| [GMCnet] GMC Plaque Rights [message #200128] |
Wed, 27 February 2013 17:40  |
Tom Whitton
Messages: 235
Registered: February 2004
Location: Paducah, KY
Karma: 0
|
Senior Member |
|
|
Cost to non-vendor?
I don't know. Jim Kanomata and the other vendors need to answer that. As I understand it, Jim is going to suggest that everyone work on the lowest of margins in order that these plaques can be widely displayed. It will probably take a few days to work all this out but shouldn't take long. Ragusa has the molds and is ready to produce.
Tom Whitton
26 ft. GMC Concept
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
| Re: [GMCnet] GMC Plaque Rights [message #200140 is a reply to message #200131] |
Wed, 27 February 2013 19:10  |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Tom,
We will have those that we purchased from his stock at International
convention.
I'm trying to get Ragusa to quote on them, this way I can let other
vender's know.
what they will cost.
On Wed, Feb 27, 2013 at 3:55 PM, Thomas Phipps <tph1pp5@yahoo.com> wrote:
>
>
> Hope they make it to International. Please put me on the list.
> Tom, MS II
>
>
>
> --
> 1975 GMC Avion, under forever re-construction
> Vicksburg, MS. 3.7 miles from I-20
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: [GMCnet] GMC Plaque Rights [message #200240 is a reply to message #200191] |
Thu, 28 February 2013 23:52 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
I will follow up Friday and see where the cost wil fall.
Ron at Ragusa told me that there is lot of work to blast the surface for
painting and resursace the high point..
On Thu, Feb 28, 2013 at 12:36 PM, John Wright <powwerjon@gmail.com> wrote:
> Will post picture again, see this:
>
>
> http://www.gmcmhphotos.com/photos/items-for-sale/p30582-gmc-plaque-special-sale-price.html
>
> This will be sold by various GMC vendors to be determined soon. This is
> an old ad and the new pricing has yet to be established. Jim K is having
> the plaques manufactured by Ragusa. They will not be available from
> Ragusa. Stay tuned for further details.
>
> J.R. Wright
> The Bumper Bolt Guy
> powerjon1945@hotmail.com
>
>
>
> On Feb 28, 2013, at 2:53 PM, George Rudawsky <GeorgeRud@aol.com> wrote:
>
> >
> >
> > Hopefully someone will post a picture of these. I, too, am not sure
> what these are.
> > --
> > George Rudawsky
> > Chicago, IL
> > 75 Palm Beach
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: [GMCnet] GMC Plaque Rights [message #200290 is a reply to message #200273] |
Fri, 01 March 2013 19:07 |
emerystora
Messages: 4442
Registered: January 2004
Karma: 13
|
Senior Member |
|
|
If anyone wants to see the FMCA style plaques they are made by Kiley Mold Co. They used to make the metal (aluminum) plaques and probably can stil provide them. But they currently make the plastic ones for FMCA.
They can make specialty ones as well including smaller toad plates, key chain plates,hitch cover plates, etc.. Call Dennis Kiley 513-875-3223 for information.They are located in Fayetteville, OH.
Emery Stora
On Mar 1, 2013, at 2:26 PM, Robert Mueller wrote:
> Bob,
>
> I have the GMC plaque on the driver side of the rear window and the FMCA plaque on the passenger side of Double Trouble. The GMC
> plaque is a lot nicer looking; when I get to Houston I'll post a picture and you can see what I mean
>
> Regards,
> Rob M.
>
> -----Original Message-----
> From: Bob Moss
>
> Frankly, I think the plaque is nice to have but not need to have. I think being made from the metal alloy it looks crude. Would be
> much nicer made from a plastic like material like the FMCA logo plate. Just my opinion.
> Bob
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
