[GMCnet] Painting the Onan carb... [message #189165] |
Sun, 04 November 2012 12:49 |
Robin Hood
Messages: 1078 Registered: April 2011
Karma: 3
|
Senior Member |
|
|
Quick question y'all. Can I use basic rattle can spray paint to paint the
Onan generator carburetor? I don't feel like going and buying the special
paint from Cummins just for the carb.
--
Robin Hood
Jackson, MS
2003 Buick Lesabre
1968 Pontiac Catalina
1978 GMC Royale motorhome
1977 GMC Palm Beach motorhome
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
|
|
Re: [GMCnet] Painting the Onan carb... [message #189173 is a reply to message #189165] |
Sun, 04 November 2012 13:49 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
As nearly as I can tell from having sprayed a lot of Onan Green from Onan, their stuff is typische rattle can lacquer, the only thing special besides the asking price (I beg it off the tech for free) is the shade of green.
--johnny
'76 23' transmode norris
'76 palm beach
From: Robin Hood <loxley@gmail.com>
To: "gmclist@temp.gmcnet.org" <gmclist@temp.gmcnet.org>
Sent: Sunday, November 4, 2012 1:49 PM
Subject: [GMCnet] Painting the Onan carb...
Quick question y'all. Can I use basic rattle can spray paint to paint the
Onan generator carburetor? I don't feel like going and buying the special
paint from Cummins just for the carb.
--
Robin Hood
Jackson, MS
2003 Buick Lesabre
1968 Pontiac Catalina
1978 GMC Royale motorhome
1977 GMC Palm Beach motorhome
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
Re: [GMCnet] Painting the Onan carb... [message #189182 is a reply to message #189172] |
Sun, 04 November 2012 14:49 |
|
USAussie
Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Dan,
I agree with you, the carb is pot metal (die cast zinc alloy) and IIRC when I had the carb off the Onan in Double Trouble it wasn't
painted at all, bowl included.
Regards,
Rob M.
USAussie - Downunder
-----Original Message-----
From: Dan Gregg
Well, I should have kept quiet. Thought someone would help you out here before now. Can't go out and look at mine right now. Most
carbs are made out of "pot metal" and wont rust. Now, the bowl might rust so shoot it with something.
Dan
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
|
Re: [GMCnet] Painting the Onan carb... [message #189191 is a reply to message #189183] |
Sun, 04 November 2012 16:13 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
On their big stuff, Onan is still in the habit of spraying Onan Green all over the thing, trusting on grease to keep the paint from sticking linkages ans things. The belts shed it quickly, it burns off the drive spool of the turbocharger and manifold, and flakes off other stuff like parts of the injector. Tghe little 1 cyl ones I have had paint on the carbs, but it didn't stick.
johnny
'76 23' tranmdmode norris
'76 palm beach
From: Ken Burton <n9cv@comcast.net>
To: gmclist@temp.gmcnet.org
Sent: Sunday, November 4, 2012 4:06 PM
Subject: Re: [GMCnet] Painting the Onan carb...
I have never seen a painted carb in my life. They are made out of pot metal which is either aluminum or zinc. We sometimes soda blast hem to make them pretty if that is what you are after.
http://en.wikipedia.org/wiki/Pot_metal
No iron or steel equals no rust.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
Re: [GMCnet] Painting the Onan carb... [message #189192 is a reply to message #189165] |
Sun, 04 November 2012 16:30 |
Hoosier
Messages: 20 Registered: May 2008 Location: Roxboro, NC
Karma: 0
|
Junior Member |
|
|
I needed the Onan green paint to finish the housing for my Onan.
Searched the forum and some one had posted a Ford Green paint was
so close to a match you could not tell the difference.
OReilly ordered it for me. DE1617 Ford Green in rattle cans.
Looks good.
RayBechtel
Roxboro, NC
1976 Royale
|
|
|
|
|
Re: [GMCnet] Painting the Onan carb... [message #189203 is a reply to message #189196] |
Sun, 04 November 2012 18:28 |
|
Matt Colie
Messages: 8547 Registered: March 2007 Location: S.E. Michigan
Karma: 7
|
Senior Member |
|
|
Robin Hood wrote on Sun, 04 November 2012 18:21 | Ah crap. Well it's been in there since Thursday night. We still aren't quite home yet.
|
Robin,
When you are home, pull the carburetor out of the wash and rinse it long and hard in clear water, then do a final rinse in HOT water so it dries quickly. Four days on the soak, it will still be alright. The paint will be gone.
Still want to paint it?
OK, but first put it all together and run the two jet adjusting screws all the way in (gently). The idle adjusting screw needs special care as it has thread sticking out both ways. If you put just a fine film of grease on the threads and not anywhere else, the paint won't stick there. Run that in until the spring just touches. Mask the inlet, outlet and the fuel barb or flare. Put a piece of wire through the hole in the throttle arm, make it long enough to get your fingers clear and it has to have a hook to hand from while drying.
Start out holding it by the throttle shaft, this will give you better control. When you are about done, change to the wire. Do not try to get good or full coverage on the first pass. Just dust it so you do get any runs or sags. When is just about tacky, do another pass.
Most of the time two passes is enough. And, yes, the zinc die casting alloys will corrode in a moist atmosphere (like a sailboat bilge). Can you guess who may have painted the carburetors he rebuilt for client's old boat engines?
Matt
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|