Home » Public Forums » GMCnet » [GMCnet] Seals
[GMCnet] Seals [message #186002] |
Sun, 30 September 2012 15:01 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
S0o. We had a seal party at Ted Petty's place. George Zhukoff (sp?) joined us and ran the camera. Pics to my place on the photo site tonight. We sealed two A-6 compressors and used up some of Ted's beer in the process. Shared stories about flying and listyened to some of George's helicopter tales. Next stop on the Seal Kit World Tour is Dolph Santorini's place, they head his way tomorrow. Also needed are the clutch pully remove and replace tools, which George had. He said he'll post the maker and part numbers. There's room for them in a USPS SMALL FLat Rate box along with the seal tool kit. <hint> If there were a set in with the seal tools, when the World Tour is finished, Larry Davick would have a box with everything but the seal itself to kindly loan out to GMCers who have A/C problems. After Dolph, they head for Chicago, I think.
--johnny
'76 23' transmode norris
'76 palm beach
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
Re: [GMCnet] Seals [message #186058 is a reply to message #186002] |
Mon, 01 October 2012 09:27 |
|
ljdavick
Messages: 3548 Registered: March 2007 Location: Fremont, CA
Karma: -3
|
Senior Member |
|
|
Excellent!
Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, CA
On Sep 30, 2012, at 1:01 PM, Johnny Bridges wrote:
> S0o. We had a seal party at Ted Petty's place. George Zhukoff (sp?) joined us and ran the camera. Pics to my place on the photo site tonight. We sealed two A-6 compressors and used up some of Ted's beer in the process. Shared stories about flying and listyened to some of George's helicopter tales. Next stop on the Seal Kit World Tour is Dolph Santorini's place, they head his way tomorrow. Also needed are the clutch pully remove and replace tools, which George had. He said he'll post the maker and part numbers. There's room for them in a USPS SMALL FLat Rate box along with the seal tool kit. <hint> If there were a set in with the seal tools, when the World Tour is finished, Larry Davick would have a box with everything but the seal itself to kindly loan out to GMCers who have A/C problems. After Dolph, they head for Chicago, I think.
>
> --johnny
> '76 23' transmode norris
> '76 palm beach
> _______________________________________________
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy
|
|
|
Re: [GMCnet] Seals [message #186065 is a reply to message #186058] |
Mon, 01 October 2012 11:02 |
Mr ERFisher
Messages: 7117 Registered: August 2005
Karma: 2
|
Senior Member |
|
|
We need to document this process
Seal mums
Tools
Etc
Gene
FREE WIFI @ Mickey D
On Oct 1, 2012, at 7:27 AM, Larry Davick <ljdavick@comcast.net> wrote:
> Excellent!
>
> Larry Davick
> A Mystery Machine
> 1976(ish) Palm Beach
> Fremont, CA
>
> On Sep 30, 2012, at 1:01 PM, Johnny Bridges wrote:
>
>> S0o. We had a seal party at Ted Petty's place. George Zhukoff (sp?) joined us and ran the camera. Pics to my place on the photo site tonight. We sealed two A-6 compressors and used up some of Ted's beer in the process. Shared stories about flying and listyened to some of George's helicopter tales. Next stop on the Seal Kit World Tour is Dolph Santorini's place, they head his way tomorrow. Also needed are the clutch pully remove and replace tools, which George had. He said he'll post the maker and part numbers. There's room for them in a USPS SMALL FLat Rate box along with the seal tool kit. <hint> If there were a set in with the seal tools, when the World Tour is finished, Larry Davick would have a box with everything but the seal itself to kindly loan out to GMCers who have A/C problems. After Dolph, they head for Chicago, I think.
>>
>> --johnny
>> '76 23' transmode norris
>> '76 palm beach
>> _______________________________________________
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Seals [message #186078 is a reply to message #186065] |
Mon, 01 October 2012 12:50 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
I got the pics George took. I'll put them up soon as I have a spare moment.
--johnny
'76 23' transmode norris
'76 palm beach
From: "mr.erfisher@gmail.com" <mr.erfisher@gmail.com>
To: "gmclist@temp.gmcnet.org" <gmclist@temp.gmcnet.org>
Sent: Monday, October 1, 2012 12:02 PM
Subject: Re: [GMCnet] Seals
We need to document this process
Seal mums
Tools
Etc
Gene
FREE WIFI @ Mickey D
On Oct 1, 2012, at 7:27 AM, Larry Davick <ljdavick@comcast.net> wrote:
> Excellent!
>
> Larry Davick
> A Mystery Machine
> 1976(ish) Palm Beach
> Fremont, CA
>
> On Sep 30, 2012, at 1:01 PM, Johnny Bridges wrote:
>
>> S0o. We had a seal party at Ted Petty's place. George Zhukoff (sp?) joined us and ran the camera. Pics to my place on the photo site tonight. We sealed two A-6 compressors and used up some of Ted's beer in the process. Shared stories about flying and listyened to some of George's helicopter tales. Next stop on the Seal Kit World Tour is Dolph Santorini's place, they head his way tomorrow. Also needed are the clutch pully remove and replace tools, which George had. He said he'll post the maker and part numbers. There's room for them in a USPS SMALL FLat Rate box along with the seal tool kit. <hint> If there were a set in with the seal tools, when the World Tour is finished, Larry Davick would have a box with everything but the seal itself to kindly loan out to GMCers who have A/C problems. After Dolph, they head for Chicago, I think.
>>
>> --johnny
>> '76 23' transmode norris
>> '76 palm beach
>> _______________________________________________
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
Re: [GMCnet] Seals [message #186177 is a reply to message #186078] |
Tue, 02 October 2012 07:48 |
Dolph Santorine
Messages: 1236 Registered: April 2011 Location: Wheeling, WV
Karma: -41
|
Senior Member |
|
|
Since I'm prepping (and ordering seals), I found this:
http://www.autoacforum.com/messageview.cfm?catid=20&threadid=18683
Comments?
Dolph
On Oct 1, 2012, at 1:50 PM, Johnny Bridges <jhbridges@ymail.com> wrote:
> I got the pics George took. I'll put them up soon as I have a spare moment.
>
> --johnny
> '76 23' transmode norris
> '76 palm beach
>
>
> From: "mr.erfisher@gmail.com" <mr.erfisher@gmail.com>
> To: "gmclist@temp.gmcnet.org" <gmclist@temp.gmcnet.org>
> Sent: Monday, October 1, 2012 12:02 PM
> Subject: Re: [GMCnet] Seals
>
> We need to document this process
> Seal mums
> Tools
> Etc
>
> Gene
>
> FREE WIFI @ Mickey D
>
>
>
>
>
> On Oct 1, 2012, at 7:27 AM, Larry Davick <ljdavick@comcast.net> wrote:
>
>> Excellent!
>>
>> Larry Davick
>> A Mystery Machine
>> 1976(ish) Palm Beach
>> Fremont, CA
>>
>> On Sep 30, 2012, at 1:01 PM, Johnny Bridges wrote:
>>
>>> S0o. We had a seal party at Ted Petty's place. George Zhukoff (sp?) joined us and ran the camera. Pics to my place on the photo site tonight. We sealed two A-6 compressors and used up some of Ted's beer in the process. Shared stories about flying and listyened to some of George's helicopter tales. Next stop on the Seal Kit World Tour is Dolph Santorini's place, they head his way tomorrow. Also needed are the clutch pully remove and replace tools, which George had. He said he'll post the maker and part numbers. There's room for them in a USPS SMALL FLat Rate box along with the seal tool kit. <hint> If there were a set in with the seal tools, when the World Tour is finished, Larry Davick would have a box with everything but the seal itself to kindly loan out to GMCers who have A/C problems. After Dolph, they head for Chicago, I think.
>>>
>>> --johnny
>>> '76 23' transmode norris
>>> '76 palm beach
>>> _______________________________________________
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
Re: [GMCnet] Seals [message #186182 is a reply to message #186177] |
Tue, 02 October 2012 08:28 |
Mr ERFisher
Messages: 7117 Registered: August 2005
Karma: 2
|
Senior Member |
|
|
wow is that impressive
is this what you all are using?
gene
On Tue, Oct 2, 2012 at 5:48 AM, Dolph Santorine <dolph@dolphsantorine.com>wrote:
> Since I'm prepping (and ordering seals), I found this:
>
> http://www.autoacforum.com/messageview.cfm?catid=20&threadid=18683
>
> Comments?
>
> Dolph
>
>
>
> On Oct 1, 2012, at 1:50 PM, Johnny Bridges <jhbridges@ymail.com> wrote:
>
> > I got the pics George took. I'll put them up soon as I have a spare
> moment.
> >
> > --johnny
> > '76 23' transmode norris
> > '76 palm beach
> >
> >
> > From: "mr.erfisher@gmail.com" <mr.erfisher@gmail.com>
> > To: "gmclist@temp.gmcnet.org" <gmclist@temp.gmcnet.org>
> > Sent: Monday, October 1, 2012 12:02 PM
> > Subject: Re: [GMCnet] Seals
> >
> > We need to document this process
> > Seal mums
> > Tools
> > Etc
> >
> > Gene
> >
> > FREE WIFI @ Mickey D
> >
> >
> >
> >
> >
> > On Oct 1, 2012, at 7:27 AM, Larry Davick <ljdavick@comcast.net> wrote:
> >
> >> Excellent!
> >>
> >> Larry Davick
> >> A Mystery Machine
> >> 1976(ish) Palm Beach
> >> Fremont, CA
> >>
> >> On Sep 30, 2012, at 1:01 PM, Johnny Bridges wrote:
> >>
> >>> S0o. We had a seal party at Ted Petty's place. George Zhukoff (sp?)
> joined us and ran the camera. Pics to my place on the photo site tonight.
> We sealed two A-6 compressors and used up some of Ted's beer in the
> process. Shared stories about flying and listyened to some of George's
> helicopter tales. Next stop on the Seal Kit World Tour is Dolph
> Santorini's place, they head his way tomorrow. Also needed are the clutch
> pully remove and replace tools, which George had. He said he'll post the
> maker and part numbers. There's room for them in a USPS SMALL FLat Rate
> box along with the seal tool kit. <hint> If there were a set in with the
> seal tools, when the World Tour is finished, Larry Davick would have a box
> with everything but the seal itself to kindly loan out to GMCers who have
> A/C problems. After Dolph, they head for Chicago, I think.
> >>>
> >>> --johnny
> >>> '76 23' transmode norris
> >>> '76 palm beach
> >>> _______________________________________________
> >> _______________________________________________
> >> GMCnet mailing list
> >> Unsubscribe or Change List Options:
> >> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Seals [message #186183 is a reply to message #186181] |
Tue, 02 October 2012 08:34 |
Dennis S
Messages: 3046 Registered: November 2005
Karma: 2
|
Senior Member |
|
|
George Zhookoff wrote on Tue, 02 October 2012 08:27 | " I found this:
http://www.autoacforum.com/messageview.cfm?catid=20&threadid=18683
Comments?
Dolph"
Yes, that's a good photo trail of replacing the seal, but...
The picture that labels the 2 piece seal and new seal, you reinstall the metal cage under the ceramic seal. You discard only the ceramic seal.
The kit Johnny is sending on to you has all the required tools except spanner and clutch removal and installation tool.
The picture trail starts with the removing pulley and clutch. The spanner we used is an Air Pro Quality Parts Modine part # 00325.
The clutch plate remover & installer is a KD GM part # 2418. I think the KD is NOS from an ebay auction.
You can search the web and find all the additional individual tools for sale. Also there are kits containing every tool in one box.
There is also a utube video on replacing the seal.
The second compressor rebuid by Ted Petty that day took as long as it took for Johnny and me to down a beer.
George "who is gathering materials to overhaull my AC" Zhookoff
78 EL II
Atlanta
|
Here is my photo album for tools used to remove and replace the AC compressor clutch -- part numbers for loaner tools are Autozone.
http://www.gmcmhphotos.com/photos/g5593-gmc-ac-compressor-tools.html
Dennis
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|
|
Goto Forum:
Current Time: Mon Sep 30 05:32:43 CDT 2024
Total time taken to generate the page: 0.01251 seconds
|