Home » Public Forums » GMCnet » Wheel Covers
|
|
|
|
| Re: [GMCnet] Wheel Covers [message #202113 is a reply to message #202103] |
Tue, 19 March 2013 08:44   |
mojoe
Messages: 319
Registered: November 2012
Location: Monroe, NC
Karma: 0
|
Senior Member |
|
|
Want to part with them richard? Im still running 16.5 wheeels.
Joe Kemenczky..
1975 Eleganza ll " Odie " 75,000 miles..
"When I was younger, I could remember anything, whether it had happened or not." - Mark Twain.
.
|
|
|
|
|
|
|
|
|
|
| Re: Wheel Covers [message #202124 is a reply to message #202121] |
Tue, 19 March 2013 10:14 |
 |
Richard Andis
Messages: 261
Registered: January 2013
Location: HELL Paso, TX
Karma: 0
|
Senior Member |
|
|
Thanks, good info
I don't think these have ever been put on a vehicle. There's some sort of paint or film stuck on the outside face. May have been some sort of packing material. I'm a bit hesitant to clean it off. I'll take some pictures of the face side next time I'm going through the roof pod where they're currently stored.
Is the OEM wheel tapped for these all ready? Or, is that something the owner has to do.
Valhalla - 1978 GMC Royale rear twin [SOLD]
Walküre - 1974 VW Thing (Toad)
[Updated on: Tue, 19 March 2013 10:16] Report message to a moderator |
|
|
|
| Re: Wheel Covers [message #202126 is a reply to message #202085] |
Tue, 19 March 2013 10:20 |
Joe Weir
Messages: 769
Registered: February 2013
Location: Columbia, SC
Karma: 7
|
Senior Member |
|
|
Want to sell them?
Edit: whoops, snooze you lose. I would be interested in a set of stock hub caps if anyone has a set gathering dust.
76 Birchaven - "Wicked Mistress" - New engine, trans, alum radiator, brakes, Sully airbags, fuel lines, seats, adult beverage center... those Coachmen guys were really thinking about us second hand owners by including that beverage center...
Columbia, SC.
[Updated on: Tue, 19 March 2013 10:55] Report message to a moderator |
|
|
|
| Re: Wheel Covers [message #202134 is a reply to message #202124] |
Tue, 19 March 2013 11:46 |
GMC Cruse
Messages: 606
Registered: June 2009
Location: SE Michigan
Karma: 3
|
Senior Member |
|
|
| Richard Andis wrote on Tue, 19 March 2013 11:14 |
Thanks, good info
I don't think these have ever been put on a vehicle. There's some sort of paint or film stuck on the outside face. May have been some sort of packing material. I'm a bit hesitant to clean it off. I'll take some pictures of the face side next time I'm going through the roof pod where they're currently stored.
Is the OEM wheel tapped for these all ready? Or, is that something the owner has to do.
|
You need to drill and tap the holes. Scroll down here for a product review on them;
http://www.bdub.net/publications/GrueningerGMC.pdf
Mike K.
'75 PB
Southeast Michigan
|
|
|
|
| Re: [GMCnet] Wheel Covers [message #202171 is a reply to message #202134] |
Tue, 19 March 2013 17:41 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Those discs are SS and the lug nut hold them on.
We have them in our used stock.
I'm on the road to the Convention in Dothan.
Been pushing the 403 hard and still pulling 8-9 with 3.70.
Froze this AM when our standard Thermostat on engin stuck open.
I did my stand by trick and blocked off the air flow.
I Texas we were driving over 80 mph as the limit is 80.
On Tue, Mar 19, 2013 at 9:46 AM, Mike <carcruse@comcast.net> wrote:
>
>
> Richard Andis wrote on Tue, 19 March 2013 11:14
> > Thanks, good info
> >
> > I don't think these have ever been put on a vehicle. There's some sort
> of paint or film stuck on the outside face. May have been some sort of
> packing material. I'm a bit hesitant to clean it off. I'll take some
> pictures of the face side next time I'm going through the roof pod where
> they're currently stored.
> >
> > Is the OEM wheel tapped for these all ready? Or, is that something the
> owner has to do.
>
>
> You need to drill and tap the holes. Scroll down here for a product
> review on them;
>
> http://www.bdub.net/publications/GrueningerGMC.pdf
> --
> Mike K.
> '75 PB
> Southeast Michigan
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Wheel Covers [message #202180 is a reply to message #202171] |
Tue, 19 March 2013 18:14 |
James Hupy
Messages: 6806
Registered: May 2010
Karma: -62
|
Senior Member |
|
|
Jim, Your wireless remote air system arrived at the Peanut Festival Office
at 10:40 am this morning. Don't forget to pick it up when you get there.
Have a safe trip.
Jim Hupy
Salem, Or
78 Gmc Royale love those 403's.
On Mar 19, 2013 3:41 PM, "Jim Kanomata" <jimkanomata@gmail.com> wrote:
> Those discs are SS and the lug nut hold them on.
> We have them in our used stock.
> I'm on the road to the Convention in Dothan.
> Been pushing the 403 hard and still pulling 8-9 with 3.70.
> Froze this AM when our standard Thermostat on engin stuck open.
> I did my stand by trick and blocked off the air flow.
> I Texas we were driving over 80 mph as the limit is 80.
>
>
>
> On Tue, Mar 19, 2013 at 9:46 AM, Mike <carcruse@comcast.net> wrote:
>
> >
> >
> > Richard Andis wrote on Tue, 19 March 2013 11:14
> > > Thanks, good info
> > >
> > > I don't think these have ever been put on a vehicle. There's some sort
> > of paint or film stuck on the outside face. May have been some sort of
> > packing material. I'm a bit hesitant to clean it off. I'll take some
> > pictures of the face side next time I'm going through the roof pod where
> > they're currently stored.
> > >
> > > Is the OEM wheel tapped for these all ready? Or, is that something the
> > owner has to do.
> >
> >
> > You need to drill and tap the holes. Scroll down here for a product
> > review on them;
> >
> > http://www.bdub.net/publications/GrueningerGMC.pdf
> > --
> > Mike K.
> > '75 PB
> > Southeast Michigan
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Fremont,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Wheel Covers [message #202184 is a reply to message #202171] |
Tue, 19 March 2013 18:43 |
GMC Cruse
Messages: 606
Registered: June 2009
Location: SE Michigan
Karma: 3
|
Senior Member |
|
|
| jimk wrote on Tue, 19 March 2013 18:41 |
Those discs are SS and the lug nut hold them on.
We have them in our used stock.
I'm on the road to the Convention in Dothan.
Been pushing the 403 hard and still pulling 8-9 with 3.70.
Froze this AM when our standard Thermostat on engin stuck open.
I did my stand by trick and blocked off the air flow.
I Texas we were driving over 80 mph as the limit is 80.
On Tue, Mar 19, 2013 at 9:46 AM, Mike <carcruse@comcast.net> wrote:
>
>
> Richard Andis wrote on Tue, 19 March 2013 11:14
> > Thanks, good info
> >
> > I don't think these have ever been put on a vehicle. There's some sort
> of paint or film stuck on the outside face. May have been some sort of
> packing material. I'm a bit hesitant to clean it off. I'll take some
> pictures of the face side next time I'm going through the roof pod where
> they're currently stored.
> >
> > Is the OEM wheel tapped for these all ready? Or, is that something the
> owner has to do.
>
>
> You need to drill and tap the holes. Scroll down here for a product
> review on them;
>
> http://www.bdub.net/publications/GrueningerGMC.pdf
> --
> Mike K.
> '75 PB
> Southeast Michigan
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
Jim:
You are not correct. They are not held on by the lugnuts. One can remove the lugnuts without removing the cover.You can see the 2 holes for the Allen screws in Richard Andis's pictures. I have first hand knowledge of this plus the "product review" link I posted indicates you need to drill 2 holes in your wheel to fasten them.
Mike K.
'75 PB
Southeast Michigan
[Updated on: Tue, 19 March 2013 18:44] Report message to a moderator |
|
|
|
|
|
| Re: [GMCnet] Wheel Covers [message #202218 is a reply to message #202215] |
Tue, 19 March 2013 23:17 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Jim H,
IS YOU THERE IN Dothan?
I was hopping to earn the farthest travel award.
On Tue, Mar 19, 2013 at 9:06 PM, Ken Henderson <hend4800@bellsouth.net>wrote:
> I've got 4 of them, which I've had for years, loaded in the S-10 for
> Dothan, if anyone needs them CHEEP.
>
> Ken H.
>
> On Tue, Mar 19, 2013 at 12:05 AM, Richard Andis <randisintexas@gmail.com
> >wrote:
>
> >
> >
> > Anybody seen covers like this before? Heavy stainless steel. These came
> in
> > the goody-box that came with my Royale. PO (Bryan Wheat) thought they
> may
> > have been prototype wheel covers for the now defunct Wheat Motorcoach
> > Company (WMC).
> >
> >
> > http://www.gmcmhphotos.com/photos/data/6327/medium/00118.JPG
> > --
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Wheel Covers [message #202219 is a reply to message #202218] |
Tue, 19 March 2013 23:22 |
James Hupy
Messages: 6806
Registered: May 2010
Karma: -62
|
Senior Member |
|
|
Looks like you win again. I'm presently in Salem, but would love to be
there. Maybe next time. Try to sweet talk Kim into someplace WEST of the
Rockies. (grin)
Jim Hupy
Salem, Or.
78 Gmc Royale 403
On Mar 19, 2013 9:17 PM, "Jim Kanomata" <jimkanomata@gmail.com> wrote:
> Jim H,
> IS YOU THERE IN Dothan?
> I was hopping to earn the farthest travel award.
>
> On Tue, Mar 19, 2013 at 9:06 PM, Ken Henderson <hend4800@bellsouth.net
> >wrote:
>
> > I've got 4 of them, which I've had for years, loaded in the S-10 for
> > Dothan, if anyone needs them CHEEP.
> >
> > Ken H.
> >
> > On Tue, Mar 19, 2013 at 12:05 AM, Richard Andis <randisintexas@gmail.com
> > >wrote:
> >
> > >
> > >
> > > Anybody seen covers like this before? Heavy stainless steel. These came
> > in
> > > the goody-box that came with my Royale. PO (Bryan Wheat) thought they
> > may
> > > have been prototype wheel covers for the now defunct Wheat Motorcoach
> > > Company (WMC).
> > >
> > >
> > > http://www.gmcmhphotos.com/photos/data/6327/medium/00118.JPG
> > > --
> > >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Fremont,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Wheel Covers [message #202221 is a reply to message #202219] |
Tue, 19 March 2013 23:38 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Jim H, There has been some negativity raised from the California group
steming back few years.
I cannot talk about negativity, as I have and will do so, but not for
International.
Kim brings forth a refreshing view of working with the chapters in the
West, so were hoping to bring it ouy West with consideration and trust that
we will not make the type of mistakes as I saw done.
Sometimes few small mistakes are harder to get over than One big one.
Being dragged onto the board again, I feel Kim and Emery Stora
will address it way ahead of time.
How did you know about my package?
On Tue, Mar 19, 2013 at 9:22 PM, James Hupy <jamesh1296@gmail.com> wrote:
> Looks like you win again. I'm presently in Salem, but would love to be
> there. Maybe next time. Try to sweet talk Kim into someplace WEST of the
> Rockies. (grin)
> Jim Hupy
> Salem, Or.
> 78 Gmc Royale 403
> On Mar 19, 2013 9:17 PM, "Jim Kanomata" <jimkanomata@gmail.com> wrote:
>
> > Jim H,
> > IS YOU THERE IN Dothan?
> > I was hopping to earn the farthest travel award.
> >
> > On Tue, Mar 19, 2013 at 9:06 PM, Ken Henderson <hend4800@bellsouth.net
> > >wrote:
> >
> > > I've got 4 of them, which I've had for years, loaded in the S-10 for
> > > Dothan, if anyone needs them CHEEP.
> > >
> > > Ken H.
> > >
> > > On Tue, Mar 19, 2013 at 12:05 AM, Richard Andis <
> randisintexas@gmail.com
> > > >wrote:
> > >
> > > >
> > > >
> > > > Anybody seen covers like this before? Heavy stainless steel. These
> came
> > > in
> > > > the goody-box that came with my Royale. PO (Bryan Wheat) thought
> they
> > > may
> > > > have been prototype wheel covers for the now defunct Wheat Motorcoach
> > > > Company (WMC).
> > > >
> > > >
> > > > http://www.gmcmhphotos.com/photos/data/6327/medium/00118.JPG
> > > > --
> > > >
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > >
> >
> >
> >
> > --
> > Jim Kanomata
> > Applied/GMC, Fremont,CA
> > jimk@appliedairfilters.com
> > http://www.appliedgmc.com
> > 1-800-752-7502
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Wheel Covers [message #202222 is a reply to message #202221] |
Tue, 19 March 2013 23:41 |
James Hupy
Messages: 6806
Registered: May 2010
Karma: -62
|
Senior Member |
|
|
Jim, I sent it to you. Wanted to make sure that you got it.
Jim Hupy
On Mar 19, 2013 9:38 PM, "Jim Kanomata" <jimkanomata@gmail.com> wrote:
> Jim H, There has been some negativity raised from the California group
> steming back few years.
> I cannot talk about negativity, as I have and will do so, but not for
> International.
> Kim brings forth a refreshing view of working with the chapters in the
> West, so were hoping to bring it ouy West with consideration and trust that
> we will not make the type of mistakes as I saw done.
> Sometimes few small mistakes are harder to get over than One big one.
> Being dragged onto the board again, I feel Kim and Emery Stora
> will address it way ahead of time.
> How did you know about my package?
>
> On Tue, Mar 19, 2013 at 9:22 PM, James Hupy <jamesh1296@gmail.com> wrote:
>
> > Looks like you win again. I'm presently in Salem, but would love to be
> > there. Maybe next time. Try to sweet talk Kim into someplace WEST of the
> > Rockies. (grin)
> > Jim Hupy
> > Salem, Or.
> > 78 Gmc Royale 403
> > On Mar 19, 2013 9:17 PM, "Jim Kanomata" <jimkanomata@gmail.com> wrote:
> >
> > > Jim H,
> > > IS YOU THERE IN Dothan?
> > > I was hopping to earn the farthest travel award.
> > >
> > > On Tue, Mar 19, 2013 at 9:06 PM, Ken Henderson <hend4800@bellsouth.net
> > > >wrote:
> > >
> > > > I've got 4 of them, which I've had for years, loaded in the S-10 for
> > > > Dothan, if anyone needs them CHEEP.
> > > >
> > > > Ken H.
> > > >
> > > > On Tue, Mar 19, 2013 at 12:05 AM, Richard Andis <
> > randisintexas@gmail.com
> > > > >wrote:
> > > >
> > > > >
> > > > >
> > > > > Anybody seen covers like this before? Heavy stainless steel. These
> > came
> > > > in
> > > > > the goody-box that came with my Royale. PO (Bryan Wheat) thought
> > they
> > > > may
> > > > > have been prototype wheel covers for the now defunct Wheat
> Motorcoach
> > > > > Company (WMC).
> > > > >
> > > > >
> > > > > http://www.gmcmhphotos.com/photos/data/6327/medium/00118.JPG
> > > > > --
> > > > >
> > > > _______________________________________________
> > > > GMCnet mailing list
> > > > Unsubscribe or Change List Options:
> > > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > > >
> > >
> > >
> > >
> > > --
> > > Jim Kanomata
> > > Applied/GMC, Fremont,CA
> > > jimk@appliedairfilters.com
> > > http://www.appliedgmc.com
> > > 1-800-752-7502
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Fremont,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
Goto Forum:
Current Time: Thu Nov 14 10:08:34 CST 2024
Total time taken to generate the page: 0.03613 seconds
|
GMCforum
Search
Help
Register
Login
Home
