GMCforum: GMCnet » [GMCnet] macerator valve

Home » Public Forums » GMCnet » [GMCnet] macerator valve

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] macerator valve [message #159128]

Fri, 03 February 2012 15:36

Brian Waddell

Messages: 409
Registered: March 2010

Karma: -4

Senior Member

I got my new macerator kit from one of the jim b.....I,was planning to install it this weekend,using the gmc coop members section as a guide but.....the site is not accepting my user code or passwordThere is no one at the coop thurs fri sat sun. I have looked at Jim k's site applied......this site does not show if I should take the old valve off completely or leave the inside part that is attached to the black tank....or WHAT......can anyone help....thanks...brian 77ele455

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] macerator valve [message #159129 is a reply to message #159128]

Fri, 03 February 2012 15:43

Dennis S

Messages: 3046
Registered: November 2005

Karma: 2

Senior Member

Brian,

I don't know the kit -- but here is what I did..

http://www.gmcmhphotos.com/photos/showgallery.php?cat=5767

and there is this...with several links.

http://gmcmotorhome.info/list.html#macerator

Dennis

Brian Waddell wrote on Fri, 03 February 2012 15:36

Dennis S
73 Painted Desert 230
Memphis TN Metro

Report message to a moderator

Re: [GMCnet] macerator valve [message #159131 is a reply to message #159129]

Fri, 03 February 2012 15:45

Dennis S

Messages: 3046
Registered: November 2005

Karma: 2

Senior Member

And this ...from Jim K site

http://appliedgmc.com/images/macerator_kit.pdf

Dennis

Dennis S wrote on Fri, 03 February 2012 15:43

Brian Waddell wrote on Fri, 03 February 2012 15:36

Dennis S
73 Painted Desert 230
Memphis TN Metro

Report message to a moderator

Re: [GMCnet] macerator valve [message #159132 is a reply to message #159128]

Fri, 03 February 2012 15:49

GMC Cruse

Messages: 606
Registered: June 2009
Location: SE Michigan

Karma: 3

Senior Member

Brian Waddell wrote on Fri, 03 February 2012 16:36

According to his "daily prose", he's at an FMCA rally and he posted you can call him on his cell phone if the need arises.

Mike K. '75 PB Southeast Michigan

Report message to a moderator

Re: [GMCnet] macerator valve [message #159134 is a reply to message #159128]

Fri, 03 February 2012 15:52

emerystora

Messages: 4442
Registered: January 2004

Karma: 13

Senior Member

If you are using a Thetford replacement valve you should leave the flange that is attached to the tank in place. The new valve comes with a rubber seal that fits into the indentations inside the flange.

Emery Stora

On Feb 3, 2012, at 2:36 PM, Brian Waddell wrote:

>
>
>
> I got my new macerator kit from one of the jim b.....I,was planning to install it this weekend,using the gmc coop members section as a guide but.....the site is not accepting my user code or passwordThere is no one at the coop thurs fri sat sun. I have looked at Jim k's site applied......this site does not show if I should take the old valve off completely or leave the inside part that is attached to the black tank....or WHAT......can anyone help....thanks...brian 77ele455
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] macerator valve [message #159135 is a reply to message #159128]

Fri, 03 February 2012 15:57

skip2

Messages: 544
Registered: September 2011
Location: Winter Haven,FL (center o...

Karma: 3

Senior Member

When the PO did mine he left the valve which I've found is a good ideal if you have to go into the pump with a full tank.
Skip

74 Canyon Lands, FiTech, 3.7 FD LSD, Manny Tranny, Springfield Distributor, 2001 Chevy Tracker Ragtop Towd

Report message to a moderator

Re: [GMCnet] macerator valve [message #159142 is a reply to message #159135]

Fri, 03 February 2012 16:24

Brian Waddell

Messages: 409
Registered: March 2010

Karma: -4

Senior Member

the new valve assembly has a new slide valve, actually one large oen and one small one...brian> To: gmclist@temp.gmcnet.org
> From: skiphartline@aol.com
> Date: Fri, 3 Feb 2012 15:57:31 -0600
> Subject: Re: [GMCnet] macerator valve
>
>
>
> When the PO did mine he left the valve which I've found is a good ideal if you have to go into the pump with a full tank.
> Skip
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] macerator valve [message #159147 is a reply to message #159129]

Fri, 03 February 2012 16:33

Brian Waddell

Messages: 409
Registered: March 2010

Karma: -4

Senior Member

I do not have that flange that attaches to the remaing valve and accepts the new approx 2 ft of abs........where did that flange come from?
> To: gmclist@temp.gmcnet.org
> From: dennisfsexton@aol.com
> Date: Fri, 3 Feb 2012 15:43:12 -0600
> Subject: Re: [GMCnet] macerator valve
>
>
>
> Brian,
>
> I don't know the kit -- but here is what I did..
>
> http://www.gmcmhphotos.com/photos/showgallery.php?cat=5767
>
> and there is this...with several links.
>
> http://gmcmotorhome.info/list.html#macerator
>
> Dennis
>
> Brian Waddell wrote on Fri, 03 February 2012 15:36
> > I got my new macerator kit from one of the jim b.....I,was planning to install it this weekend,using the gmc coop members section as a guide but.....the site is not accepting my user code or passwordThere is no one at the coop thurs fri sat sun. I have looked at Jim k's site applied......this site does not show if I should take the old valve off completely or leave the inside part that is attached to the black tank....or WHAT......can anyone help....thanks...brian 77ele455
> >
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
> --
> Dennis S
> 73 Painted Desert 230
> Germantown, TN
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] macerator valve [message #159148 is a reply to message #159132]

Fri, 03 February 2012 16:36

Brian Waddell

Messages: 409
Registered: March 2010

Karma: -4

Senior Member

are you able to give out that cell #?.......brian
> To: gmclist@temp.gmcnet.org
> From: carcruse@comcast.net
> Date: Fri, 3 Feb 2012 15:49:45 -0600
> Subject: Re: [GMCnet] macerator valve
>
>
>
> Brian Waddell wrote on Fri, 03 February 2012 16:36
> > I got my new macerator kit from one of the jim b.....I,was planning to install it this weekend,using the gmc coop members section as a guide but.....the site is not accepting my user code or passwordThere is no one at the coop thurs fri sat sun. I have looked at Jim k's site applied......this site does not show if I should take the old valve off completely or leave the inside part that is attached to the black tank....or WHAT......can anyone help....thanks...brian 77ele455
> >
> >
> > _______________________________________________
>
>
> According to his "daily prose", he's at an FMCA rally and he posted you can call him on his cell phone if the need arises.
> --
> Mike K.
> '75 PB
> Southeast Michigan
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] macerator valve [message #159149 is a reply to message #159128]

Fri, 03 February 2012 16:39

USAussie

Messages: 15912
Registered: July 2007
Location: Sydney, Australia

Karma: 6

Senior Member

Brian,

I just logged into the Coop's Members Only pages and clicked on each and every link there but couldn't find anything about
installing a macerator.

Regards,
Rob M.

-----Original Message-----
From: Brian Waddell

I got my new macerator kit from one of the jim b.....I,was planning to install it this weekend,using the gmc coop members section
as a guide but.....the site is not accepting my user code or passwordThere is no one at the coop thurs fri sat sun. I have looked at
Jim k's site applied......this site does not show if I should take the old valve off completely or leave the inside part that is
attached to the black tank....or WHAT......can anyone help....thanks...brian 77ele455

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426

Report message to a moderator

Re: [GMCnet] macerator valve [message #159150 is a reply to message #159148]

Fri, 03 February 2012 16:42

USAussie

Messages: 15912
Registered: July 2007
Location: Sydney, Australia

Karma: 6

Senior Member

Brian,

It's (321) 299-5707

Regards,
Rob M.
�
-----Original Message-----
From: Brian Waddell

are you able to give out that cell #?.......brian

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426

Report message to a moderator

Re: [GMCnet] macerator valve [message #159151 is a reply to message #159149]

Fri, 03 February 2012 16:42

Brian Waddell

Messages: 409
Registered: March 2010

Karma: -4

Senior Member

OH......I understood from jim b. that it was on mechanicals in members only section
> From: robmueller@iinet.net.au
> To: gmclist@temp.gmcnet.org
> Date: Sat, 4 Feb 2012 09:39:39 +1100
> Subject: Re: [GMCnet] macerator valve
>
> Brian,
>
> I just logged into the Coop's Members Only pages and clicked on each and every link there but couldn't find anything about
> installing a macerator.
>
> Regards,
> Rob M.
>
> -----Original Message-----
> From: Brian Waddell
>
> I got my new macerator kit from one of the jim b.....I,was planning to install it this weekend,using the gmc coop members section
> as a guide but.....the site is not accepting my user code or passwordThere is no one at the coop thurs fri sat sun. I have looked at
> Jim k's site applied......this site does not show if I should take the old valve off completely or leave the inside part that is
> attached to the black tank....or WHAT......can anyone help....thanks...brian 77ele455
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] macerator valve [message #159157 is a reply to message #159151]

Fri, 03 February 2012 17:21

USAussie

Messages: 15912
Registered: July 2007
Location: Sydney, Australia

Karma: 6

Senior Member

Brian,

I just logged in again, copied the entire Members Mechanical page and I'll send it to you in an OFF NET message in HTML format so
you can see what's there.

Regards,
Rob M.

-----Original Message-----
From: Brian Waddell

OH......I understood from jim b. that it was on mechanicals in members only section

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426

Report message to a moderator

Re: [GMCnet] macerator valve [message #159158 is a reply to message #159150]

Fri, 03 February 2012 17:26

Brian Waddell

Messages: 409
Registered: March 2010

Karma: -4

Senior Member

thanks..I will call him later or in am...brian

> From: robmueller@iinet.net.au
> To: gmclist@temp.gmcnet.org
> Date: Sat, 4 Feb 2012 09:42:11 +1100
> Subject: Re: [GMCnet] macerator valve
>
> Brian,
>
> It's (321) 299-5707
>
> Regards,
> Rob M.
>
> -----Original Message-----
> From: Brian Waddell
>
> are you able to give out that cell #?.......brian
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Previous Topic:	[GMCnet] LED comparison and power consumption display
Next Topic:	Re: [GMCnet] Airtech or Firestone?

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Oct 28 05:24:54 CDT 2024

Total time taken to generate the page: 0.00984 seconds