GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » PN for end bearing on 6KW Onan
PN for end bearing on 6KW Onan [message #201418] Tue, 12 March 2013 15:26
Jon payne is currently offline  Jon payne   United States
Messages: 495
Registered: May 2008
Karma: 1
Senior Member
Hello all,

I am going to replace the bearing that is on Armature and looking for an alternate part number. Onan wants over $70 for a $10 bearing. Does anyone have a source for this bearing, other than the Onan PN?

Also, those that have changed this bearing, what method did you use to press the new bearing on? Did you have to remove the Armature?

Jon

http://www.gmcmhphotos.com/photos/data/5835/OnanBearing.jpg



http://www.gmcmhphotos.com/photos/data/5835/OnanBearing.jpg

Jon Payne
76 Palm Beach
Westfield,IN

Report message to a moderator

Previous Topic: Replacing sections of the subfloor on a 73
Next Topic: How much for a NEW GMC ?
Goto Forum:
  


Current Time: Wed Jan 22 09:47:27 CST 2025

Total time taken to generate the page: 0.01060 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software