GMCforum: GMCnet » [GMCnet] Sender problems

Home » Public Forums » GMCnet » [GMCnet] Sender problems

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Sender problems [message #187837]

Sun, 21 October 2012 04:15

Mr ERFisher

Messages: 7117
Registered: August 2005

Karma: 2

Senior Member

Of the 6 senders, that I have "looked at", all
- have been ok (needed to be repaired)
- had to be removed to be repaired (solder the connection)
- did not need to be replaced
- none were leaking
- replaced gasket (JimK)

click here
http://goo.gl/ViUJM

SO
if your sender (in either tank) fails, you can
1 connect the drains and use the one remaining sender for both tanks (JimB
accessory)
http://goo.gl/gmNsI
2 cut a hole in the floor and just remove and repair the sender
http://goo.gl/FfvtG
3 drop the tanks (UGH) and
- repair the lines,
-senders,
-vents,
-etc

good luck
gene

--
Gene Fisher -- 74-23,77PB/ore/ca
�Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Previous Topic:	[GMCnet] Need email for bob drews
Next Topic:	[GMCnet] Loose wire on alternator connector

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Jan 11 23:31:37 CST 2025

Total time taken to generate the page: 0.01477 seconds