|
Re: [GMCnet] Calling all tool junkies! [message #152587 is a reply to message #152560] |
Sun, 11 December 2011 20:55 |
|
Now, that's my kind of drill/driver. I have carrying two around the house when doing the "honey hang this" routine. You and I must be lazy but at least you'd always have a drill in the chuck as well as a screwdriver. Next problem is, which driver?
--
Byron Songer
Full-timing to enjoy the USA
Former owner but still an admirer
GMC paint schemes at -
http://www.songerconsulting.net
|
|
|
Re: [GMCnet] Calling all tool junkies! [message #152593 is a reply to message #152587] |
Sun, 11 December 2011 21:19 |
midlf
Messages: 2212 Registered: July 2007 Location: SE Wisc. (Palmyra)
Karma: 1
|
Senior Member |
|
|
Byron Songer wrote on Sun, 11 December 2011 20:55 | Now, that's my kind of drill/driver. I have carrying two around the house when doing the "honey hang this" routine. You and I must be lazy but at least you'd always have a drill in the chuck as well as a screwdriver. Next problem is, which driver?
|
You can also give this a look.
https://www.gethalftime.com/?MID=1350105&gclid=CMfIuq7J-6wCFcYKKgoduX-wRw
I don't have one, just thinkin about it.
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
|
|
|
Re: [GMCnet] Calling all tool junkies! [message #152598 is a reply to message #152587] |
Sun, 11 December 2011 21:53 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
I just use my little 1/4" DeWalt impact wrench for everything. With its
quick release for 1/4" hex tools, it's only necessary to carry a few hex
base drills & driver bits.
IIRC, somewhere in the DeWalt instructions it says don't use it as a drill.
Hogwash! Never had a problem -- with tiny or large spade bits, it just
zips right through. When breaking through steel, it may rap a time or two,
but I've never had it bind nor break a bit.
Ken H.
On Sun, Dec 11, 2011 at 9:55 PM, Byron Songer wrote:
>
>
> Now, that's my kind of drill/driver. I have carrying two around the house
> when doing the "honey hang this" routine. You and I must be lazy but at
> least you'd always have a drill in the chuck as well as a screwdriver. Next
> problem is, which driver?
>
> --
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|