| Leak problems toll window how to fix ??? [message #157640] |
Sun, 22 January 2012 16:08  |
glacierfl
Messages: 444
Registered: June 2011
Karma: 0
|
Senior Member |
|
|
Hello,
I am repainting the toll windows. I took the passenger window out, and noticed problems with the frame. The OEM installation was less than perfect. I have taken some pictures of the problems.
http://www.gmcmhphotos.com/photos/showphoto.php?photo=42453&title=passener-toll-window-a&cat=5949
Looking for input on the best way to fix this problem. As you may see from pictures the body work is separated from the window area. The body filler they used was causing part of the frame area to be out of line with the window area. I would like to repair this area. What do i need to refix the body panel into the frame area, also what to use to refill the gaps in the area.
Not taken the other window out yet, but I suspect its going to be the same kind of setup....
Thanks for any help on this issue.
Steve & Debbie
Monticello, FL
77 Palm Beach :- Aurora
EX G4WDT
|
|
|
|
| Re: [GMCnet] Leak problems toll window how to fix ??? [message #157666 is a reply to message #157640] |
Sun, 22 January 2012 19:29  |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Be sure to punch a round hole on the bottom felt where there is a slit
on the frame.
There is a fin felt gasket when the two glass slides. If you need some
I'll send them as a comp. as it is not expensive as we use similar
ones on our Air Filter Housing that we produce.
On Sun, Jan 22, 2012 at 2:08 PM, steve & debbie <zzdebz@yahoo.com> wrote:
>
>
> Hello,
>
> I am repainting the toll windows. I took the passenger window out, and noticed problems with the frame. The OEM installation was less than perfect. I have taken some pictures of the problems.
>
> http://www.gmcmhphotos.com/photos/showphoto.php?photo=42453&title=passener-toll-window-a&cat=5949
>
> Looking for input on the best way to fix this problem. As you may see from pictures the body work is separated from the window area. The body filler they used was causing part of the frame area to be out of line with the window area. I would like to repair this area. What do i need to refix the body panel into the frame area, also what to use to refill the gaps in the area.
> Not taken the other window out yet, but I suspect its going to be the same kind of setup....
>
> Thanks for any help on this issue.
> --
> Steve & Debbie
> Monticello, FL
> 77 Palm Beach :- Aurora
> EX G4WDT
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
