Thrust Bearing Failure [message #183796] |
Sun, 09 September 2012 19:32 |
g.winger
Messages: 792 Registered: February 2008 Location: Warrenton,Missouri
Karma: 0
|
Senior Member |
|
|
Wish I had thought of this before I put the Caddy together. In the latest issue of Engine Masters (magazine by popular hot rodding)is an article on direct thrust bearing oiling. Titled "Pressure Feed" page76. They modify the thrust bearing and block to oil the thrust face directly from the oil feed to the bearing by drilling horizotally into the oil passage. Looks pretty cool. Don't know if its online. Maybe enginemasters.com ,,,,,,,,PL
|
|
|
Re: [GMCnet] Thrust Bearing Failure [message #183799 is a reply to message #183796] |
Sun, 09 September 2012 20:16 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
NOW you tell me! :-)
Ken H.
On Sun, Sep 9, 2012 at 8:32 PM, Paul Leavitt wrote:
>
>
> Wish I had thought of this before I put the Caddy together. In the latest
> issue of Engine Masters (magazine by popular hot rodding)is an article on
> direct thrust bearing oiling. Titled "Pressure Feed" page76. They modify
> the thrust bearing and block to oil the thrust face directly from the oil
> feed to the bearing by drilling horizotally into the oil passage. Looks
> pretty cool. Don't know if its online. Maybe enginemasters.com ,,,,,,,,PL
>
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|