GMCforum: GMCnet » [GMCnet] aluminum wheels

Home » Public Forums » GMCnet » [GMCnet] aluminum wheels

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] aluminum wheels [message #202496]

Sat, 23 March 2013 06:51

mjbourgon

Messages: 259
Registered: May 2010

Karma: -1

Senior Member

Good morning all
I am looking for a set of Alcoa wheels for my new project. Does any one
have a set they no longer need or want and would like to sell
thanks
Marcel
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] aluminum wheels [message #202500 is a reply to message #202496]

Sat, 23 March 2013 10:08

Carl S.

Messages: 4186
Registered: January 2009
Location: Tucson, AZ.

Karma: 13

Senior Member

mjbourgon wrote on Sat, 23 March 2013 04:51

Marcel,

Good luck finding Alcoas at a reasonable price, or used. You might consider just going for a set of these from Jim K:

http://www.gmcmhphotos.com/photos/dothan-spring-convention-2013/p48164-eagle-new-look-i-can-t-tell-from-alcoa.html

Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member

Report message to a moderator

Re: [GMCnet] aluminum wheels [message #202511 is a reply to message #202500]

Sat, 23 March 2013 14:22

mjbourgon

Messages: 259
Registered: May 2010

Karma: -1

Senior Member

You never know. I have found you don't ask you never know
But I was thinking the same thing. I may just give Bounds a call after
he comes back from Rally
Marcel
On 3/23/2013 09:08, Carl Stouffer wrote:
>
> mjbourgon wrote on Sat, 23 March 2013 04:51
>> Good morning all
>> I am looking for a set of Alcoa wheels for my new project. Does any one
>> have a set they no longer need or want and would like to sell
>> thanks
>> Marcel
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
> Marcel,
>
> Good luck finding Alcoas at a reasonable price, or used. You might consider just going for a set of these from Jim K:
>
> http://www.gmcmhphotos.com/photos/dothan-spring-convention-2013/p48164-eagle-new-look-i-can-t-tell-from-alcoa.html

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] aluminum wheels [message #202566 is a reply to message #202500]

Sun, 24 March 2013 14:05

mike miller

Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon

Karma: 0

Senior Member

Carl S. wrote on Sat, 23 March 2013 08:08

Good luck finding Alcoas at a reasonable price, or used. ...

While I agree with you.... It CAN happen.

Not likely though.

I like JimK's new Eagle wheels. He had them remove the casting marks from the face of the wheel. (The "face" when used in a "front" position as we do on all our wheels.) They look much nicer than the earlier versions of the Eagle wheels.

The "old" style:

<http://www.gmcmhphotos.com/photos/data/5533/20110725_003rf.JPG>
These are mine without the caps supplied.

The "new" style:

<http://www.gmcmhphotos.com/photos/data/6329/100_0893_Medium_.JPG>

Like I said, much nicer! Good Job Jim!

I would suggest NOT using the Eagle style caps with these wheels. Why cover up nice shiny Aluminum with chromed cheap tin?

Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo' http://m000035.blogspot.com

Report message to a moderator

Re: [GMCnet] aluminum wheels [message #202567 is a reply to message #202566]

Sun, 24 March 2013 14:19

mjbourgon

Messages: 259
Registered: May 2010

Karma: -1

Senior Member

I am like the blind pig, every once in a while we find an acorn
Marcel
On 3/24/2013 13:05, Mike Miller wrote:
>
> Carl S. wrote on Sat, 23 March 2013 08:08
>> Good luck finding Alcoas at a reasonable price, or used. ...
>
> While I agree with you.... It CAN happen.
>
> Not likely though.
>
> I like JimK's new Eagle wheels. He had them remove the casting marks from the face of the wheel. (The "face" when used in a "front" position as we do on all our wheels.) They look much nicer than the earlier versions of the Eagle wheels.
>
> The "old" style:
>
> <http://www.gmcmhphotos.com/photos/data/5533/20110725_003rf.JPG>
> These are mine without the caps supplied.
>
> The "new" style:
>
> <http://www.gmcmhphotos.com/photos/data/6329/100_0893_Medium_.JPG>
>
> Like I said, much nicer! Good Job Jim!
>
> I would suggest NOT using the Eagle style caps with these wheels. Why cover up nice shiny Aluminum with chromed cheap tin?
>
>

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] aluminum wheels [message #202568 is a reply to message #202567]

Sun, 24 March 2013 15:24

mojoe

Messages: 319
Registered: November 2012
Location: Monroe, NC

Karma: 0

Senior Member

Marcel, on the east coast we say blind squirrl !! and finding a nut..lol

Joe Kemenczky.. 1975 Eleganza ll " Odie " 75,000 miles.. "When I was younger, I could remember anything, whether it had happened or not." - Mark Twain. .

Report message to a moderator

Re: [GMCnet] aluminum wheels [message #202569 is a reply to message #202568]

Sun, 24 March 2013 16:26

mjbourgon

Messages: 259
Registered: May 2010

Karma: -1

Senior Member

When in Rome,
Marcel
On 3/24/2013 14:24, Joe Kemenczky wrote:
>
> Marcel, on the east coast we say blind squirrl !! and finding a nut..lol

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Previous Topic:	VIN location
Next Topic:	Exhaust System Advice Please?

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Nov 18 22:26:37 CST 2024

Total time taken to generate the page: 0.01227 seconds