Kohler 4kW Oil Question [message #147233] |
Thu, 20 October 2011 19:42 |
A Hamilto
Messages: 4508 Registered: April 2011
Karma: 39
|
Senior Member |
|
|
I looked in the MM and found the capacity, but couldn't find the spec for viscosity. Did I miss it?
What would be the recommended oil for my 1973 Kohler 4kW generator? Straight 30W or 10W-30 or other? HD? SG? SF? Anybody?
|
|
|
|
Re: [GMCnet] Kohler 4kW Oil Question [message #147420 is a reply to message #147233] |
Sat, 22 October 2011 19:25 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
Is that a single cylinder 4KW 1800RPM Kohler? My genset guy calls it a 'thumper'. 4 pole alternator. I got one in an old Itasca, I use straight 40w detergent.
Incidentally, if it's in a GMC, could you supply pictures of how it's mounted? I spent two beers this afternoon getting my Junkerac working reliably, and I'd really like to fit the Kohler instead.
Cure for the Junkerac? Simply unplug the wire to the overtemp and pressure switches. At some point I may get the upgraded 5PSI oil switch to replace the 10 PSI which isn't 'reliable'.
--johnny
________________________________
From: A. <markbb1@netzero.com>
To: gmclist@temp.gmcnet.org
Sent: Thursday, October 20, 2011 8:42 PM
Subject: [GMCnet] Kohler 4kW Oil Question
I looked in the MM and found the capacity, but couldn't find the spec for viscosity. Did I miss it?
What would be the recommended oil for my 1973 Kohler 4kW generator? Straight 30W or 10W-30 or other? HD? SG? SF? Anybody?
--
'73 23' CanyonLands
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
|
Re: [GMCnet] Kohler 4kW Oil Question [message #147466 is a reply to message #147445] |
Sun, 23 October 2011 04:58 |
|
mike miller
Messages: 3576 Registered: February 2004 Location: Hillsboro, Oregon
Karma: 0
|
Senior Member |
|
|
ahamilto wrote on Sat, 22 October 2011 19:48 | ... Apparently the 4kW Kohler was standard in some (all?) 1973 23' models. ...
|
While not '73's, both my 77 and 78 23 foot coaches have Onan's.
From what I have seen, most of the 23 foot coaches, regardless of year, came with 4kw Onan (Power Drawer) generators. Yes, I do know that some had other generators.
Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo'
http://m000035.blogspot.com
|
|
|
Re: [GMCnet] Kohler 4kW Oil Question [message #147557 is a reply to message #147445] |
Sun, 23 October 2011 18:35 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
Thanks, I think I got the books on it. Guy I got the SOB containing it from wanted to 'test' it so he put 12v dorect;y on the coil, toasting it >and< the current limiting resistor plus both relays on the smart board. I have most of that corrected, and propose to do the genset shuffle when the Junkerac dies. I favor four - pole gensets cos they usually run quieter.
--johnny
________________________________
From: A. <markbb1@netzero.com>
To: gmclist@temp.gmcnet.org
Sent: Saturday, October 22, 2011 10:48 PM
Subject: Re: [GMCnet] Kohler 4kW Oil Question
Johnny Bridges wrote on Sat, 22 October 2011 19:25
> Is that a single cylinder 4KW 1800RPM Kohler? My genset guy calls it a 'thumper'. 4 pole alternator. I got one in an old Itasca, I use straight 40w detergent.
> Incidentally, if it's in a GMC, could you supply pictures of how it's mounted? I spent two beers this afternoon getting my Junkerac working reliably, and I'd really like to fit the Kohler instead.
> Cure for the Junkerac? Simply unplug the wire to the overtemp and pressure switches. At some point I may get the upgraded 5PSI oil switch to replace the 10 PSI which isn't 'reliable'.
>
> --johnny
It is a single cylinder unit. Apparently the 4kW Kohler was standard in some (all?) 1973 23' models. I will see if I can round up a camera to take a picture or two. Check out pages 24C-52 through 24C-73 of MM X-7425 from http://www.bdub.net/manuals/X7425/index.html for almost everything you ever wanted to know about the Kohler 4kW.
--
'73 23' CanyonLands
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
Re: [GMCnet] Kohler 4kW Oil Question [message #147590 is a reply to message #147557] |
Sun, 23 October 2011 20:40 |
midlf
Messages: 2212 Registered: July 2007 Location: SE Wisc. (Palmyra)
Karma: 1
|
Senior Member |
|
|
Johnny Bridges wrote on Sun, 23 October 2011 18:35 | propose to do the genset shuffle when the Junkerac dies.
--johnny
|
"Junkerac" - Tell us how you really feel about your current gen. <GRIN>
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
|
|
|
Re: [GMCnet] Kohler 4kW Oil Question [message #147803 is a reply to message #147590] |
Tue, 25 October 2011 19:14 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
I'm gonna paint the thing Caterpillar Yellow, I betcha it will work then!
--johnny
________________________________
From: Steve Southworth <midlf@centurytel.net>
To: gmclist@temp.gmcnet.org
Sent: Sunday, October 23, 2011 9:40 PM
Subject: Re: [GMCnet] Kohler 4kW Oil Question
Johnny Bridges wrote on Sun, 23 October 2011 18:35
> propose to do the genset shuffle when the Junkerac dies.
>
> --johnny
>
"Junkerac" - Tell us how you really feel about your current gen. <GRIN>
--
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
Re: [GMCnet] Kohler 4kW Oil Question [message #147812 is a reply to message #147803] |
Tue, 25 October 2011 20:35 |
midlf
Messages: 2212 Registered: July 2007 Location: SE Wisc. (Palmyra)
Karma: 1
|
Senior Member |
|
|
Johnny Bridges wrote on Tue, 25 October 2011 19:14 | I'm gonna paint the thing Caterpillar Yellow, I betcha it will work then!
--johnny
|
If only it were that easy!
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
|
|
|
|
Re: Kohler 4kW Oil Question [message #147819 is a reply to message #147818] |
Tue, 25 October 2011 21:43 |
midlf
Messages: 2212 Registered: July 2007 Location: SE Wisc. (Palmyra)
Karma: 1
|
Senior Member |
|
|
JohnL455 wrote on Tue, 25 October 2011 21:35 | If I paint my 455 Cat yellow can I burn Diesel?
|
Only if you replace your spark plugs with some really really hot glow plugs! (GRIN - what a load of bs this is!!! But it's on the internet so it must be true!)
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
|
|
|
|