[GMCnet] Harbor Freight 19.2V Drill - Recall [message #195123] |
Tue, 08 January 2013 01:55 |
Rob Mueller
Messages: 3 Registered: August 2007
Karma: 0
|
Junior Member |
|
|
G'day,
John Sharpe got a recall notice from Harbor Freight and asked me to pass it on to the GMCnet.
Quote:
SAFETY RECALL 19.2 VOLT CORDLESS DRILL
DRILL MASTER ITEM# 96526
The metal components of the black trigger switch can wear down over time and with extended use allowing for metal to metal contact,
presenting an overheating or burn hazard.
Consumers should STOP USING THESE DRILLS IMMEDIATELY.
Call Harbor Freight Tools' at (800) 444-3353 or send an email to recalls@harborfreight.com Monday through Friday between 8:00 am and
4:30 pm PDT to learn how to replace the drill with a new model drill from Harbor Freight Tools.
Please note that the same model drill with a grey trigger switch is not subject to this recall.
In Cooperation with the U.S. Consumer Product Safety Commission
Unquote
Click on the link below:
http://images.harborfreight.com/hftweb/recalls/19.2VoltCordlessDrillRecall.pdf
John noted that he took three of them back to the local Harbor Freight store and at first they wanted to give him three 3/8" drills.
He pointed out that they were 1/2" chuck drill so they gave him three of these:
http://www.harborfreight.com/18-volt-cordless-12-drilldriver-with-keyless-chuck-68850.html
To save the Harbor Freight naysayers time writing emails I offer the following:
Harbor Freight sells crap; it is all crap, has always been crap and will always be crap. ;-)
Regards,
Rob M.
USAussie - Downunder
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Harbor Freight 19.2V Drill - Recall [message #195128 is a reply to message #195123] |
Tue, 08 January 2013 05:20 |
|
mike miller
Messages: 3576 Registered: February 2004 Location: Hillsboro, Oregon
Karma: 0
|
Senior Member |
|
|
Rob Mueller wrote on Mon, 07 January 2013 23:55 | G'day,
John Sharpe got a recall notice from Harbor Freight and asked me to pass it on to the GMCnet. ...
|
Interesting header on this message... at least on line
Rob Mueller
Messages: 2
Registered: August 2007
Junior Member
Did Rob's "odometer" just roll over?
(He DID have the highest message count on the forum!)
Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo'
http://m000035.blogspot.com
|
|
|
Re: [GMCnet] Harbor Freight 19.2V Drill - Recall [message #195153 is a reply to message #195123] |
Tue, 08 January 2013 08:22 |
Chr$
Messages: 2690 Registered: January 2004 Location: Scottsdale, AZ
Karma: 1
|
Senior Member |
|
|
Harbor freight sells tools that are good for that tool you will need only once in a while, or for large projects where you need basic tools for a bunch of temporary contractors who will lose or steal them anyway...
Their Larger Air Compressors are actually pretty reliable. I had one that ran for years on a daily basis. I think those are made in Mexico.
-Chr$: Perpetual SmartAss
Scottsdale, AZ
77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
|
|
|