GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Distributor cap & rotor
[GMCnet] Distributor cap & rotor [message #186876] Wed, 10 October 2012 14:41 Go to next message
emerystora is currently offline  emerystora   United States
Messages: 4442
Registered: January 2004
Karma: 13
Senior Member
In his presentation at the GMCMI convention at Amana, Dick Paterson mentioned that when replacing the cap & rotor one should use one that has brass terminals on top and brass contacts inside the cap. Most auto parts store one have aluminum and the don't hold up well he said that if the don't have one in stock ask for a marine Chevrolet cap. They are brass

Same on rotors. Don't use one with an aluminum spark blade.


Emery Stora
77 Kingsley
Frederick, CO
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Distributor cap & rotor [message #186878 is a reply to message #186876] Wed, 10 October 2012 15:04 Go to previous messageGo to next message
WD0AFQ is currently offline  WD0AFQ   United States
Messages: 7111
Registered: November 2004
Location: Dexter, Mo.
Karma: 207
Senior Member
I remember that Emery. I need to go buy a spare cap. Will see hat I come up with.
Dan


3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer
Re: [GMCnet] Distributor cap & rotor [message #186881 is a reply to message #186876] Wed, 10 October 2012 15:23 Go to previous message
Gary Worobec is currently offline  Gary Worobec   United States
Messages: 867
Registered: May 2005
Karma: -1
Senior Member
Hi Emery,
I had a situation on the HEI distributor that I got from Dick where the
screws that hold the module in place had loosened up. (one was almost out).
I know that Dick tests these before they go out so not sure what the issue
was. I put them back in with some Loctite. Might be something to check if
folks have not already done so or if they notice any issues.

Thanks

Gary and Joanne Worobec
1973 GMC Glacier
Anza, CA

----- Original Message -----
From: "Emery Stora" <emerystora@mac.com>
To: <gmclist@temp.gmcnet.org>
Sent: Wednesday, October 10, 2012 12:41 PM
Subject: [GMCnet] Distributor cap & rotor


> In his presentation at the GMCMI convention at Amana, Dick Paterson
> mentioned that when replacing the cap & rotor one should use one that has
> brass terminals on top and brass contacts inside the cap. Most auto parts
> store one have aluminum and the don't hold up well he said that if the
> don't have one in stock ask for a marine Chevrolet cap. They are brass
>
> Same on rotors. Don't use one with an aluminum spark blade.
>
>
> Emery Stora
> 77 Kingsley
> Frederick, CO
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Previous Topic: Intake manifold leak
Next Topic: [GMCnet] New FMCA emergency medical evacuation program
Goto Forum:
  


Current Time: Tue Nov 19 05:03:40 CST 2024

Total time taken to generate the page: 0.01560 seconds