| Going Back in [message #180244] |
Tue, 14 August 2012 15:59  |
PettyVTX
Messages: 363
Registered: April 2011
Location: Winder Ga.
Karma: 1
|
Senior Member |
|
|
Sorry i didnt mean to hijack Dolphs thread.
Ken I am just putting finishing touches on the frame and hoses routing. The motor runs like a new one. I have the exhaust out right now and it looks like some new parts are going to be needed. I have headers and magna Flows but will have to replace a lot from there back. I still am working on my Air bags. Im building my own brackets. Since i have use of a laser water jet cutter im laying everything out flat with a insert tab A into Tab B system and then just weld. Just trying different things since the cuts are so precise.
Ex Avion now looking for a 23'
Jeep Wrangler Towd
|
|
|
|
| Re: [GMCnet] Going Back in [message #180259 is a reply to message #180244] |
Tue, 14 August 2012 16:51  |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Ted,
I'm just afraid of missing something! :-)
I'll be leaving about 17 Sep for GMCES & GMCMI Amana, then on to GMCDL
Colquitt almost immediately after our return. That only leaves about 3
weeks for me to make it over there to "help". Do you have anywhere for me
to park the GMC? It needs some more running-in before Amana.
Ken H.
On Tue, Aug 14, 2012 at 4:59 PM, Ted Petty wrote:
>
>
> Sorry i didnt mean to hijack Dolphs thread.
> Ken I am just putting finishing touches on the frame and hoses routing.
> The motor runs like a new one. I have the exhaust out right now and it
> looks like some new parts are going to be needed. I have headers and magna
> Flows but will have to replace a lot from there back. I still am working on
> my Air bags. Im building my own brackets. Since i have use of a laser water
> jet cutter im laying everything out flat with a insert tab A into Tab B
> system and then just weld. Just trying different things since the cuts are
> so precise.
> --
> 75 Avion-----
>
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: Going Back in [message #180274 is a reply to message #180244] |
Tue, 14 August 2012 18:10 |
PettyVTX
Messages: 363
Registered: April 2011
Location: Winder Ga.
Karma: 1
|
Senior Member |
|
|
Ken I sure do I have 14 acres water hookup and power even a dump station. Only no pavement to work on. I was planning on going back in with the frame sometime this week after a little more run time to make sure of no leaks and weird noises. If I can get it back in this week or next I could really use your input on alignment. Barbara and i had already talked about a first run on the engine down your way to see the prison and bring back your parts and tow bar.
Ex Avion now looking for a 23'
Jeep Wrangler Towd
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
