Home » Public Forums » GMCnet » [GMCnet] Rear wheel wells
[GMCnet] Rear wheel wells [message #167200] |
Sun, 22 April 2012 17:19 |
Dolph Santorine
Messages: 1236 Registered: April 2011 Location: Wheeling, WV
Karma: -41
|
Senior Member |
|
|
Since the bogies are out, I am considering spraying "rhino lining" in the wheel wells.
Thoughts?
The frame on the running coach is in excellent shape. The assembly of the parts coach was a disaster. Grade 3 fasteners on the brake system. Thank you PO
Dolph Santorine
Dolph@DolphSantorine.com
Phone: 304-219-3100
Cell: 740-312-5342
Http://www.DolphSantorine.com
Excuse me for not being my usual wordy and sporadically verbose self. This message is sent from my iPad, which is, in many ways, an iPhone on steroids.
No trees were killed in the sending of this message. Few long dead dinosaurs were involved. A large number of electrons were terribly inconvenienced.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Rear wheel wells [message #167205 is a reply to message #167200] |
Sun, 22 April 2012 18:53 |
Dennis S
Messages: 3046 Registered: November 2005
Karma: 2
|
Senior Member |
|
|
Dolph,
I intend to use Rhino on my wheel well liners -- BUT mine have a number of breaks, I plan to do the repairs in situ, and my coach is a 73 and has the black plastic? liners -- not the fiberglass liners used in later coaches.
Dennis
Dolph Santorine wrote on Sun, 22 April 2012 17:19 | Since the bogies are out, I am considering spraying "rhino lining" in the wheel wells.
Thoughts?
The frame on the running coach is in excellent shape. The assembly of the parts coach was a disaster. Grade 3 fasteners on the brake system. Thank you PO
Dolph Santorine
Dolph@DolphSantorine.com
Phone: 304-219-3100
Cell: 740-312-5342
Http://www.DolphSantorine.com
Excuse me for not being my usual wordy and sporadically verbose self. This message is sent from my iPad, which is, in many ways, an iPhone on steroids.
No trees were killed in the sending of this message. Few long dead dinosaurs were involved. A large number of electrons were terribly inconvenienced.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|
|
Re: [GMCnet] Rear wheel wells [message #167208 is a reply to message #167206] |
Sun, 22 April 2012 19:24 |
sgltrac
Messages: 2797 Registered: April 2011
Karma: 1
|
Senior Member |
|
|
The raptor liner is hard to beat in price quality and ease of use. Scrape loose stuff off , sand with 80 grit da and hose it on. One kit enough to do four wheel wells. Catalyzed so won't get on you later
Jwid
Sully
77 royale
Sent from my iPhone
On Apr 22, 2012, at 5:04 PM, Dennis Sexton <dennisfsexton@aol.com> wrote:
>
>
> Dolph,
>
> Photo of Sully's wheel well after Raptor bed liner application...
>
> http://gmc.mybirdfeeder.net/GMCforum/index.php?t=msg&goto=156581&rid=904&srch=sullybilt+air+spring#msg_156581
>
> Dennis
>
>
> Dolph Santorine wrote on Sun, 22 April 2012 17:19
>> Since the bogies are out, I am considering spraying "rhino lining" in the wheel wells.
>>
>> Thoughts?
>>
>> The frame on the running coach is in excellent shape. The assembly of the parts coach was a disaster. Grade 3 fasteners on the brake system. Thank you PO
>>
>>
>> Dolph Santorine
>>
>> Dolph@DolphSantorine.com
>>
>> Phone: 304-219-3100
>> Cell: 740-312-5342
>>
>> Http://www.DolphSantorine.com
>>
>> Excuse me for not being my usual wordy and sporadically verbose self. This message is sent from my iPad, which is, in many ways, an iPhone on steroids.
>>
>> No trees were killed in the sending of this message. Few long dead dinosaurs were involved. A large number of electrons were terribly inconvenienced.
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
> --
> Dennis S
> 73 Painted Desert 230
> Germantown, TN
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Sully
77 Royale basket case.
Future motorhome land speed record holder(bucket list)
Seattle, Wa.
|
|
|
Re: [GMCnet] Rear wheel wells [message #167212 is a reply to message #167200] |
Sun, 22 April 2012 19:38 |
rssbob
Messages: 259 Registered: January 2004 Location: La Mesa, Ca. (San Diego a...
Karma: 0
|
Senior Member |
|
|
I was going to do something easier. Power spray the liners, let them dry then paint them flat black with SEM vinyl dye. I wlso want to paint all the visible boggie parts black enamel because I powder coated my steel wheels black and I kind of like the look. Even going to leave off the lone T skirt I have. (Other one was missing).
On Apr 22, 2012, at 3:19 PM, Dolph Santorine wrote:
> Since the bogies are out, I am considering spraying "rhino lining" in the wheel wells.
>
> Thoughts?
>
> The frame on the running coach is in excellent shape. The assembly of the parts coach was a disaster. Grade 3 fasteners on the brake system. Thank you PO
>
>
> Dolph Santorine
>
> Dolph@DolphSantorine.com
>
> Phone: 304-219-3100
> Cell: 740-312-5342
>
> Http://www.DolphSantorine.com
>
> Excuse me for not being my usual wordy and sporadically verbose self. This message is sent from my iPad, which is, in many ways, an iPhone on steroids.
>
> No trees were killed in the sending of this message. Few long dead dinosaurs were involved. A large number of electrons were terribly inconvenienced.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
I was going to do something easier. Power spray the liners, let them dry then paint them flat black with SEM vinyl dye. I wlso want to paint all the visible boggie parts black enamel because I powder coated my steel wheels black and I kind of like the look. Even going to leave off the lone T skirt I have. (Other one was missing). Gives it sort of a hot rod look, so it goes with Jim Bounds saying of "12,000 pound hot rod with plumbing". Hey Jim, you ought to copy rite that one.
Bob Sobrito
1978 Palm Beach
La Mesa, Ca
antique pocket watch repair
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Bob Sobrito
78 Palm Beach
La Mesa, Ca
|
|
|
|
Re: [GMCnet] Rear wheel wells [message #167215 is a reply to message #167208] |
Sun, 22 April 2012 19:54 |
Dolph Santorine
Messages: 1236 Registered: April 2011 Location: Wheeling, WV
Karma: -41
|
Senior Member |
|
|
Raptor gets rave reviews. Did it quiet things down?
Dolph Santorine
Dolph@DolphSantorine.com
Phone: 304-219-3100
Cell: 740-312-5342
Http://www.DolphSantorine.com
Excuse me for not being my usual wordy and sporadically verbose self. This message is sent from my iPad, which is, in many ways, an iPhone on steroids.
No trees were killed in the sending of this message. Few long dead dinosaurs were involved. A large number of electrons were terribly inconvenienced.
On Apr 22, 2012, at 8:24 PM, Todd Sullivan <sgltrac@gmail.com> wrote:
> The raptor liner is hard to beat in price quality and ease of use. Scrape loose stuff off , sand with 80 grit da and hose it on. One kit enough to do four wheel wells. Catalyzed so won't get on you later
>
> Jwid
>
> Sully
> 77 royale
>
> Sent from my iPhone
>
> On Apr 22, 2012, at 5:04 PM, Dennis Sexton <dennisfsexton@aol.com> wrote:
>
>>
>>
>> Dolph,
>>
>> Photo of Sully's wheel well after Raptor bed liner application...
>>
>> http://gmc.mybirdfeeder.net/GMCforum/index.php?t=msg&goto=156581&rid=904&srch=sullybilt+air+spring#msg_156581
>>
>> Dennis
>>
>>
>> Dolph Santorine wrote on Sun, 22 April 2012 17:19
>>> Since the bogies are out, I am considering spraying "rhino lining" in the wheel wells.
>>>
>>> Thoughts?
>>>
>>> The frame on the running coach is in excellent shape. The assembly of the parts coach was a disaster. Grade 3 fasteners on the brake system. Thank you PO
>>>
>>>
>>> Dolph Santorine
>>>
>>> Dolph@DolphSantorine.com
>>>
>>> Phone: 304-219-3100
>>> Cell: 740-312-5342
>>>
>>> Http://www.DolphSantorine.com
>>>
>>> Excuse me for not being my usual wordy and sporadically verbose self. This message is sent from my iPad, which is, in many ways, an iPhone on steroids.
>>>
>>> No trees were killed in the sending of this message. Few long dead dinosaurs were involved. A large number of electrons were terribly inconvenienced.
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>>
>> --
>> Dennis S
>> 73 Painted Desert 230
>> Germantown, TN
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Rear wheel wells [message #167216 is a reply to message #167200] |
Sun, 22 April 2012 20:00 |
powerjon
Messages: 2446 Registered: January 2004
Karma: 5
|
Senior Member |
|
|
Should work just great!
JR Wright
GMC Great Laker MHC
GMC Eastern States
GMCMHI
78 Buskirk 30' Stretch
1975 Avion (Under Reconstruction)
Michigan
On Apr 22, 2012, at 6:19 PM, Dolph Santorine wrote:
> Since the bogies are out, I am considering spraying "rhino lining"
> in the wheel wells.
>
> Thoughts?
>
> The frame on the running coach is in excellent shape. The assembly
> of the parts coach was a disaster. Grade 3 fasteners on the brake
> system. Thank you PO
>
>
> Dolph Santorine
>
> Dolph@DolphSantorine.com
>
> Phone: 304-219-3100
> Cell: 740-312-5342
>
> Http://www.DolphSantorine.com
>
> Excuse me for not being my usual wordy and sporadically verbose
> self. This message is sent from my iPad, which is, in many ways, an
> iPhone on steroids.
>
> No trees were killed in the sending of this message. Few long dead
> dinosaurs were involved. A large number of electrons were terribly
> inconvenienced.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
J.R. Wright
GMC GreatLaker
GMC Eastern States
GMCMI
78 30' Buskirk Stretch
75 Avion Under Reconstruction
Michigan
|
|
|
|
Re: [GMCnet] Rear wheel wells [message #167244 is a reply to message #167225] |
Mon, 23 April 2012 00:58 |
sgltrac
Messages: 2797 Registered: April 2011
Karma: 1
|
Senior Member |
|
|
Carl, since the product is catalyzed it cures to a state where it becomes resistant to chemical attack and is more stable than air dry undercoatings many of which are asphalt based. Air dry undercoatings are great because they are Inexpensive and will cling to where they are applied even if the surface is poorly prepared but since they remain gooey forever, end up on your body when you re visit the location later.
Rob, I found it at tp tools with a google search. If someone wants to run out and buy it as opposed to mail order any auto body supply store should carry it. I bought mine from Wesmar as they are cheaper than my paint jobber.
Sully
77 royale
Sent from my iPhone
On Apr 22, 2012, at 6:26 PM, "Rob Mueller" <robmueller@iinet.net.au> wrote:
> Todd,
>
> Shore is purdy too!
>
> If you get a chance could you send us a link to where we can get it?
>
> Regards,
> Rob M.
>
> -----Original Message-----
> From: Todd Sullivan
>
>
> The raptor liner is hard to beat in price quality and ease of use. Scrape
> loose stuff off , sand with 80 grit da and hose it on. One kit enough to do
> four wheel wells. Catalyzed so won't get on you later
>
> Jwid
>
> Sully
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Sully
77 Royale basket case.
Future motorhome land speed record holder(bucket list)
Seattle, Wa.
|
|
|
|
|
Re: [GMCnet] Rear wheel wells [message #167281 is a reply to message #167200] |
Mon, 23 April 2012 12:55 |
Larry C
Messages: 1168 Registered: July 2004 Location: NE Illinois by the Illino...
Karma: 0
|
Senior Member |
|
|
I am considering spraying "rhino lining" in the wheel wells.
Thoughts?
I saw some testing of truck liner used as a protective barrior
They had a brick wall, 10 feet away they had explosives.... the detonation left the wall broken, part fell down.
They had a second brick wall, coated with truck liner...
Same amount of explosive, wall did not move, they claim the wall might have cracks in it but it was so sturdy, they climbed on top of it.
Another test was to coat the truck bed with truck liner, sprayed on... One truck had none... they blew up the trucks, the truck with no liner disintegrated. The truck with the liner sprayed on still had an intact truck bed.
This may be a good protection if the tire flys apart, may be able to afford some protection to the body panel as well????
The government started spraying HUMVIES for added protection in IRAQ... There were no testimonials on that but would be great reading if it works as well as the wall/truck test.
Gatsbys' CRUISER 08-18-04
74 GLACIER X, 260/455-APC-4 Bagg'r
Remflex Manifold gaskets
CampGrounds needed, Add yours to "PLACES" />
http://www.gmceast.com/travel
_
|
|
|
Re: [GMCnet] Rear wheel wells [message #167436 is a reply to message #167200] |
Tue, 24 April 2012 13:52 |
noi
Messages: 293 Registered: October 2010 Location: South of Fremont
Karma: 0
|
Senior Member |
|
|
Sully,
Thanks for the feed back – It has been a very LONG time since I used spray on undercoating and have forgotten what it was like after it “dried”.
I was thinking of using Rustoleum Truck Bed Liner paint for my wheel wells – Cheap, easy to find, and as it is for truck beds…. Should dry “clean”.
Carl P.
76 Birchaven
South of Fremont
|
|
|
Goto Forum:
Current Time: Mon Sep 30 02:29:48 CDT 2024
Total time taken to generate the page: 0.00955 seconds
|