderator

Re: GMCWS Rally Swap Meet [message #203431 is a reply to message #203421] Tue, 02 April 2013 14:22 Go to previous messageGo to next message
A Hamilto is currently offline  A Hamilto   United States
Messages: 4508
Registered: April 2011
Karma: 39
Senior Member
Carl S. wrote on Tue, 02 April 2013 12:44

...Would anyone be interested in any of the following?
.
.
.
5 - 16" "Alcoa look alike" wheel covers (SS)
I won't be going to the swap meet, but if you are practically giving away the wheel covers, I might be interested (and if you are willing to go through the hassle to mail them).
Things that don't increase mileage or improve safety or functionality are low on my todo lists and budget. But if the price is right, I can add some bling.

Report message to a moderator

Re: GMCWS Rally Swap Meet [message #203433 is a reply to message #203431] Tue, 02 April 2013 14:28 Go to previous messageGo to next message
Carl S. is currently offline  Carl S.   United States
Messages: 4186
Registered: January 2009
Location: Tucson, AZ.
Karma: 13
Senior Member
Sorry, I'm not interested in shipping them. That's why I'm hoping to sell them at the swap meet. I may consider another sales attempt, probably Craig's List, locally, if I don't find a buyer there.

Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member

Report message to a moderator

Re: GMCWS Rally Swap Meet [message #203439 is a reply to message #203433] Tue, 02 April 2013 15:23 Go to previous messageGo to next message
SteveW is currently offline  SteveW   United States
Messages: 538
Registered: June 2005
Location: Southern California - Ora...
Karma: 1
Senior Member

Carl -

Are you sure they're not 16.5" ??

Might be a stop-gap until I get to some real Alcoas...

Thanks,
Steve W

Steve W 1973 : 23' Southern California

Report message to a moderator

Re: GMCWS Rally Swap Meet [message #203441 is a reply to message #203439] Tue, 02 April 2013 15:38 Go to previous messageGo to next message
Carl S. is currently offline  Carl S.   United States
Messages: 4186
Registered: January 2009
Location: Tucson, AZ.
Karma: 13
Senior Member
No, they are 16". The PO had installed a full set (7) of 16" steel wheels on the coach with 225/75R16 tires. (since taken in trade for the Eagles I have now)

Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member

Report message to a moderator

Re: GMCWS Rally Swap Meet [message #203481 is a reply to message #203421] Wed, 03 April 2013 08:55 Go to previous messageGo to next message
armandminnie is currently offline  armandminnie   United States
Messages: 864
Registered: May 2009
Location: Marana, AZ
Karma: 2
Senior Member
Carl S. wrote on Tue, 02 April 2013 10:44

I noticed the swap meet is set up for Wednesday AM.


We didn't say anything about it on the schedule but I assume that most stuff that doesn't sell on Wed. a.m. will still be on display and for sale for the rest of the rally.

Armand Minnie
Marana, AZ
'76 Eleganza II TZE166V103202
visit my gmc blog
click here to visit gmcws.org

Report message to a moderator

Re: GMCWS Rally Swap Meet [message #203485 is a reply to message #203421] Wed, 03 April 2013 09:41 Go to previous messageGo to next message
SteveW is currently offline  SteveW   United States
Messages: 538
Registered: June 2005
Location: Southern California - Ora...
Karma: 1
Senior Member

Thanks Armand -

I sure hope so because we won't be arriving until Wednesday evening...

Steve W

Steve W 1973 : 23' Southern California

Report message to a moderator

Re: [GMCnet] GMCWS Rally Swap Meet [message #203597 is a reply to message #203481] Thu, 04 April 2013 06:54 Go to previous messageGo to next message
Steven Ferguson is currently offline  Steven Ferguson   United States
Messages: 3447
Registered: May 2006
Karma: 0
Senior Member
I plan on bringing quite a bit of stuff. Looks like I'm going to need a
few hour time slot for a paint restoration seminar. Perhaps during the
open coach day when nothing is slated for indoors.


On Wed, Apr 3, 2013 at 6:55 AM, Armand Minnie <armand@minniebiz.com> wrote:

>
>
> Carl S. wrote on Tue, 02 April 2013 10:44
> > I noticed the swap meet is set up for Wednesday AM.
>
>
> We didn't say anything about it on the schedule but I assume that most
> stuff that doesn't sell on Wed. a.m. will still be on display and for sale
> for the rest of the rally.
> --
> Armand Minnie
> Marana, AZ
> '76 Eleganza II TZE166V103202
> http://www.minniebiz.com
> http://www.gmcws.org
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Take care,
Steve
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: GMCWS Rally Swap Meet [message #203637 is a reply to message #203421] Thu, 04 April 2013 13:52 Go to previous messageGo to next message
armandminnie is currently offline  armandminnie   United States
Messages: 864
Registered: May 2009
Location: Marana, AZ
Karma: 2
Senior Member
Steve Ault just sent me a list of stuff he is bringing to sell at our swap meet. He will only be there for one day though. He included an email address and a phone number (below)

Complete Engine Hoist
(allows engine removal thru side door)
Solar Panels
16,000 BTU Suburban Furnace (like new)
Macerator (used)
GMC Manuals and Display Board for car shows
SUSPENSION PARTS
2 Rebuilt (reinforced) lower control arms
Good used bushings
2 New Firestone Airbags
Miscellaneous air lines
Torsion Bar (GMC)
Stainless Steel air tank
Left and Right complete rebuilt hub/knuckle/Bearing/
Rotor (with grease zerks) — Complete assemblies – I got
over 100,000 miles on this type bearing/knuckle assembly
High pressure grease for front bearings
New Rear Brake Hoses
New Front Brake Hoses
4 used asbestos brake shoes
Used electric vacuum pump (brake booster assist)
Inner CV joint (complete)
New outer CV joint boots with grease
Speedometer cables
Used Transmission dipstick and tube
Used Transmission governors
New Drive Axle (jackshaft) carrier bearing
Final Drive seals
Used alternator
Used hydraulic windshield wiper motor
Used water lines (plastic)
ENGINE PARTS
Complete 455 Rebuilt Engine (70 Block) steel crank,
hardened valve seats
Used Choke Tubes
Block for PVC (newer car engine intakes)
HEI Distributor (complete)
K&N Air Filter (life time guarantee)
Used Quadrajet carburetor
New Radiator Hose (lower)
New Radiator Hose (upper)
New Radiator Overflow Tank
Used engine Oil dipstick and tube
Hi Volume (cast impeller) water pump
2 sets 455 exhaust manifolds (left and right)
New Felspro heavy duty gaskets
Exhaust manifold bolt locks
Gasoline fume canister (2 port)
New engine oil cooler line to radiator
Adapter (for cooler lines at oil filter)
Miscellaneous gaskets / fan belts /
Steve Ault
gsajourney@yahoo.com
520.603.5342

Armand Minnie
Marana, AZ
'76 Eleganza II TZE166V103202
visit my gmc blog
click here to visit gmcws.org

Report message to a moderator

Re: [GMCnet] GMCWS Rally Swap Meet [message #203699 is a reply to message #203637] Fri, 05 April 2013 07:47 Go to previous message
Steven Ferguson is currently offline  Steven Ferguson   United States
Messages: 3447
Registered: May 2006
Karma: 0
Senior Member
There's a treasure chest of parts for sure. Gonna be an excellent swap
meet.
Steve
Sierra Vista, AZ


On Thu, Apr 4, 2013 at 11:52 AM, Armand Minnie <armand@minniebiz.com> wrote:

>
>
> Steve Ault just sent me a list of stuff he is bringing to sell at our swap
> meet. He will only be there for one day though. He included an email
> address and a phone number (below)
>
> Complete Engine Hoist
> (allows engine removal thru side door)
> Solar Panels
> 16,000 BTU Suburban Furnace (like new)
> Macerator (used)
> GMC Manuals and Display Board for car shows
> SUSPENSION PARTS
> 2 Rebuilt (reinforced) lower control arms
> Good used bushings
> 2 New Firestone Airbags
> Miscellaneous air lines
> Torsion Bar (GMC)
> Stainless Steel air tank
> Left and Right complete rebuilt hub/knuckle/Bearing/
> Rotor (with grease zerks) &#8212; Complete assemblies &#8211; I got
> over 100,000 miles on this type bearing/knuckle assembly
> High pressure grease for front bearings
> New Rear Brake Hoses
> New Front Brake Hoses
> 4 used asbestos brake shoes
> Used electric vacuum pump (brake booster assist)
> Inner CV joint (complete)
> New outer CV joint boots with grease
> Speedometer cables
> Used Transmission dipstick and tube
> Used Transmission governors
> New Drive Axle (jackshaft) carrier bearing
> Final Drive seals
> Used alternator
> Used hydraulic windshield wiper motor
> Used water lines (plastic)
> ENGINE PARTS
> Complete 455 Rebuilt Engine (70 Block) steel crank,
> hardened valve seats
> Used Choke Tubes
> Block for PVC (newer car engine intakes)
> HEI Distributor (complete)
> K&N Air Filter (life time guarantee)
> Used Quadrajet carburetor
> New Radiator Hose (lower)
> New Radiator Hose (upper)
> New Radiator Overflow Tank
> Used engine Oil dipstick and tube
> Hi Volume (cast impeller) water pump
> 2 sets 455 exhaust manifolds (left and right)
> New Felspro heavy duty gaskets
> Exhaust manifold bolt locks
> Gasoline fume canister (2 port)
> New engine oil cooler line to radiator
> Adapter (for cooler lines at oil filter)
> Miscellaneous gaskets / fan belts /
> Steve Ault
> mailto:gsajourney@yahoo.com
> 520.603.5342
>
> --
> Armand Minnie
> Marana, AZ
> '76 Eleganza II TZE166V103202
> http://www.minniebiz.com
> http://www.gmcws.org
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Take care,
Steve
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Previous Topic: control arm bushings
Next Topic: Resting In Peace
Goto Forum:
  


Current Time: Wed Mar 19 07:11:29 CDT 2025

Total time taken to generate the page: 0.04049 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software