| OTC 7822A torsion bar tool [message #153886] |
Wed, 21 December 2011 08:47  |
Surbo
Messages: 213
Registered: February 2004
Karma: 0
|
Senior Member |
|
|
This tool will do the job, it was made for the K3500 GM trucks. It has a 3/4" bolt with 1" hex head for socket wrench. It is slightly offset to help with more clearance. You can get these at Summit Racing, O,Reillys or watch Amazon or Ebay for some specials. I fabricated a extra support piece for the top of the cross member to spread the load out on the cross member. I will post a pic of that later.
http://www.foxruntools.com/torsionbarunloading.aspx
Bob Drewes in SESD
|
|
|
|
| Re: [GMCnet] OTC 7822A torsion bar tool [message #154014 is a reply to message #153886] |
Wed, 21 December 2011 22:27  |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Suspension Max has one that is patented, it seems to be identical ,but
with a nut head incorperated on the tool to allow a closed end wrench
to keep the unit from pivoting.
We have that one on our site and the price is good and made here in the USA.
On Wed, Dec 21, 2011 at 6:47 AM, Bob Drewes <bmdrewes@iw.net> wrote:
>
>
> This tool will do the job, it was made for the K3500 GM trucks. It has a 3/4" bolt with 1" hex head for socket wrench. It is slightly offset to help with more clearance. You can get these at Summit Racing, O,Reillys or watch Amazon or Ebay for some specials. I fabricated a extra support piece for the top of the cross member to spread the load out on the cross member. I will post a pic of that later.
>
> http://www.foxruntools.com/torsionbarunloading.aspx
>
> Bob Drewes in SESD
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
