Home » Public Forums » GMCnet » GM Floorplan furniture floor bolts (GM Floorplan furniture floor bolts)
GM Floorplan furniture floor bolts [message #150274] |
Sun, 20 November 2011 16:57 |
jknezek
Messages: 1057 Registered: December 2007
Karma: 5
|
Senior Member |
|
|
Exactly what do the floorbolts on the GM floor plan (for ex a Glenbrook) tie into? Several of the bolts that hold the front furniture, the dining coaches and the bunk couch, just spin the holes and don't seem to grab on anything. I'm debating tearing out the carpet that I put in a few years ago and putting down some leftover laminate from my basement, but I'm curious how important it is to get those bolts into the holes, especially since several of mine don't seem to catch on anything.
Given that the seats all have seatbelts, I can only assume they are supposed to bolt down into something in the floor besides plywood.
Thanks,
Jeremy Knezek
1976 Glenbrook
Birmingham, AL
|
|
|
Re: [GMCnet] GM Floorplan furniture floor bolts [message #150277 is a reply to message #150274] |
Sun, 20 November 2011 17:19 |
Kingsley Coach
Messages: 2691 Registered: March 2009 Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
When I gutted mine most were just screwed into the plywood on the floor,
but the odd one had a bolt that appears to have been underneath the
coach...put some upwards prying on the bolt and see if it will back out.
Mike in NS
On Sun, Nov 20, 2011 at 6:57 PM, Jeremy <jtknezek@hotmail.com> wrote:
>
>
> Exactly what do the floorbolts on the GM floor plan (for ex a Glenbrook)
> tie into? Several of the bolts that hold the front furniture, the dining
> coaches and the bunk couch, just spin the holes and don't seem to grab on
> anything. I'm debating tearing out the carpet that I put in a few years ago
> and putting down some leftover laminate from my basement, but I'm curious
> how important it is to get those bolts into the holes, especially since
> several of mine don't seem to catch on anything.
>
> Given that the seats all have seatbelts, I can only assume they are
> supposed to bolt down into something in the floor besides plywood.
> --
> Thanks,
> Jeremy Knezek
> 1976 Glenbrook
> Birmingham, AL
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
Re: GM Floorplan furniture floor bolts [message #150312 is a reply to message #150274] |
Sun, 20 November 2011 22:53 |
bwevers
Messages: 597 Registered: October 2010 Location: San Jose
Karma: 5
|
Senior Member |
|
|
Jeremy,
The dinette in my Glenbrook had the same problem.
The wood underneath was old and bolts could not be tightened much.
I used the next larger size lag bolts for a tighter fit.
Regards,
Bill
Bill Wevers GMC49ers, GMC Western States
1975 Glenbrook - Manny Powerdrive, OneTon
455 F Block, G heads
San Jose
|
|
|
|
Re: [GMCnet] GM Floorplan furniture floor bolts [message #150335 is a reply to message #150334] |
Mon, 21 November 2011 08:52 |
gmcrv1
Messages: 839 Registered: August 2007 Location: Memphis
Karma: -1
|
Senior Member |
|
|
Mike,
Take it with you?
How about like this...
http://www.roadsideamerica.com/story/10560
Being an old Mercedes guy, I actually went and saw this back in the 1980's.
Full size MB limo that weighs about 36 tons. Zero MPG.
Tom Eckert N2VWN
73 Glacier
Oakland, TN
On Mon, Nov 21, 2011 at 8:36 AM, Kingsley Coach <kingsleygmc@gmail.com>wrote:
> That's what it was!!
> The seat belts were connected to something solid and were threaded in, and
> the rest of the furniture was just screwed into the floor.
> I removed all seat belts except for the drivers and passenger seats...I
> hope it discourages passengers and since I will be taking my Kingsley with
> me, I'm not concerned about the Next owner!
>
>
> Mike in NS
>
>
>
> On Mon, Nov 21, 2011 at 12:53 AM, Bill Wevers <gmc1975@att.net> wrote:
>
> >
> >
> > Jeremy,
> > The dinette in my Glenbrook had the same problem.
> > The wood underneath was old and bolts could not be tightened much.
> > I used the next larger size lag bolts for a tighter fit.
> >
> > Regards,
> > Bill
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
>
>
>
> --
> Michael Beaton
> 1977 Kingsley 26-11
> 1977 Eleganza II 26-3
> Antigonish, NS
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] GM Floorplan furniture floor bolts [message #150340 is a reply to message #150335] |
Mon, 21 November 2011 10:35 |
k2gkk
Messages: 4452 Registered: November 2009
Karma: -8
|
Senior Member |
|
|
I especially like the note at the end of the article:
"A side note: In 1988, the brother, Raymond David Tse,
was indicted on murder charges after admitting he fired
18 bullets at a gang member in his Chinatown office who
was demanding protection money at gunpoint. Tse claimed
self defense, and was acquitted in 1991."
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
~~ ~ D C "Mac" Macdonald ~ ~~
~ ~ Amateur Radio - K2GKK ~ ~
~ ~ USAF and FAA, Retired ~ ~
~ ~ ~ Oklahoma City, OK ~ ~ ~
~~ ~ ~ "The Money Pit" ~ ~ ~~
~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
~ www.gmcmhphotos.com/okclb ~
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
Fathom the hypocrisy of a Congress
that will require every citizen to
prove that he or she has insurance
but not require that each of those
must prove he or she is a citizen!
> Date: Mon, 21 Nov 2011 08:52:24 -0600
> From: gmcrv1@gmail.com
> To: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] GM Floorplan furniture floor bolts
>
> Mike,
>
> Take it with you?
>
> How about like this...
>
> http://www.roadsideamerica.com/story/10560
>
> Being an old Mercedes guy, I actually went and saw this back in the 1980's.
> Full size MB limo that weighs about 36 tons. Zero MPG.
>
>
> Tom Eckert N2VWN
> 73 Glacier
> Oakland, TN
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] GM Floorplan furniture floor bolts [message #150353 is a reply to message #150335] |
Mon, 21 November 2011 12:34 |
Kingsley Coach
Messages: 2691 Registered: March 2009 Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
Tom
Maybe I should get my Kingsley galvanized inside and out, glass
included...it would be cheaper than a granite tombstone! <g>
Mike
On Mon, Nov 21, 2011 at 10:52 AM, Tom Eckert <gmcrv1@gmail.com> wrote:
> Mike,
>
> Take it with you?
>
> How about like this...
>
> http://www.roadsideamerica.com/story/10560
>
> Being an old Mercedes guy, I actually went and saw this back in the 1980's.
> Full size MB limo that weighs about 36 tons. Zero MPG.
>
>
> Tom Eckert N2VWN
> 73 Glacier
> Oakland, TN
>
> On Mon, Nov 21, 2011 at 8:36 AM, Kingsley Coach <kingsleygmc@gmail.com
> >wrote:
>
> > That's what it was!!
> > The seat belts were connected to something solid and were threaded in,
> and
> > the rest of the furniture was just screwed into the floor.
> > I removed all seat belts except for the drivers and passenger seats...I
> > hope it discourages passengers and since I will be taking my Kingsley
> with
> > me, I'm not concerned about the Next owner!
> >
> >
> > Mike in NS
> >
> >
> >
> > On Mon, Nov 21, 2011 at 12:53 AM, Bill Wevers <gmc1975@att.net> wrote:
> >
> > >
> > >
> > > Jeremy,
> > > The dinette in my Glenbrook had the same problem.
> > > The wood underneath was old and bolts could not be tightened much.
> > > I used the next larger size lag bolts for a tighter fit.
> > >
> > > Regards,
> > > Bill
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > >
> >
> >
> >
> > --
> > Michael Beaton
> > 1977 Kingsley 26-11
> > 1977 Eleganza II 26-3
> > Antigonish, NS
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] GM Floorplan furniture floor bolts [message #150387 is a reply to message #150353] |
Mon, 21 November 2011 21:20 |
gmcrv1
Messages: 839 Registered: August 2007 Location: Memphis
Karma: -1
|
Senior Member |
|
|
For sure. I have a couple of 1956 Tbirds and the bird brains in the local
clubs all want the porthole from the hardtop installed in their caskets. I
think I'll leave the cars behind for the next guy. Besides, I have no idea
of what the roads will be like where I'm going...(lol)
Tom Eckert
N2VWN
73 Glacier
Oakland.,TN.
On Mon, Nov 21, 2011 at 12:34 PM, Kingsley Coach <kingsleygmc@gmail.com>wrote:
> Tom
>
> Maybe I should get my Kingsley galvanized inside and out, glass
> included...it would be cheaper than a granite tombstone! <g>
>
> Mike
>
>
>
>
> On Mon, Nov 21, 2011 at 10:52 AM, Tom Eckert <gmcrv1@gmail.com> wrote:
>
> > Mike,
> >
> > Take it with you?
> >
> > How about like this...
> >
> > http://www.roadsideamerica.com/story/10560
> >
> > Being an old Mercedes guy, I actually went and saw this back in the
> 1980's.
> > Full size MB limo that weighs about 36 tons. Zero MPG.
> >
> >
> > Tom Eckert N2VWN
> > 73 Glacier
> > Oakland, TN
> >
> > On Mon, Nov 21, 2011 at 8:36 AM, Kingsley Coach <kingsleygmc@gmail.com
> > >wrote:
> >
> > > That's what it was!!
> > > The seat belts were connected to something solid and were threaded in,
> > and
> > > the rest of the furniture was just screwed into the floor.
> > > I removed all seat belts except for the drivers and passenger seats...I
> > > hope it discourages passengers and since I will be taking my Kingsley
> > with
> > > me, I'm not concerned about the Next owner!
> > >
> > >
> > > Mike in NS
> > >
> > >
> > >
> > > On Mon, Nov 21, 2011 at 12:53 AM, Bill Wevers <gmc1975@att.net> wrote:
> > >
> > > >
> > > >
> > > > Jeremy,
> > > > The dinette in my Glenbrook had the same problem.
> > > > The wood underneath was old and bolts could not be tightened much.
> > > > I used the next larger size lag bolts for a tighter fit.
> > > >
> > > > Regards,
> > > > Bill
> > > > _______________________________________________
> > > > GMCnet mailing list
> > > > Unsubscribe or Change List Options:
> > > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > > >
> > >
> > >
> > >
> > > --
> > > Michael Beaton
> > > 1977 Kingsley 26-11
> > > 1977 Eleganza II 26-3
> > > Antigonish, NS
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
>
>
>
> --
> Michael Beaton
> 1977 Kingsley 26-11
> 1977 Eleganza II 26-3
> Antigonish, NS
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] GM Floorplan furniture floor bolts [message #150388 is a reply to message #150340] |
Mon, 21 November 2011 21:21 |
gmcrv1
Messages: 839 Registered: August 2007 Location: Memphis
Karma: -1
|
Senior Member |
|
|
Now I have to go back and read the entire article...
Tom
On Mon, Nov 21, 2011 at 10:35 AM, D C *Mac* Macdonald <k2gkk@hotmail.com>wrote:
>
> I especially like the note at the end of the article:
>
> "A side note: In 1988, the brother, Raymond David Tse,
> was indicted on murder charges after admitting he fired
> 18 bullets at a gang member in his Chinatown office who
> was demanding protection money at gunpoint. Tse claimed
> self defense, and was acquitted in 1991."
>
> ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> ~~ ~ D C "Mac" Macdonald ~ ~~
> ~ ~ Amateur Radio - K2GKK ~ ~
> ~ ~ USAF and FAA, Retired ~ ~
> ~ ~ ~ Oklahoma City, OK ~ ~ ~
> ~~ ~ ~ "The Money Pit" ~ ~ ~~
> ~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
> ~ www.gmcmhphotos.com/okclb ~
> ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
>
> Fathom the hypocrisy of a Congress
> that will require every citizen to
> prove that he or she has insurance
> but not require that each of those
> must prove he or she is a citizen!
>
>
>
>
>
>
> > Date: Mon, 21 Nov 2011 08:52:24 -0600
> > From: gmcrv1@gmail.com
> > To: gmclist@temp.gmcnet.org
> > Subject: Re: [GMCnet] GM Floorplan furniture floor bolts
> >
> > Mike,
> >
> > Take it with you?
> >
> > How about like this...
> >
> > http://www.roadsideamerica.com/story/10560
> >
> > Being an old Mercedes guy, I actually went and saw this back in the
> 1980's.
> > Full size MB limo that weighs about 36 tons. Zero MPG.
> >
> >
> > Tom Eckert N2VWN
> > 73 Glacier
> > Oakland, TN
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] GM Floorplan furniture floor bolts [message #150393 is a reply to message #150388] |
Mon, 21 November 2011 23:31 |
Kingsley Coach
Messages: 2691 Registered: March 2009 Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
Tom
You've got me thinking...Where I'm going, I'd better make sure the air
conditioning is working Very well ! <VBG>
Mike...currently still on Earth
On Mon, Nov 21, 2011 at 11:21 PM, Tom Eckert <gmcrv1@gmail.com> wrote:
> Now I have to go back and read the entire article...
>
> Tom
>
> On Mon, Nov 21, 2011 at 10:35 AM, D C *Mac* Macdonald <k2gkk@hotmail.com
> >wrote:
>
> >
> > I especially like the note at the end of the article:
> >
> > "A side note: In 1988, the brother, Raymond David Tse,
> > was indicted on murder charges after admitting he fired
> > 18 bullets at a gang member in his Chinatown office who
> > was demanding protection money at gunpoint. Tse claimed
> > self defense, and was acquitted in 1991."
> >
> > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> > ~~ ~ D C "Mac" Macdonald ~ ~~
> > ~ ~ Amateur Radio - K2GKK ~ ~
> > ~ ~ USAF and FAA, Retired ~ ~
> > ~ ~ ~ Oklahoma City, OK ~ ~ ~
> > ~~ ~ ~ "The Money Pit" ~ ~ ~~
> > ~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
> > ~ www.gmcmhphotos.com/okclb ~
> > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> >
> > Fathom the hypocrisy of a Congress
> > that will require every citizen to
> > prove that he or she has insurance
> > but not require that each of those
> > must prove he or she is a citizen!
> >
> >
> >
> >
> >
> >
> > > Date: Mon, 21 Nov 2011 08:52:24 -0600
> > > From: gmcrv1@gmail.com
> > > To: gmclist@temp.gmcnet.org
> > > Subject: Re: [GMCnet] GM Floorplan furniture floor bolts
> > >
> > > Mike,
> > >
> > > Take it with you?
> > >
> > > How about like this...
> > >
> > > http://www.roadsideamerica.com/story/10560
> > >
> > > Being an old Mercedes guy, I actually went and saw this back in the
> > 1980's.
> > > Full size MB limo that weighs about 36 tons. Zero MPG.
> > >
> > >
> > > Tom Eckert N2VWN
> > > 73 Glacier
> > > Oakland, TN
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: GM Floorplan furniture floor bolts [message #150398 is a reply to message #150274] |
Tue, 22 November 2011 02:40 |
Adrien G.
Messages: 474 Registered: May 2008 Location: Burns Flat, OK 73624
Karma: 1
|
Senior Member |
|
|
Jerremy,
I have the same headache. Lag bolts work for a while, but rust and vibration does the job we now have.
What I'm thinking of doing, is epoxy stainless threaded insert into the floor ply ( mcmaster-carr # 91731A053 5/16-18, #91713A054 3/8-16 ).
If your holes are too large, epoxy a hard wood dowel in to fill the hole, then use zinc platted lag or wood screws. The last thing I want to do is cut the alum cover under the floor.
Hope this is something you can use.
Adrien & Jenny Genesoto
75 Glenbrook (26-3) Mods LS3.70 FD / Reaction Sys / 80mm Front&Intermidiate / Hydroboost / 16" Tires / Frame Rebuild / Interior Rebuild
Yuba City,Ca. Text 530-nine-3-three-3-nine-nine-6
|
|
|
Re: GM Floorplan furniture floor bolts [message #150401 is a reply to message #150274] |
Tue, 22 November 2011 06:23 |
|
mike miller
Messages: 3576 Registered: February 2004 Location: Hillsboro, Oregon
Karma: 0
|
Senior Member |
|
|
jknezek wrote on Sun, 20 November 2011 14:57 | Exactly what do the floorbolts on the GM floor plan (for ex a Glenbrook) tie into? ...
...
Given that the seats all have seatbelts, I can only assume they are supposed to bolt down into something in the floor besides plywood.
|
The requirement for seatbelts was only on the FORWARD FACING seats. For most coaches that would be the cockpit seats and one half the dinette. GM provided anchor points at those locations and (most likely) no where else. Here are pictures of my 1973 from the last time this subject came up:
<http://www.gmcmhphotos.com/photos/showphoto.php?photo=8276>
If your coach has seatbelts at other locations, I would check to see how they are installed.... they might not be up to the task, and could be more of a danger than a help.
Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo'
http://m000035.blogspot.com
|
|
|
Re: [GMCnet] GM Floorplan furniture floor bolts [message #150419 is a reply to message #150393] |
Tue, 22 November 2011 08:35 |
gmcrv1
Messages: 839 Registered: August 2007 Location: Memphis
Karma: -1
|
Senior Member |
|
|
Mike,
Well, let's hope were talking about long range planning. It will take me a
while to get my GMC RTR (Ready to Roll). Actually, it will roll. nut the
interior is under refurb.
Tom Eckert N2VWN
73 Glacier
Oakland, TN
On Mon, Nov 21, 2011 at 11:31 PM, Kingsley Coach <kingsleygmc@gmail.com>wrote:
> Tom
>
> You've got me thinking...Where I'm going, I'd better make sure the air
> conditioning is working Very well ! <VBG>
>
> Mike...currently still on Earth
>
>
>
>
> On Mon, Nov 21, 2011 at 11:21 PM, Tom Eckert <gmcrv1@gmail.com> wrote:
>
> > Now I have to go back and read the entire article...
> >
> > Tom
> >
> > On Mon, Nov 21, 2011 at 10:35 AM, D C *Mac* Macdonald <k2gkk@hotmail.com
> > >wrote:
> >
> > >
> > > I especially like the note at the end of the article:
> > >
> > > "A side note: In 1988, the brother, Raymond David Tse,
> > > was indicted on murder charges after admitting he fired
> > > 18 bullets at a gang member in his Chinatown office who
> > > was demanding protection money at gunpoint. Tse claimed
> > > self defense, and was acquitted in 1991."
> > >
> > > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> > > ~~ ~ D C "Mac" Macdonald ~ ~~
> > > ~ ~ Amateur Radio - K2GKK ~ ~
> > > ~ ~ USAF and FAA, Retired ~ ~
> > > ~ ~ ~ Oklahoma City, OK ~ ~ ~
> > > ~~ ~ ~ "The Money Pit" ~ ~ ~~
> > > ~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
> > > ~ www.gmcmhphotos.com/okclb ~
> > > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> > >
> > > Fathom the hypocrisy of a Congress
> > > that will require every citizen to
> > > prove that he or she has insurance
> > > but not require that each of those
> > > must prove he or she is a citizen!
> > >
> > >
> > >
> > >
> > >
> > >
> > > > Date: Mon, 21 Nov 2011 08:52:24 -0600
> > > > From: gmcrv1@gmail.com
> > > > To: gmclist@temp.gmcnet.org
> > > > Subject: Re: [GMCnet] GM Floorplan furniture floor bolts
> > > >
> > > > Mike,
> > > >
> > > > Take it with you?
> > > >
> > > > How about like this...
> > > >
> > > > http://www.roadsideamerica.com/story/10560
> > > >
> > > > Being an old Mercedes guy, I actually went and saw this back in the
> > > 1980's.
> > > > Full size MB limo that weighs about 36 tons. Zero MPG.
> > > >
> > > >
> > > > Tom Eckert N2VWN
> > > > 73 Glacier
> > > > Oakland, TN
> > >
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
>
>
>
> --
> Michael Beaton
> 1977 Kingsley 26-11
> 1977 Eleganza II 26-3
> Antigonish, NS
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] GM Floorplan furniture floor bolts [message #150421 is a reply to message #150419] |
Tue, 22 November 2011 08:47 |
Kingsley Coach
Messages: 2691 Registered: March 2009 Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
Tom
I have many projects on the go!
If I don't take on any new ones, I can have them All wrapped up by the time
I'm 113...and after that, my time is free to explore other things of
interest !
So don't rush on my account.... <VBG>
Mike
On Tue, Nov 22, 2011 at 10:35 AM, Tom Eckert <gmcrv1@gmail.com> wrote:
> Mike,
>
> Well, let's hope were talking about long range planning. It will take me a
> while to get my GMC RTR (Ready to Roll). Actually, it will roll. nut the
> interior is under refurb.
>
> Tom Eckert N2VWN
> 73 Glacier
> Oakland, TN
>
>
> On Mon, Nov 21, 2011 at 11:31 PM, Kingsley Coach <kingsleygmc@gmail.com
> >wrote:
>
> > Tom
> >
> > You've got me thinking...Where I'm going, I'd better make sure the air
> > conditioning is working Very well ! <VBG>
> >
> > Mike...currently still on Earth
> >
> >
> >
> >
> > On Mon, Nov 21, 2011 at 11:21 PM, Tom Eckert <gmcrv1@gmail.com> wrote:
> >
> > > Now I have to go back and read the entire article...
> > >
> > > Tom
> > >
> > > On Mon, Nov 21, 2011 at 10:35 AM, D C *Mac* Macdonald <
> k2gkk@hotmail.com
> > > >wrote:
> > >
> > > >
> > > > I especially like the note at the end of the article:
> > > >
> > > > "A side note: In 1988, the brother, Raymond David Tse,
> > > > was indicted on murder charges after admitting he fired
> > > > 18 bullets at a gang member in his Chinatown office who
> > > > was demanding protection money at gunpoint. Tse claimed
> > > > self defense, and was acquitted in 1991."
> > > >
> > > > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> > > > ~~ ~ D C "Mac" Macdonald ~ ~~
> > > > ~ ~ Amateur Radio - K2GKK ~ ~
> > > > ~ ~ USAF and FAA, Retired ~ ~
> > > > ~ ~ ~ Oklahoma City, OK ~ ~ ~
> > > > ~~ ~ ~ "The Money Pit" ~ ~ ~~
> > > > ~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
> > > > ~ www.gmcmhphotos.com/okclb ~
> > > > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> > > >
> > > > Fathom the hypocrisy of a Congress
> > > > that will require every citizen to
> > > > prove that he or she has insurance
> > > > but not require that each of those
> > > > must prove he or she is a citizen!
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > > Date: Mon, 21 Nov 2011 08:52:24 -0600
> > > > > From: gmcrv1@gmail.com
> > > > > To: gmclist@temp.gmcnet.org
> > > > > Subject: Re: [GMCnet] GM Floorplan furniture floor bolts
> > > > >
> > > > > Mike,
> > > > >
> > > > > Take it with you?
> > > > >
> > > > > How about like this...
> > > > >
> > > > > http://www.roadsideamerica.com/story/10560
> > > > >
> > > > > Being an old Mercedes guy, I actually went and saw this back in the
> > > > 1980's.
> > > > > Full size MB limo that weighs about 36 tons. Zero MPG.
> > > > >
> > > > >
> > > > > Tom Eckert N2VWN
> > > > > 73 Glacier
> > > > > Oakland, TN
> > > >
> > > > _______________________________________________
> > > > GMCnet mailing list
> > > > Unsubscribe or Change List Options:
> > > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > > >
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > >
> >
> >
> >
> > --
> > Michael Beaton
> > 1977 Kingsley 26-11
> > 1977 Eleganza II 26-3
> > Antigonish, NS
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] GM Floorplan furniture floor bolts [message #150424 is a reply to message #150421] |
Tue, 22 November 2011 09:14 |
Ray Erspamer
Messages: 1707 Registered: May 2007 Location: Milwaukee Wisconsin
Karma: -3
|
Senior Member |
|
|
113 ! I love it !!!
Last summer my son was home...........GMC was up on blocks, house kitchen is
torn apart, fireplace half installed in the living room, both workshops (garage
& basement) total disaster areas.......can't find one tool.....
He said "Dad, I think you need to start a few more projects"........
So sad by true.....I need to get organized !
Ray
Ray & Lisa Erspamer
78 Royale "Great Lakes Eagle"
Center Kitchen TZE368V101144
Wauwatosa, Wisconsin 53226
Email: 78GMC-Royale@att.net
414-745-3188
Web Site: http://ray-lisa.page.tl/
----- Original Message ----
From: Kingsley Coach <kingsleygmc@gmail.com>
To: gmclist@temp.gmcnet.org
Sent: Tue, November 22, 2011 8:47:41 AM
Subject: Re: [GMCnet] GM Floorplan furniture floor bolts
Tom
I have many projects on the go!
If I don't take on any new ones, I can have them All wrapped up by the time
I'm 113...and after that, my time is free to explore other things of
interest !
So don't rush on my account.... <VBG>
Mike
On Tue, Nov 22, 2011 at 10:35 AM, Tom Eckert <gmcrv1@gmail.com> wrote:
> Mike,
>
> Well, let's hope were talking about long range planning. It will take me a
> while to get my GMC RTR (Ready to Roll). Actually, it will roll. nut the
> interior is under refurb.
>
> Tom Eckert N2VWN
> 73 Glacier
> Oakland, TN
>
>
> On Mon, Nov 21, 2011 at 11:31 PM, Kingsley Coach <kingsleygmc@gmail.com
> >wrote:
>
> > Tom
> >
> > You've got me thinking...Where I'm going, I'd better make sure the air
> > conditioning is working Very well ! <VBG>
> >
> > Mike...currently still on Earth
> >
> >
> >
> >
> > On Mon, Nov 21, 2011 at 11:21 PM, Tom Eckert <gmcrv1@gmail.com> wrote:
> >
> > > Now I have to go back and read the entire article...
> > >
> > > Tom
> > >
> > > On Mon, Nov 21, 2011 at 10:35 AM, D C *Mac* Macdonald <
> k2gkk@hotmail.com
> > > >wrote:
> > >
> > > >
> > > > I especially like the note at the end of the article:
> > > >
> > > > "A side note: In 1988, the brother, Raymond David Tse,
> > > > was indicted on murder charges after admitting he fired
> > > > 18 bullets at a gang member in his Chinatown office who
> > > > was demanding protection money at gunpoint. Tse claimed
> > > > self defense, and was acquitted in 1991."
> > > >
> > > > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> > > > ~~ ~ D C "Mac" Macdonald ~ ~~
> > > > ~ ~ Amateur Radio - K2GKK ~ ~
> > > > ~ ~ USAF and FAA, Retired ~ ~
> > > > ~ ~ ~ Oklahoma City, OK ~ ~ ~
> > > > ~~ ~ ~ "The Money Pit" ~ ~ ~~
> > > > ~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
> > > > ~ www.gmcmhphotos.com/okclb ~
> > > > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> > > >
> > > > Fathom the hypocrisy of a Congress
> > > > that will require every citizen to
> > > > prove that he or she has insurance
> > > > but not require that each of those
> > > > must prove he or she is a citizen!
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > > Date: Mon, 21 Nov 2011 08:52:24 -0600
> > > > > From: gmcrv1@gmail.com
> > > > > To: gmclist@temp.gmcnet.org
> > > > > Subject: Re: [GMCnet] GM Floorplan furniture floor bolts
> > > > >
> > > > > Mike,
> > > > >
> > > > > Take it with you?
> > > > >
> > > > > How about like this...
> > > > >
> > > > > http://www.roadsideamerica.com/story/10560
> > > > >
> > > > > Being an old Mercedes guy, I actually went and saw this back in the
> > > > 1980's.
> > > > > Full size MB limo that weighs about 36 tons. Zero MPG.
> > > > >
> > > > >
> > > > > Tom Eckert N2VWN
> > > > > 73 Glacier
> > > > > Oakland, TN
> > > >
> > > > _______________________________________________
> > > > GMCnet mailing list
> > > > Unsubscribe or Change List Options:
> > > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > > >
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > >
> >
> >
> >
> > --
> > Michael Beaton
> > 1977 Kingsley 26-11
> > 1977 Eleganza II 26-3
> > Antigonish, NS
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Oakland, TN
>
>
> On Mon, Nov 21, 2011 at 11:31 PM, Kingsley Coach <kingsleygmc@gmail.com
> >wrote:
>
> > Tom
> >
> > You've got me thinking...Where I'm going, I'd better make sure the air
> > conditioning is working Very well ! <VBG>
> >
> > Mike...currently still on Earth
> >
> >
> >
> >
> > On Mon, Nov 21, 2011 at 11:21 PM, Tom Eckert <gmcrv1@gmail.com> wrote:
> >
> > > Now I have to go back and read the entire article...
> > >
> > > Tom
> > >
> > > On Mon, Nov 21, 2011 at 10:35 AM, D C *Mac* Macdonald <
> k2gkk@hotmail.com
> > > >wrote:
> > >
> > > >
> > > > I especially like the note at the end of the article:
> > > >
> > > > "A side note: In 1988, the brother, Raymond David Tse,
> > > > was indicted on murder charges after admitting he fired
> > > > 18 bullets at a gang member in his Chinatown office who
> > > > was demanding protection money at gunpoint. Tse claimed
> > > > self defense, and was acquitted in 1991."
> > > >
> > > > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> > > > ~~ ~ D C "Mac" Macdonald ~ ~~
> > > > ~ ~ Amateur Radio - K2GKK ~ ~
> > > > ~ ~ USAF and FAA, Retired ~ ~
> > > > ~ ~ ~ Oklahoma City, OK ~ ~ ~
> > > > ~~ ~ ~ "The Money Pit" ~ ~ ~~
> > > > ~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
> > > > ~ www.gmcmhphotos.com/okclb ~
> > > > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> > > >
> > > > Fathom the hypocrisy of a Congress
> > > > that will require every citizen to
> > > > prove that he or she has insurance
> > > > but not require that each of those
> > > > must prove he or she is a citizen!
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > > Date: Mon, 21 Nov 2011 08:52:24 -0600
> > > > > From: gmcrv1@gmail.com
> > > > > To: gmclist@temp.gmcnet.org
> > > > > Subject: Re: [GMCnet] GM Floorplan furniture floor bolts
> > > > >
> > > > > Mike,
> > > > >
> > > > > Take it with you?
> > > > >
> > > > > How about like this...
> > > > >
> > > > > http://www.roadsideamerica.com/story/10560
> > > > >
> > > > > Being an old Mercedes guy, I actually went and saw this back in the
> > > > 1980's.
> > > > > Full size MB limo that weighs about 36 tons. Zero MPG.
> > > > >
> > > > >
> > > > > Tom Eckert N2VWN
> > > > > 73 Glacier
> > > > > Oakland, TN
> > > >
> > > > _______________________________________________
> > > > GMCnet mailing list
> > > > Unsubscribe or Change List Options:
> > > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > > >
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > >
> >
> >
> >
> > --
> > Michael Beaton
> > 1977 Kingsley 26-11
> > 1977 Eleganza II 26-3
> > Antigonish, NS
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Oklahoma City, OK ~ ~ ~
> > > > ~~ ~ ~ "The Money Pit" ~ ~ ~~
> > > > ~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
> > > > ~ www.gmcmhphotos.com/okclb ~
> > > > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> > > >
> > > > Fathom the hypocrisy of a Congress
> > > > that will require every citizen to
> > > > prove that he or she has insurance
> > > > but not require that each of those
> > > > must prove he or she is a citizen!
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > > Date: Mon, 21 Nov 2011 08:52:24 -0600
> > > > > From: gmcrv1@gmail.com
> > > > > To: gmclist@temp.gmcnet.org
> > > > > Subject: Re: [GMCnet] GM Floorplan furniture floor bolts
> > > > >
> > > > > Mike,
> > > > >
> > > > > Take it with you?
> > > > >
> > > > > How about like this...
> > > > >
> > > > > http://www.roadsideamerica.com/story/10560
> > > > >
> > > > > Being an old Mercedes guy, I actually went and saw this back in the
> > > > 1980's.
> > > > > Full size MB limo that weighs about 36 tons. Zero MPG.
> > > > >
> > > > >
> > > > > Tom Eckert N2VWN
> > > > > 73 Glacier
> > > > > Oakland, TN
> > > >
> > > > _______________________________________________
> > > > GMCnet mailing list
> > > > Unsubscribe or Change List Options:
> > > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > > >
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > >
> >
> >
> >
> > --
> > Michael Beaton
> > 1977 Kingsley 26-11
> > 1977 Eleganza II 26-3
> > Antigonish, NS
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ray Erspamer
78 GMC Royale Center Kitchen
403, 3.70 Final Drive
Holley Sniper Quadrajet EFI System,
Holley Hyperspark Ignition System
414-484-9431
|
|
|
Re: [GMCnet] GM Floorplan furniture floor bolts [message #150427 is a reply to message #150421] |
Tue, 22 November 2011 09:39 |
gmcrv1
Messages: 839 Registered: August 2007 Location: Memphis
Karma: -1
|
Senior Member |
|
|
Mike,
Ditto!!!
Tom
On Tue, Nov 22, 2011 at 8:47 AM, Kingsley Coach <kingsleygmc@gmail.com>wrote:
> Tom
>
> I have many projects on the go!
> If I don't take on any new ones, I can have them All wrapped up by the time
> I'm 113...and after that, my time is free to explore other things of
> interest !
> So don't rush on my account.... <VBG>
>
> Mike
>
>
> On Tue, Nov 22, 2011 at 10:35 AM, Tom Eckert <gmcrv1@gmail.com> wrote:
>
> > Mike,
> >
> > Well, let's hope were talking about long range planning. It will take
> me a
> > while to get my GMC RTR (Ready to Roll). Actually, it will roll. nut the
> > interior is under refurb.
> >
> > Tom Eckert N2VWN
> > 73 Glacier
> > Oakland, TN
> >
> >
> > On Mon, Nov 21, 2011 at 11:31 PM, Kingsley Coach <kingsleygmc@gmail.com
> > >wrote:
> >
> > > Tom
> > >
> > > You've got me thinking...Where I'm going, I'd better make sure the air
> > > conditioning is working Very well ! <VBG>
> > >
> > > Mike...currently still on Earth
> > >
> > >
> > >
> > >
> > > On Mon, Nov 21, 2011 at 11:21 PM, Tom Eckert <gmcrv1@gmail.com> wrote:
> > >
> > > > Now I have to go back and read the entire article...
> > > >
> > > > Tom
> > > >
> > > > On Mon, Nov 21, 2011 at 10:35 AM, D C *Mac* Macdonald <
> > k2gkk@hotmail.com
> > > > >wrote:
> > > >
> > > > >
> > > > > I especially like the note at the end of the article:
> > > > >
> > > > > "A side note: In 1988, the brother, Raymond David Tse,
> > > > > was indicted on murder charges after admitting he fired
> > > > > 18 bullets at a gang member in his Chinatown office who
> > > > > was demanding protection money at gunpoint. Tse claimed
> > > > > self defense, and was acquitted in 1991."
> > > > >
> > > > > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> > > > > ~~ ~ D C "Mac" Macdonald ~ ~~
> > > > > ~ ~ Amateur Radio - K2GKK ~ ~
> > > > > ~ ~ USAF and FAA, Retired ~ ~
> > > > > ~ ~ ~ Oklahoma City, OK ~ ~ ~
> > > > > ~~ ~ ~ "The Money Pit" ~ ~ ~~
> > > > > ~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
> > > > > ~ www.gmcmhphotos.com/okclb ~
> > > > > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> > > > >
> > > > > Fathom the hypocrisy of a Congress
> > > > > that will require every citizen to
> > > > > prove that he or she has insurance
> > > > > but not require that each of those
> > > > > must prove he or she is a citizen!
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > > Date: Mon, 21 Nov 2011 08:52:24 -0600
> > > > > > From: gmcrv1@gmail.com
> > > > > > To: gmclist@temp.gmcnet.org
> > > > > > Subject: Re: [GMCnet] GM Floorplan furniture floor bolts
> > > > > >
> > > > > > Mike,
> > > > > >
> > > > > > Take it with you?
> > > > > >
> > > > > > How about like this...
> > > > > >
> > > > > > http://www.roadsideamerica.com/story/10560
> > > > > >
> > > > > > Being an old Mercedes guy, I actually went and saw this back in
> the
> > > > > 1980's.
> > > > > > Full size MB limo that weighs about 36 tons. Zero MPG.
> > > > > >
> > > > > >
> > > > > > Tom Eckert N2VWN
> > > > > > 73 Glacier
> > > > > > Oakland, TN
> > > > >
> > > > > _______________________________________________
> > > > > GMCnet mailing list
> > > > > Unsubscribe or Change List Options:
> > > > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > > > >
> > > > _______________________________________________
> > > > GMCnet mailing list
> > > > Unsubscribe or Change List Options:
> > > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > > >
> > >
> > >
> > >
> > > --
> > > Michael Beaton
> > > 1977 Kingsley 26-11
> > > 1977 Eleganza II 26-3
> > > Antigonish, NS
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
>
>
>
> --
> Michael Beaton
> 1977 Kingsley 26-11
> 1977 Eleganza II 26-3
> Antigonish, NS
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] GM Floorplan furniture floor bolts [message #150431 is a reply to message #150401] |
Tue, 22 November 2011 10:23 |
emerystora
Messages: 4442 Registered: January 2004
Karma: 13
|
Senior Member |
|
|
My 77 Kingsley came from the factory with two seat belts on the forward facing dinette and also seatbelts on the side facing couch.
Emery Stora
77Kingsley
Santa Fe, NM
On Nov 22, 2011, at 5:23 AM, Mike Miller wrote:
>
>
> jknezek wrote on Sun, 20 November 2011 14:57
>> Exactly what do the floorbolts on the GM floor plan (for ex a Glenbrook) tie into? ...
>>
>> ...
>> Given that the seats all have seatbelts, I can only assume they are supposed to bolt down into something in the floor besides plywood.
>
>
> The requirement for seatbelts was only on the FORWARD FACING seats. For most coaches that would be the cockpit seats and one half the dinette. GM provided anchor points at those locations and (most likely) no where else. Here are pictures of my 1973 from the last time this subject came up:
>
> <http://www.gmcmhphotos.com/photos/showphoto.php?photo=8276>
>
> If your coach has seatbelts at other locations, I would check to see how they are installed.... they might not be up to the task, and could be more of a danger than a help.
>
> --
> Mike Miller -- Hillsboro, OR -- on the Black list
> (#1)'73 26' exPainted D. -- (#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
> http://m000035.blogspot.com
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] GM Floorplan furniture floor bolts [message #150478 is a reply to message #150424] |
Tue, 22 November 2011 21:05 |
midlf
Messages: 2212 Registered: July 2007 Location: SE Wisc. (Palmyra)
Karma: 1
|
Senior Member |
|
|
Ray Erspamer wrote on Tue, 22 November 2011 09:14 | 113 ! I love it !!!
Last summer my son was home...........GMC was up on blocks, house kitchen is
torn apart, fireplace half installed in the living room, both workshops (garage
& basement) total disaster areas.......can't find one tool.....
He said "Dad, I think you need to start a few more projects"........
So sad by true.....I need to get organized !
Ray
|
Be careful - getting organized is a project in it's self!
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
|
|
|
Goto Forum:
Current Time: Sat Sep 21 21:35:52 CDT 2024
Total time taken to generate the page: 0.10253 seconds
|