GMCforum: GMCnet » [GMCnet] Buying wheels tomorrow (Friday January 18)

Home » Public Forums » GMCnet » [GMCnet] Buying wheels tomorrow (Friday January 18)

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Buying wheels tomorrow (Friday January 18) [message #195755]

Thu, 17 January 2013 09:58

Robin Hood

Messages: 1078
Registered: April 2011

Karma: 3

Senior Member

Seven steel wheels from Southwest Wheel, item number 29587. It's a 16 inch
wheel with a 4.56 (4 and 9/16) hole and an 8 lug 6.5 inch bolt circle.
http://www.southwestwheel.com/store/p-1835-29587.aspx

It'll run about $720 for the wheels and another $110 for FedEx ground.

I'm on a budget or I would get pretty alloy rims from JimK. I'll be putting
in an order for some Onan exhaust parts as well.

Tires will be Walmart due not because of their stellar quality, but because
of the fact that there's always a Walmart around.

This weekend I will put at least the Royale, and possibly the Palm Beach up
on the jack stands I built.

--
Robin Hood
Jackson, MS
2003 Buick Lesabre
1968 Pontiac Catalina
1978 GMC Royale motorhome
1977 GMC Palm Beach motorhome
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Buying wheels tomorrow (Friday January 18) [message #195766 is a reply to message #195755]

Thu, 17 January 2013 11:26

A Hamilto

Messages: 4508
Registered: April 2011

Karma: 39

Senior Member

I believe Jim K has some steel 16 rims. Call him before you commit to the non-GMC vendor.

Report message to a moderator

Re: [GMCnet] Buying wheels tomorrow (Friday January 18) [message #195768 is a reply to message #195766]

Thu, 17 January 2013 11:37

Robin Hood

Messages: 1078
Registered: April 2011

Karma: 3

Senior Member

Oh, I didn't see steelies on his website. I figured he was into the
alloy-only biz. I'll certainly chekc with him, because I do want to
support our GMC vendors... also, maybe I can combine shipping on that
muffler. :)

On Thu, Jan 17, 2013 at 11:26 AM, A. <markbb1@netzero.com> wrote:
>
>
> I believe Jim K has some steel 16 rims. Call him before you commit to the non-GMC vendor.
> --
> '73 23' Sequoia For Camping
> '73 23' CanyonLands For Sale
> UA (Upper Alabama)
> "Time is money. If you use YOUR time, you get to keep YOUR money."
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

--
Robin Hood
Jackson, MS
2003 Buick Lesabre
1968 Pontiac Catalina
1978 GMC Royale motorhome
1977 GMC Palm Beach motorhome
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Buying wheels tomorrow (Friday January 18) [message #195772 is a reply to message #195768]

Thu, 17 January 2013 12:16

A Hamilto

Messages: 4508
Registered: April 2011

Karma: 39

Senior Member

Robin Hood wrote on Thu, 17 January 2013 11:37

Oh, I didn't see steelies on his website. I figured he was into the alloy-only biz. I'll certainly check with him, because I do want to support our GMC vendors... also, maybe I can combine shipping on that muffler. Smile

Smile

Jim K probably has more stuff NOT listed than listed. IIRC, when I was looking, he mentioned that he had some good used rims. They will be round and true (not as close as alloy, but...), and he stands behind his products.

Report message to a moderator

Re: [GMCnet] Buying wheels tomorrow (Friday January 18) [message #195785 is a reply to message #195755]

Thu, 17 January 2013 16:22

USAussie

Messages: 15912
Registered: July 2007
Location: Sydney, Australia

Karma: 6

Senior Member

Robin,

I clicked on the link and noted that the photo is of a wheel with a domed center section.

Before I bought them I would suggest you send them an email advising that you intend to put these wheels on a GMC motorhome and in
order for them to clear the front wheel brake calipers the center section of the wheel must be domed.

Ask them to confirm that they are domed and not angled.

Regards,
Rob M.
Sydney, Australia
AUS '75�Avion-The Blue Streak TZE365V100428
USA '75 Avion-Double Trouble TZE365V100426
�

-----Original Message-----
From: Robin Hood

Seven steel wheels from Southwest Wheel, item number 29587. It's a 16 inch
wheel with a 4.56 (4 and 9/16) hole and an 8 lug 6.5 inch bolt circle.
http://www.southwestwheel.com/store/p-1835-29587.aspx

It'll run about $720 for the wheels and another $110 for FedEx ground.

I'm on a budget or I would get pretty alloy rims from JimK. I'll be putting
in an order for some Onan exhaust parts as well.

Tires will be Walmart due not because of their stellar quality, but because
of the fact that there's always a Walmart around.

This weekend I will put at least the Royale, and possibly the Palm Beach up
on the jack stands I built.

Robin

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426

Report message to a moderator

Re: [GMCnet] Buying wheels tomorrow (Friday January 18) [message #195787 is a reply to message #195755]

Thu, 17 January 2013 17:06

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

Robin, What Rob said. That is a lot of money. Just make sure they work on your coach. If I was in a position to loan you the money for Eagles, I would do it. Hate to see you buy steel wheels if you really would rather have aluminum ones. You can always get most of your money back for Eagles or Alcoas. I don't think the steel ones will be worth a lot after you mount them. I am like you and pay cash for my stuff. I would buy 2 aluminum wheels til I had all 6.
Just some unwanted advice. Very Happy

Very Happy

Dan

3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer

Report message to a moderator

Re: [GMCnet] Buying wheels tomorrow (Friday January 18) [message #195790 is a reply to message #195785]

Thu, 17 January 2013 17:05

Robin Hood

Messages: 1078
Registered: April 2011

Karma: 3

Senior Member

I called Jim K. He's going to see what he has in the way of steel wheels. I
do want to support our vendors, and as long as it's reasonable I'll be more
than happy to buy wheels from him instead of Southwest wheel. For sure I'm
going to be ordering a muffler and other Onan parts as well as the black
tank, for which he has some ideas on what I can do that will give me a
better plumbing system than when the coach was new.

On Thursday, January 17, 2013, Robert Mueller wrote:

> Robin,
>
> I clicked on the link and noted that the photo is of a wheel with a domed
> center section.
>
>
>

--
Robin Hood
Jackson, MS
2003 Buick Lesabre
1968 Pontiac Catalina
1978 GMC Royale motorhome
1977 GMC Palm Beach motorhome
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Buying wheels tomorrow (Friday January 18) [message #195792 is a reply to message #195785]

Thu, 17 January 2013 17:14

Dave Mumert

Messages: 272
Registered: February 2004
Location: Olds, AB, Canada

Karma: 0

Senior Member

Hi Robin

Check out these photos of what you need for wheels.
http://www.gmcmhphotos.com/photos/g5763-steel-wheels.html

Don't forget to price in new nuts and potentially the squash plate that some
wheels need between the nuts and wheel. I don't know if this is just a Ford
thing or if GM used them as well.

Lug centered Eagle wheels are only $140 each so $108 for steel that may not
fit may not be a great saving.

Jim K may be able to save you a few dollars by providing lug centered wheels
instead of the hub centered ones.

Dave

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Buying wheels tomorrow (Friday January 18) [message #195798 is a reply to message #195755]

Thu, 17 January 2013 17:50

Cadillackeeper

Messages: 464
Registered: October 2012
Location: Fort Lauderdale

Karma: 1

Senior Member

I understand going to the smaller aftermarket alcoa wheel,but why not just stay
with stockers until all out shine.there is a plethura of tire choices in 16 but still
a handful of choices in 16.5.Or do you have a couple that are bent?

77 455 Elaganza II and 67 Animal, Built 500 Powered Eldo

Report message to a moderator

Re: [GMCnet] Buying wheels tomorrow (Friday January 18) [message #195801 is a reply to message #195798]

Thu, 17 January 2013 18:13

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma: -74

Senior Member

Nobody I know of but Firestone stil makes 16.5 tires - and they know it, and they are VERY proud of them.
�
--johnny
'76 23' transmode norris
'76 palm beach

From: anthony ezzo <ezzo@earthlink.net>
To: gmclist@temp.gmcnet.org
Sent: Thursday, January 17, 2013 6:50 PM
Subject: Re: [GMCnet] Buying wheels tomorrow (Friday January 18)

I understand going to the smaller aftermarket alcoa wheel,but why not just stay
with stockers until all out shine.there is a plethura of tire choices in 16 but still
a handful of choices in 16.5.Or do you have a couple that are bent?
--
77 455 Elaganza II and 67 Animal, Built 500 Powered Eldo
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

Re: [GMCnet] Buying wheels tomorrow (Friday January 18) [message #195802 is a reply to message #195755]

Thu, 17 January 2013 18:38

Cadillackeeper

Messages: 464
Registered: October 2012
Location: Fort Lauderdale

Karma: 1

Senior Member

I thought I posted before somewhere but I just got 8 tires 6 of them mounted and balanced at Pep-Boys for $84 a tire. They are 16.5 Futura Scrambler,made in us by cooper.Load D 2500lbs per tire at 65 psi There also is plenty chinese that are not
too,too bad either like a Road King or Power King those are E load almost 3500lbs
per tire and are more like $99. But the Tranceforce seems to be the one that most
like the best at $150 a tire so yes it is expensive.I should get a few years out of them
and hopefully by then I can afford Aluminum wheels and I really want a Visor!!!!

77 455 Elaganza II and 67 Animal, Built 500 Powered Eldo

Report message to a moderator

Re: [GMCnet] Buying wheels tomorrow (Friday January 18) [message #195816 is a reply to message #195798]

Thu, 17 January 2013 20:28

mike miller

Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon

Karma: 0

Senior Member

Cadillackeeper wrote on Thu, 17 January 2013 15:50

... but why not just stay with stockers ..

IIRC: One of Robin's coaches did not come with any wheels at all!

Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo' http://m000035.blogspot.com

Report message to a moderator

Re: [GMCnet] Buying wheels tomorrow (Friday January 18) [message #195819 is a reply to message #195816]

Thu, 17 January 2013 20:31

Robin Hood

Messages: 1078
Registered: April 2011

Karma: 3

Senior Member

Correct. The plan is to put the stock rims on the palm beach replacing the
junkyard rims i usef to limp it to the storage lot and get modern 16s for
the Royale.

On Thursday, January 17, 2013, Mike Miller wrote:

>
>
> Cadillackeeper wrote on Thu, 17 January 2013 15:50
> > ... but why not just stay with stockers ..
>
>
> IIRC: One of Robin's coaches did not come with any wheels at all!
>
>
> --
> Mike Miller -- Hillsboro, OR -- on the Black list
> (#1)'73 26' exPainted D. -- (#2)`78 23' Birchaven Rear Bath -- (#3)`77 23'
> Birchaven Side Bath
> http://m000035.blogspot.com
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Robin Hood
Jackson, MS
2003 Buick Lesabre
1968 Pontiac Catalina
1978 GMC Royale motorhome
1977 GMC Palm Beach motorhome
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Buying wheels tomorrow (Friday January 18) [message #195832 is a reply to message #195755]

Thu, 17 January 2013 21:25

JohnL455

Messages: 4447
Registered: October 2006
Location: Woodstock, IL

Karma: 12

Senior Member

In the day, Southwest had the special GMCer deal on Alcoas. But I think those days are gone. That's a lot of money for steels that could get you part way there in aluminum.

John Lebetski
Woodstock, IL
77 Eleganza II

Report message to a moderator

Re: [GMCnet] Buying wheels tomorrow (Friday January 18) [message #195839 is a reply to message #195755]

Thu, 17 January 2013 22:13

Cadillackeeper

Messages: 464
Registered: October 2012
Location: Fort Lauderdale

Karma: 1

Senior Member

Ham and Cheese,I did not know there were no wheels to start with.

77 455 Elaganza II and 67 Animal, Built 500 Powered Eldo

Report message to a moderator

Previous Topic:	Steering column replacement
Next Topic:	[GMCnet] Alcoa wheels -set of 4 for sale

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Oct 05 06:20:54 CDT 2024

Total time taken to generate the page: 0.00832 seconds