GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] VINYL STICK ON TILE
[GMCnet] VINYL STICK ON TILE [message #183437] Thu, 06 September 2012 20:30 Go to next message
larry erd is currently offline  larry erd   United States
Messages: 132
Registered: August 2010
Karma: 0
Senior Member
I wouldn't use any self stick flooring, but I am considering using
ALURE vinyl planks with self locking edges like Prego Laminate.
Don't use Alure's self stick which is cheaper. You get what you pay for.
Home Depot sells it for $2.98 sq.ft in cherry or oak, It's easy and water
proof.
Larry Erd
77 Kingsley
Lake Wales, Fl.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] VINYL STICK ON TILE [message #183468 is a reply to message #183437] Thu, 06 September 2012 23:37 Go to previous message
GMCNUSA is currently offline  GMCNUSA   United States
Messages: 283
Registered: August 2006
Location: Indianapolis, IN
Karma: 0
Senior Member
larry erd wrote on Thu, 06 September 2012 21:30

I wouldn't use any self stick flooring, but I am considering using
ALURE vinyl planks with self locking edges like Prego Laminate.
Don't use Alure's self stick which is cheaper. You get what you pay for.
Home Depot sells it for $2.98 sq.ft in cherry or oak, It's easy and water
proof.
Larry Erd
77 Kingsley
Lake Wales, Fl.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



I have looked at that sticky edge tile and it looks good. There is also a heavy vinyl tile planks at Home Depot that interlock like the pergo planks have not used either but would in the right place.


Larry Dilk
Indianapolis, IN
76 Eleganza II
Patterson 455,Turbo City TBI, Just LOVE It!
Previous Topic: Sullybilt operating pressure
Next Topic: [GMCnet] Join GMCMI for technical information and FUN!
Goto Forum:
  


Current Time: Fri Oct 04 15:31:16 CDT 2024

Total time taken to generate the page: 0.00568 seconds