GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Cool picture
Cool picture [message #180740] Sat, 18 August 2012 15:17 Go to next message
biggreen is currently offline  biggreen   United States
Messages: 347
Registered: June 2011
Location: Northeast Florida
Karma: 1
Senior Member
Finally got around to loading photos on the picture site.
Thought you might like this one.

http://www.gmcmhphotos.com/photos/member-galleries/p45303-our-ancestry.html

Report message to a moderator

Re: Cool picture [message #180741 is a reply to message #180740] Sat, 18 August 2012 15:28 Go to previous messageGo to next message
Dennis S is currently offline  Dennis S   United States
Messages: 3046
Registered: November 2005
Karma: 2
Senior Member
biggreen wrote on Sat, 18 August 2012 15:17

Finally got around to loading photos on the picture site.
Thought you might like this one.

http://www.gmcmhphotos.com/photos/member-galleries/p45303-our-ancestry.html


Roger,

Coach is really looking great....Thanks for sharing the photos.
Tell me more about those inserts from heavy sheet metal -- do you have a photo of one installed? I presume they are front and rear wheel well compartment "flaps".

Dennis

Dennis S
73 Painted Desert 230
Memphis TN Metro

Report message to a moderator

Re: Cool picture [message #180744 is a reply to message #180741] Sat, 18 August 2012 16:46 Go to previous messageGo to next message
biggreen is currently offline  biggreen   United States
Messages: 347
Registered: June 2011
Location: Northeast Florida
Karma: 1
Senior Member
Here's one installed over the heater hoses. Wanted to protect them better, then decided to do all 4.
The metal I had was a thicker gauge sheet metal, but I don't know the exact gauge, thicker than a car fender, maybe as thick as a toolbox. Thick enough you can't bend by hand.
Bent over the top edge then scribed them to the contour. Made 2 then used the mirror image to make the other side.
Slid the bent upper edge in above the plywood and screwed it in.

http://www.gmcmhphotos.com/photos/member-galleries/p45282-installed.html


I have pictures of the finished job will post soon.

Thanks

[Updated on: Sat, 18 August 2012 16:47]

Report message to a moderator

Re: Cool picture [message #180754 is a reply to message #180744] Sat, 18 August 2012 19:58 Go to previous messageGo to next message
roy1 is currently offline  roy1   United States
Messages: 2126
Registered: July 2004
Location: Minden nevada
Karma: 6
Senior Member
It's been quite a while since I painted mine so I can appreciate the big job you have tackled. That green primer looks like Dupont Vera prime that I put under the Imeron. Do they still sell it and did you use Imeron ?

Roy Keen Minden,NV 76 X Glenbrook

Report message to a moderator

Re: Cool picture [message #180763 is a reply to message #180754] Sat, 18 August 2012 21:08 Go to previous message
biggreen is currently offline  biggreen   United States
Messages: 347
Registered: June 2011
Location: Northeast Florida
Karma: 1
Senior Member
The roof was done in a single stage urethane like Imron.
The rest is base coat/clear coat.
Took from mid Feb. to Memorial Day.

Report message to a moderator

Previous Topic: HELP on injector O-ring
Next Topic: TH425 in autocross car, posi differential and long extended bell housing
Goto Forum:
  


Current Time: Mon Oct 07 18:27:58 CDT 2024

Total time taken to generate the page: 0.01528 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software