GMCforum: GMCnet » Re: [GMCnet] Macerator question

Home » Public Forums » GMCnet » Re: [GMCnet] Macerator question

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Macerator question [message #174842]

Wed, 27 June 2012 23:13

rallymaster

Messages: 662
Registered: February 2004
Location: North Plains, ORYGUN

Karma: -4

Senior Member

That's a male camlock quick-connect fitting. measure the inside diameter
of the hole, and check at irrigation or farm stores for a female
connector for that size. They come with a barb fitting that goes into a
(usually) vinyl hose.
Mine are all black, they come in metal or plastic.
http://utahbiodieselsupply.com/quickconnects.php
is one source. You can search camlock quick connect and probably find
lots more.
RonC

On Wed, 27 Jun 2012 18:34:00 -0500 Bryan Hayes <hayesnet1@gmail.com>
writes:
>
>
> One of my coach's POs installed a macerator pump, but I'm not sure
> how to connect a hose up to it. Here's a picture of the connection.
>
>
>
http://www.gmcmhphotos.com/photos/member-galleries/p44415-macerator-hose.
html
>
> Is something missing?
> --
> Bryan Hayes
> '76 Eleganza II
> Salt Lake City, Utah
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

Ron & Linda Clark
1978 Eleganza II
North Plains, ORYGUN
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Ron & Linda Clark
North Plains, ORYGUN
78 Eleganza II

Report message to a moderator

Re: [GMCnet] Macerator question [message #336392 is a reply to message #174842]

Sun, 26 August 2018 13:03

shydamsel

Messages: 9
Registered: June 2013
Location: Northern California

Karma: 0

Junior Member

Thank you to who ever posted this information on the quick connects. Very Happy

Really just the info I was looking for.

Shydamsel shydamsel2@yahoo.com Northern California 1973 26' with 455

Report message to a moderator

Re: [GMCnet] Macerator question [message #336404 is a reply to message #336392]

Mon, 27 August 2018 00:54

powwerjon

Messages: 849
Registered: March 2013

Karma: -2

Senior Member

Carla,
I have used the quick disconnects for better than 15 years. Here is a series of pictures on how I did it on our coach.

http://www.gmcmhphotos.com/photos/g5371-maserator.html

I use 1” hoses, I have 1 %foot and 2 10foot hoses that can be connected together if the poop pipe is further away.

I use to get the fittings from Northern Tool and Equipment, but they no long have them available. They are use a lot in the Ag field and stores like Farm & Fleet, Tractor Supply.

J.R. Wright
GMC Great Laker MHC
GMCGL Tech Editor
GMC Eastern States Charter Member
GMCMI
78 GMC Buskirk 30’ Stretch
75 GMC Avion (Under Reconstruction)
Michigan

> On Aug 26, 2018, at 2:03 PM, Carla wrote:
>
> Thank you to who ever posted this information on the quick connects. :d Really just the info I was looking for.
> --
> Shydamsel
> shydamsel2@yahoo.com
> Northern California
> 1973 26' with 455
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Previous Topic:	correct oil pump and screen
Next Topic:	[GMCnet] 1977 Birchaven - 23 foot side bath in California for sale

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Sep 30 05:28:26 CDT 2024

Total time taken to generate the page: 0.01294 seconds