[GMCnet] Timing question [message #184579] |
Sat, 15 September 2012 09:26 |
glwgmc
Messages: 1014 Registered: June 2004
Karma: 10
|
Senior Member |
|
|
Hi Ken,
You are more than welcome to use the slide presentation I gave at GMCWS at Casa de Fruta this spring. It might help people understand the concepts of what is going on and why even the most professional of alignment shops struggle to do it right on a GMC.
Jerry
Jerry Work
Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR
glwork@mac.com
http://jerrywork.com
541-592-5360
-------------------
Message: 16
Date: Fri, 14 Sep 2012 23:22:33 -0400
From: Ken Henderson <hend4800@bellsouth.net>
Subject: Re: [GMCnet] Timing question
To: gmclist@temp.gmcnet.org
Message-ID:
<CANsh1i1s7chg7dQfQFvcsuY6nedBf18QCDKq8KCLpim7-oxCmQ@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
John,
If you do bring your Jerry Work alignment rig to Amana, I'd like to show it
at the seminar I'm supposed to give. Well, I'd rather not call it a
"seminar"... you'll notice the title says, "Discussion...". WE're going to
talk about alignment -- there will inevitably be a lot of people in the
audience who know more about alignment than I do who will hopefully share
that knowledge so we all learn something.
I'll be showing my simple jigs and I'd like for everyone to see Jerry's
also; my simple handout will consist mostly of useful URL's, including
Jerry's site.
We should be able to drum up a work session/demo using your coach & tools.
Ken H.
----------------------
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jerry & Sharon Work
78 Royale
Kerby, OR
|
|
|
Re: [GMCnet] Timing question [message #184620 is a reply to message #184579] |
Sat, 15 September 2012 17:57 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Jerry,
I appreciate that very much. I do intend to have it on my computer and may
refer to it now that I have your permission, but I don't plan a straight
slide show. I've had a couple of these "Discussions", where I discourse
briefly on the theories, and the necessity for everything to be "right",
then describe how alignment can be done. All the while, I invite comments
from the audience so that those with far more experience than I can state
their preferences when there are alternate methods, etc. It's been very
well received in the past, we'll see how it works out with this much larger
audience -- "crowd control" may be a problem, but I think I can handle
that. I'll try to be sure the essential points of your presentation are
covered.
Your web site definitely be listed on the handout, and if someone, as
expected, brings a set of your equipment, I'll show it.
Thanks for your efforts, and offer.
Ken
On Sat, Sep 15, 2012 at 10:26 AM, Work Jerry wrote:
> Hi Ken,
>
> You are more than welcome to use the slide presentation I gave at GMCWS at
> Casa de Fruta this spring. It might help people understand the concepts of
> what is going on and why even the most professional of alignment shops
> struggle to do it right on a GMC.
>
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|