Front sunroof Who has one ??? [message #156640] |
Fri, 13 January 2012 23:50 |
glacierfl
Messages: 444 Registered: June 2011
Karma: 0
|
Senior Member |
|
|
Hello,
I remember seeing a picture somewhere of a GMC, that had an electric sunroof in the front drivers section. does anyone know who this is????. I want to find out the unit they used.
cheers and beers
Steve & Debbie
Monticello, FL
77 Palm Beach :- Aurora
EX G4WDT
|
|
|
Re: Front sunroof Who has one ??? [message #156675 is a reply to message #156640] |
Sat, 14 January 2012 10:46 |
RadioActiveGMC
Messages: 1020 Registered: November 2010 Location: Hot AZ desert
Karma: 0
|
Senior Member |
|
|
Not me, but while I was at HomeDepot I was brainstorming about using a small house clear roof dome. Cut a hole in the roof and adhere it. May not open but would add light. I'm sure I could ponder a way of making it open. I love modifying stuff. I'm sure it would be cheap and easy.
I'm almost done with my gray water valve to divert gray water to a hose bib outside so it doesn't go into the black tank to save room in it when on a good size trip. Modifying stuff is fun!
***"Gettin There"-1973 23' Sequoia-
Michael, Onans smell, "Go solar/wind power!"
|
|
|
Re: Front sunroof Who has one ??? [message #156694 is a reply to message #156640] |
Sat, 14 January 2012 16:43 |
Larry C
Messages: 1168 Registered: July 2004 Location: NE Illinois by the Illino...
Karma: 0
|
Senior Member |
|
|
Well, it wouldn't be electric but you can get a clear hatch for a boat to put up there. They come in many sizes and you can have a tint put on it to keep the heat out ( reflective tint ). They open and you can put a screen on them.
Just what I have seen
Gatsbys' CRUISER 08-18-04
74 GLACIER X, 260/455-APC-4 Bagg'r
Remflex Manifold gaskets
CampGrounds needed, Add yours to "PLACES" />
http://www.gmceast.com/travel
_
|
|
|
Re: Front sunroof Who has one ??? [message #156695 is a reply to message #156694] |
Sat, 14 January 2012 16:45 |
jknezek
Messages: 1057 Registered: December 2007
Karma: 5
|
Senior Member |
|
|
Depending on how big you want it, why not just cut another vent hold up front? I know structurally that area is a bit thin, so I wouldn't want to put too much weight up there. But a standard 14x14 vent hole would allow you to go with anything from a fantastic fan to just a cheap RV vent.
Thanks,
Jeremy Knezek
1976 Glenbrook
Birmingham, AL
|
|
|
|
Re: Front sunroof Who has one ??? [message #156747 is a reply to message #156697] |
Sun, 15 January 2012 03:24 |
glacierfl
Messages: 444 Registered: June 2011
Karma: 0
|
Senior Member |
|
|
Hello,
Willem, If you could get the Model number, would help us out.
Looks very nice i think. It's an addition, i am thinking about, As redoing, the front led markers, new Tv antenna etc, so while i have the front roof apart, may as well look for stuff that would make life better.... Would think the air flow would be much improved on a warm day with a vent/sunroof there.
Have a sunroof on minivan here, and that makes a real difference.
Does not look like you reinforced the roof, i guess due to the shape, construction of it, that not needed.
cheers and beers :- Steve
Steve & Debbie
Monticello, FL
77 Palm Beach :- Aurora
EX G4WDT
|
|
|
Re: Front sunroof Who has one ??? [message #156774 is a reply to message #156640] |
Sun, 15 January 2012 10:19 |
willem
Messages: 14 Registered: December 2010
Karma: 0
|
Junior Member |
|
|
hello,
it is a webasto/hollandia type 300 large,i have mine from the scrapyard.
http://www.webastosunroofs.com/products/sunroofs/hollandia-300.html
the 300 whit the sliding sunblind wil not fit, sunblind moves backwards under the roof,this is not possible in the GMC,if you delete this it is not a problem, the one whit the rollo will fit.
i have not reinforced the roof, the outer aluminium and the inner steel from the sunroof ad strenght to the roof.
in the past, webasto use a name for the 300, is was the same size, only the glas has a pattern on it (colored dots all over).
i make more pictures off it this week.
willem
[Updated on: Sun, 15 January 2012 10:23] Report message to a moderator
|
|
|