| [GMCnet] Tranny dip stick for th425 [message #175369] |
Mon, 02 July 2012 21:01  |
cfield@ix.netcom.com
Messages: 22
Registered: February 2004
Location: Bainbridge Is. WA
Karma: 0
|
Junior Member |
|
|
I took the guy out for a drive today and then went to check the tranny fluid level. When I pulled on the dip stick, the finger pull broke off so I need to find a new one to replace this old one or maybe I can JB weld it to work. Any recommendations?
Thanks
Chuck Field
Bainbridge Is., WA
77 Royale
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Tranny dip stick for th425 [message #175370 is a reply to message #175369] |
Mon, 02 July 2012 21:07  |
Dennis S
Messages: 3046
Registered: November 2005
Karma: 2
|
Senior Member |
|
|
| cfield@ix.netcom.com wrote on Mon, 02 July 2012 21:01 |
I took the guy out for a drive today and then went to check the tranny fluid level. When I pulled on the dip stick, the finger pull broke off so I need to find a new one to replace this old one or maybe I can JB weld it to work. Any recommendations?
Thanks
Chuck Field
Bainbridge Is., WA
77 Royale
_______________________________________________
|
Chuck,
Apparently a common event -- I got mine from JimK. The old one can be brazed.
Dennis
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|
|
| Re: [GMCnet] Tranny dip stick for th425 [message #175396 is a reply to message #175369] |
Tue, 03 July 2012 07:16 |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
Mine's the same, but it broke above the cup about half an inch. ViceGrips<tm> work great.
--johnny
'76 23' transmode norris
'76 palm beach
From: "cfield@ix.netcom.com" <cfield@ix.netcom.com>
To: gmclist@temp.gmcnet.org
Sent: Monday, July 2, 2012 10:01 PM
Subject: [GMCnet] Tranny dip stick for th425
I took the guy out for a drive today and then went to check the tranny fluid level. When I pulled on the dip stick, the finger pull broke off so I need to find a new one to replace this old one or maybe I can JB weld it to work. Any recommendations?
Thanks
Chuck Field
Bainbridge Is., WA
77 Royale
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
| Re: [GMCnet] Tranny dip stick for th425 [message #175407 is a reply to message #175369] |
Tue, 03 July 2012 09:58 |
Larry
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma: 10
|
Senior Member |
|
|
| cfield@ix.netcom.com wrote on Mon, 02 July 2012 21:01 |
I took the guy out for a drive today and then went to check the tranny fluid level. When I pulled on the dip stick, the finger pull broke off so I need to find a new one to replace this old one or maybe I can JB weld it to work. Any recommendations?
Thanks
Chuck Field
Bainbridge Is., WA
77 Royale
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
I have and extra or two....somewhere... if you want one. Also I'd bet that Manny has plenty of them.
Larry 
78 Royale w/500 Caddy
Menomonie, WI.
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
