Saginaw steering gearbox-spool valve torsion bar [message #152631] |
Mon, 12 December 2011 09:06 |
Surbo
Messages: 213 Registered: February 2004
Karma: 0
|
Senior Member |
|
|
Howdy;
The Saginaw steering gearbox has a spool valve assy with a torsion bar to control the spool valve. I had a list of various spool valve assy and the various torsion bar tensions for various vehicles, now I can't find that list. I have talked with Fritz Slama and Don Wirth on this topic, but can't find the GM parts list that I had for the various valves/torsion bar. I would think G Kosier would have some info on this, what say ye Gary?
Bob Drewes in SESD '73 26' w/455/TBI/EBL/1 ton front end
|
|
|
Re: [GMCnet] Saginaw steering gearbox-spool valve torsion bar [message #152634 is a reply to message #152631] |
Mon, 12 December 2011 09:28 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Bob,
I just did a quick Google search and found this table which gives torsion
bar diameters in an assortment of vehicles -- no PN's though:
http://www.chevelles.com/techref/shea_3.html
How'd your ride height come out after installing the 1-Ton?
Ken H.
On Mon, Dec 12, 2011 at 10:06 AM, Bob Drewes wrote:
>
>
> Howdy;
> The Saginaw steering gearbox has a spool valve assy with a torsion bar to
> control the spool valve. I had a list of various spool valve assy and the
> various torsion bar tensions for various vehicles, now I can't find that
> list. I have talked with Fritz Slama and Don Wirth on this topic, but can't
> find the GM parts list that I had for the various valves/torsion bar. I
> would think G Kosier would have some info on this, what say ye Gary?
>
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|