GMCforum: GMCnet » Ram Air System Redux

Home » Public Forums » GMCnet » Ram Air System Redux

Show: Today's Messages :: Polls :: Message Navigator

Ram Air System Redux [message #145654]

Wed, 05 October 2011 20:53

SThornbg

Messages: 127
Registered: September 2011

Karma: 0

Senior Member

I have seen a lot of comments in the archives re the ram air installations people have done, but I don't find any sketches or pictures to guide newbies along the way.

I am trying to put 4" water heater vent (flexible)on the stock air cleaner housing shorkle. The snorkle has the 4" flair at the end. I am not able to make the bend coming off of the snorkle due to the close proximity to a structural brace. I have tried a hard tin flex elbow and I have tried coming directly off the snorkle with the flexible vent. Neither way allows me to reset the air cleaner housing on the carburetor.

Any advice would be very much appreciated.......

Steve Thornburg
South Bend, IN
'77 Palm Beach 455

Steve Thornburg South Bend, IN 77 exPB 455 "Tinker Toy"

Report message to a moderator

Re: Ram Air System Redux [message #145658 is a reply to message #145654]

Wed, 05 October 2011 21:39

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

Steve, I am using 3 inch John Deere planter hose. It is plastic and bends around the bracing of the floor, actually going between them and out to the grille where I have my breather. Ken H. is the one who told me what to use when I needed to replace my old tubing, that was tearing because it was some kind of cloth. Not cheap. I paid about 70 bux for an 8 ft section.
Dan

3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer

Report message to a moderator

Re: [GMCnet] Ram Air System Redux [message #145659 is a reply to message #145654]

Wed, 05 October 2011 21:40

Mr ERFisher

Messages: 7117
Registered: August 2005

Karma: 2

Senior Member

how about this
http://goo.gl/s82I3

gene

On Wed, Oct 5, 2011 at 6:53 PM, SThornbg <SThornbg@aol.com> wrote:

>
>
> I have seen a lot of comments in the archives re the ram air installations
> people have done, but I don't find any sketches or pictures to guide newbies
> along the way.
>
> I am trying to put 4" water heater vent (flexible)on the stock air cleaner
> housing shorkle. The snorkle has the 4" flair at the end. I am not able to
> make the bend coming off of the snorkle due to the close proximity to a
> structural brace. I have tried a hard tin flex elbow and I have tried
> coming directly off the snorkle with the flexible vent. Neither way allows
> me to reset the air cleaner housing on the carburetor.
>
> Any advice would be very much appreciated.......
>
> Steve Thornburg
> South Bend, IN
> '77 Palm Beach 455
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Gene Fisher -- 74-23,77PB/ore/ca
�Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Ram Air System Redux [message #145679 is a reply to message #145659]

Thu, 06 October 2011 03:15

spiffycar

Messages: 133
Registered: May 2010
Location: Brook Park ,Ohio

Karma: 1

Senior Member

Early 90's dodge trucks used 3" & 4" hard plastic flex air tubes that work well as replacements or for custom installs.

http://www.gmcmhphotos.com/photos/showphoto.php?photo=41016&title=dodge-truck-snorkels-&cat=5915

Paul W L
76 Daytona Beach! ( EX-Palm Beach )
Cleveland,OH
& Current Card Carrying Pull A Part VIP Member

Report message to a moderator

Re: Ram Air System Redux [message #145683 is a reply to message #145658]

Thu, 06 October 2011 06:12

John Sharpe

Messages: 489
Registered: February 2006
Location: Texas

Karma: 1

Senior Member

Quote:

... I am using 3 inch John Deere planter hose....

Dan, What color is it? Green would clash with the blue on my olds! Laughing

John Sharpe
Humble,TX
'78 Eleganza TBI
'89 Spectrum 2000 MPI V-10
'40 Ford Panel Delivery TPI
johnasharpe@gmail.com

Report message to a moderator

Re: Ram Air System Redux [message #145684 is a reply to message #145654]

Thu, 06 October 2011 07:10

Hardie Johnson

Messages: 483
Registered: January 2004
Location: Raleigh NC

Karma: 0

Senior Member

SThornbg wrote on Wed, 05 October 2011 21:53

<>I am trying to put 4" water heater vent (flexible)on the stock air cleaner housing shorkle.<>Any advice would be very much appreciated.......
Steve Thornburg
South Bend, IN
'77 Palm Beach 455

If you are thinking that flexible dryer duct material or gas heater vent, it will likely collapse when you open the throttle.
The goal here is not so much ram air as getting a cool charge to the engine. The Jeep snorkle and a remote air cleaner seems to be the way to go.
Just ducting some cooler air to the area of the air intake would help.

Hardie Johnson "Crashj"
1973 26 foot Glacier, White Thing
Raleigh NC

Report message to a moderator

Re: Ram Air System Redux [message #145726 is a reply to message #145683]

Thu, 06 October 2011 13:45

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

John Sharpe wrote on Thu, 06 October 2011 06:12

Quote:

... I am using 3 inch John Deere planter hose....

Dan, What color is it? Green would clash with the blue on my olds! Laughing

Chuckle, Chuckle.
dan

Report message to a moderator

Previous Topic:	GMCWS 'Survivor II' Rally Day 5 photos
Next Topic:	Jerry Lee's GMC fire

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 16 13:04:44 CST 2024

Total time taken to generate the page: 0.00762 seconds