GMCforum: GMCnet » Cad 500 header photos

Home » Public Forums » GMCnet » Cad 500 header photos

Show: Today's Messages :: Polls :: Message Navigator

Cad 500 header photos [message #153114]

Thu, 15 December 2011 19:44

Larry

Messages: 2875
Registered: January 2004
Location: Menomonie, WI

Karma: 10

Senior Member

For those that are interested, I have posted pics of a set of headers for the Cadillac 500 installed in a GMCMH. These headers are bent using a standard exhaust tube bender.

http://www.gmcmhphotos.com/photos/showgallery.php?cat=5970

The following photos are from Russ Harms and are Cad 500 headers...Mandrel bent.

http://www.gmcmhphotos.com/photos/showphoto.php?photo=7216&cat=3476

Larry

78 Royale w/500 Caddy
Menomonie, WI.

Report message to a moderator

Re: [GMCnet] Cad 500 header photos [message #153122 is a reply to message #153114]

Thu, 15 December 2011 20:02

USAussie

Messages: 15912
Registered: July 2007
Location: Sydney, Australia

Karma: 6

Senior Member

Larry,

Thanks!

Considering the RPM's the Caddy runs at in a GMC I reckon the standard ones will work just fine.

Regards,
Rob
�
-----Original Message-----
From: Larry

For those that are interested, I have posted pics of a set of headers for the Cadillac 500 installed in a GMCMH. These headers are
bent using a standard exhaust tube bender.

http://www.gmcmhphotos.com/photos/showgallery.php?cat=5970

The following photos are from Russ Harms and are Cad 500 headers...Mandrel bent.

http://www.gmcmhphotos.com/photos/showphoto.php?photo=7216&cat=3476
--
Larry :)

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426

Report message to a moderator

Re: [GMCnet] Cad 500 header photos [message #153127 is a reply to message #153122]

Thu, 15 December 2011 20:18

k2gkk

Messages: 4452
Registered: November 2009

Karma: -8

Senior Member

Plus, I'd hate to try to get those "mandrel bent"
headers to seal to the heads!

~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
~~ ~ D C "Mac" Macdonald ~ ~~
~ ~ Amateur Radio - K2GKK ~ ~
~ ~ USAF and FAA, Retired ~ ~
~ ~ ~ Oklahoma City, OK ~ ~ ~
~~ ~ ~ "The Money Pit" ~ ~ ~~
~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
~ www.gmcmhphotos.com/okclb ~
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
_______________
*[ ]....[][ ][]\
*--OO---[]---O-*

> From: robmueller@iinet.net.au
> To: gmclist@temp.gmcnet.org
> Date: Fri, 16 Dec 2011 13:02:35 +1100
> Subject: Re: [GMCnet] Cad 500 header photos
>
> Larry,
>
> Thanks!
>
> Considering the RPM's the Caddy runs at in a GMC I reckon the standard ones will work just fine.
>
> Regards,
> Rob
>
> -----Original Message-----
> From: Larry
>
> For those that are interested, I have posted pics of a set of headers for the Cadillac 500 installed in a GMCMH. These headers are
> bent using a standard exhaust tube bender.
>
> http://www.gmcmhphotos.com/photos/showgallery.php?cat=5970
>
> The following photos are from Russ Harms and are Cad 500 headers...Mandrel bent.
>
> http://www.gmcmhphotos.com/photos/showphoto.php?photo=7216&cat=3476
> --
> Larry :)
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Cad 500 header photos [message #153131 is a reply to message #153122]

Thu, 15 December 2011 20:28

Ken Henderson

Messages: 8726
Registered: March 2004
Location: Americus, GA

Karma: 9

Senior Member

Shame my thoughts have to get to Wisconsin via Sydney!

Ken H.

On Thu, Dec 15, 2011 at 9:02 PM, Rob Mueller wrote:

> Larry,
>
> Thanks!
>
> Considering the RPM's the Caddy runs at in a GMC I reckon the standard
> ones will work just fine.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach

Report message to a moderator

Re: [GMCnet] Cad 500 header photos [message #153136 is a reply to message #153131]

Thu, 15 December 2011 20:58

jimk

Messages: 6734
Registered: July 2006
Location: Belmont, CA

Karma: 9

Senior Member

The bolting for the Cad exhaust is considerably better than the
Olds.you have almost twice as many at places that help seal.

On Thu, Dec 15, 2011 at 6:28 PM, Ken Henderson <hend4800@bellsouth.net> wrote:
> Shame my thoughts have to get to Wisconsin via Sydney!
>
> Ken H.
>
>
> On Thu, Dec 15, 2011 at 9:02 PM, Rob Mueller wrote:
>
>> Larry,
>>
>> Thanks!
>>
>> Considering the RPM's the Caddy runs at in a GMC I reckon the standard
>> ones will work just fine.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502

Report message to a moderator

Previous Topic:	[GMCnet] Pair of Palm Beaches for sale
Next Topic:	torsion bar adjuster tool

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 20 08:33:11 CDT 2024

Total time taken to generate the page: 0.01009 seconds