GMCforum: GMCnet » Overhead console

Home » Public Forums » GMCnet » Overhead console

Show: Today's Messages :: Polls :: Message Navigator

Overhead console [message #189631]

Thu, 08 November 2012 13:11

tphipps

Messages: 3005
Registered: August 2004
Location: Spanish Fort, AL

Karma: 9

Senior Member

Reading the back discussions on installing an overhead console. I picked up one out of a Suburban today. Need a pointer to an eletrical pin out on the plugs. Also need to go back and get the sensor. Impulse grab, did not remember where the sensor was located.

Would be nice to have, but basically a frill.
Tom, MS II

2012 Phoenix Cruiser model 2552 KA4CSG

Report message to a moderator

Re: Overhead console [message #189637 is a reply to message #189631]

Thu, 08 November 2012 15:00

Keith V

Messages: 2337
Registered: March 2008
Location: Mounds View,MN

Karma: 0

Senior Member

This should help

The sensor is clipped to the center of the radiator bracket.
I think I have a picture

Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com

Report message to a moderator

Re: Overhead console [message #189638 is a reply to message #189637]

Thu, 08 November 2012 15:08

Keith V

Messages: 2337
Registered: March 2008
Location: Mounds View,MN

Karma: 0

Senior Member

Keith V wrote on Thu, 08 November 2012 15:00

This should help

The sensor is clipped to the center of the radiator bracket.
I think I have a picture

and a link would be nice!
http://www.gmcmhphotos.com/photos/g5210-overhead-console.html

Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com

Report message to a moderator

Re: [GMCnet] Overhead console [message #189677 is a reply to message #189638]

Thu, 08 November 2012 20:27

kelvin

Messages: 608
Registered: February 2004
Location: Eugene, OR

Karma: 0

Senior Member

On 11/8/2012 1:08 PM, Keith V wrote:
>
> Keith V wrote on Thu, 08 November 2012 15:00
>> This should help
>>
>> The sensor is clipped to the center of the radiator bracket.
>> I think I have a picture
> and a link would be nice!
> http://www.gmcmhphotos.com/photos/g5210-overhead-console.html

I used most of Keith's wiring for my install. Did a few things
different, of course.

http://www.gmcmhphotos.com/photos/g5596-96-blazer-overhead-console.html

Kelvin
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Previous Topic:	[GMCnet] OEM Air Bag Inlet Pipe Thread Size
Next Topic:	Head Liner and retroflix insulation

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Oct 08 14:20:56 CDT 2024

Total time taken to generate the page: 0.04948 seconds