|
|
|
|
|
|
|
|
| Re: [GMCnet] Holding tank valve handle [message #186211 is a reply to message #186193] |
Tue, 02 October 2012 11:36   |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
Lemme see what's on my mostly disassembles SOB Itasca).
--johnny
'76 23' transmode norris
'76 palm beach
From: Matt Colie <matt7323tze@gmail.com>
To: gmclist@temp.gmcnet.org
Sent: Tuesday, October 2, 2012 10:49 AM
Subject: Re: [GMCnet] Holding tank valve handle
Sean wrote on Tue, 02 October 2012 10:27
> My coach is missing the holding tank valve handle pictured here:
> http://goo.gl/NFCyU
>
> The parts book shows it as #693762. Where can I get a replacement?
>
> Thanks,
> --
> Sean
Sean,
That handle was a Thetford part. So was the little spring keeper kit. I have no clue if it is still available. You might call Thetford and ask. If they are no help, then try Bob Stone(r) that has GMC Reclaimations stock.
Worst case (cost wise) you can try Cinnabar.
Matt
--
Matt & Mary Colie
'73 Glacier 23 Chaumière (say show-me-air) Just about as stock as you will find
SE Michigan - Twixt A2 and Detroit
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
|
|
|
|
|
|
|
|
| Re: [GMCnet] Holding tank valve handle [message #186527 is a reply to message #186216] |
Sat, 06 October 2012 10:15 |
Sean
Messages: 189
Registered: March 2012
Karma: 0
|
Senior Member |
|
|
On Tue, Oct 2, 2012 at 11:11 AM, Sean F <wsfulmer@gmail.com> wrote:
> On Tue, Oct 2, 2012 at 11:09 AM, Dennis Sexton <dennisfsexton@aol.com> wrote:
>> OOOOHHHH,
>> Look at this -- new Thetford handle on ebay...
>>
>> http://www.ebay.com/itm/Thetford-03795-Dump-Valve-Extension-Handle-Package-/271034257878
>
> Thanks! I regret to inform the rest of you that this item is no longer
> available :)
Installed the handle today - perfect fit!
http://goo.gl/YDsW6
http://goo.gl/pCNiV
http://goo.gl/DS93U
If you need one, it's Thetford 03795 - seems to be a common part.
Thanks again, Dennis!
--
Sean
1973 260 Painted Desert
Luna County, NM
Gallery: http://goo.gl/Gfcpd
GMCMH Search Engine: http://goo.gl/xd8PK
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
Sean
1973 260 Painted Desert
Luna County, NM
|
|
|
|
| Re: [GMCnet] Holding tank valve handle [message #186562 is a reply to message #186527] |
Sat, 06 October 2012 20:38 |
Dennis S
Messages: 3046
Registered: November 2005
Karma: 2
|
Senior Member |
|
|
| Sean wrote on Sat, 06 October 2012 10:15 |
On Tue, Oct 2, 2012 at 11:11 AM, Sean F <wsfulmer@gmail.com> wrote:
> On Tue, Oct 2, 2012 at 11:09 AM, Dennis Sexton <dennisfsexton@aol.com> wrote:
>> OOOOHHHH,
>> Look at this -- new Thetford handle on ebay...
>>
>> http://www.ebay.com/itm/Thetford-03795-Dump-Valve-Extension-Handle-Package-/271034257878
>
> Thanks! I regret to inform the rest of you that this item is no longer
> available 
Installed the handle today - perfect fit!
http://goo.gl/YDsW6
http://goo.gl/pCNiV
http://goo.gl/DS93U
If you need one, it's Thetford 03795 - seems to be a common part.
Thanks again, Dennis!
--
Sean
1973 260 Painted Desert
Luna County, NM
|
Sean,
You're welcome -- and thanks for letting us know how it worked out and for confirming the correct part number. I have not looked at the GMCMI parts exchange -- but this would be a good entry -- especially since there were a number of people in need.
Dennis
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
