Home » Public Forums » GMCnet » Pick-n-Pull -- half off sale this week end.
| Pick-n-Pull -- half off sale this week end. [message #142223] |
Sat, 03 September 2011 08:26  |
 |
mike miller
Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon
Karma: 0
|
Senior Member |
|
|
It snuck up on me this time and I almost missed it!
<http://www.picknpull.com/events_and_specials.aspx?View=Detail&ID=2891>
This Friday(yesterday) Sat/Sun/Mon.
I'll be going thru a few of the portland area yards. Anyone want me to look for anything? (I am not REALLY interested in pulling motors or the like.... )
You can check inventory (just what cars are on the lot) on the website. <http://www.picknpull.com/check_inventory.aspx> (My zip is 97124)
As for delivery, in a few weeks, I am going to AZ and southern Cali before the TI rally. (Smaller items, as it is a month long trip.)
Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo'
http://m000035.blogspot.com
|
|
|
|
|
|
| Re: [GMCnet] Pick-n-Pull -- half off sale this week end. [message #142236 is a reply to message #142223] |
Sat, 03 September 2011 09:45  |
James Hupy
Messages: 6806
Registered: May 2010
Karma: -62
|
Senior Member |
|
|
Mike, look for Olds 350 and 307 Alternator adjusting brackets. They will
work without modification on the 403 Olds and with some slight mods the 455
also. I will buy all you find.
Jim Hupy
Salem, OR
78 GMC Roayle 403
On Sat, Sep 3, 2011 at 6:26 AM, Mike Miller <m000035@gmail.com> wrote:
>
>
> It snuck up on me this time and I almost missed it!
>
> <http://www.picknpull.com/events_and_specials.aspx?View=Detail&ID=2891>
>
> This Friday(yesterday) Sat/Sun/Mon.
>
> I'll be going thru a few of the portland area yards. Anyone want me to
> look for anything? (I am not REALLY interested in pulling motors or the
> like.... )
>
> You can check inventory (just what cars are on the lot) on the website. <
> http://www.picknpull.com/check_inventory.aspx> (My zip is 97124)
>
> As for delivery, in a few weeks, I am going to AZ and southern Cali before
> the TI rally. (Smaller items, as it is a month long trip.)
> --
> Mike Miller -- Hillsboro, OR -- on the Black list
> (#1)'73 26' exPainted D. -- (#2)`78 23' Birchaven Rear Bath -- (#3)`77 23'
> Birchaven Side Bath
> http://m000035.blogspot.com
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Pick-n-Pull -- half off sale this week end. [message #142248 is a reply to message #142236] |
Sat, 03 September 2011 11:23 |
|
mike miller
Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon
Karma: 0
|
Senior Member |
|
|
| ahamilto wrote on Sat, 03 September 2011 07:44 |
| Mike Miller wrote on Sat, 03 September 2011 08:26 |
It snuck up on me this time and I almost missed it!
...
|
I still need a JC-4 vacuum pump of a gm k-series diesel pickup and a wiper motor off a 90-96 Chevrolet Lumina APV / Olds Silhouette / Pontiac TranSport.
|
I do not think there are any JC-4 pumps... But I should be able to get the wiper motor. Getting to you in the south might not be worth it.
| James Hupy wrote on Sat, 03 September 2011 07:45 |
Mike, look for Olds 350 and 307 Alternator adjusting brackets. They will
work without modification on the 403 Olds and with some slight mods the 455
also. I will buy all you find.
|
I'll look, but I'll keep the first one!
Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo'
http://m000035.blogspot.com
|
|
|
|
| Re: [GMCnet] Pick-n-Pull -- half off sale this week end. [message #142256 is a reply to message #142248] |
Sat, 03 September 2011 12:50 |
James Hupy
Messages: 6806
Registered: May 2010
Karma: -62
|
Senior Member |
|
|
Mike, works for me! Thanks for looking.
Jim Hupy
On Sat, Sep 3, 2011 at 9:23 AM, Mike Miller <m000035@gmail.com> wrote:
>
>
> ahamilto wrote on Sat, 03 September 2011 07:44
> > Mike Miller wrote on Sat, 03 September 2011 08:26
> > > It snuck up on me this time and I almost missed it!
> > > ...
> > I still need a JC-4 vacuum pump of a gm k-series diesel pickup and a
> wiper motor off a 90-96 Chevrolet Lumina APV / Olds Silhouette / Pontiac
> TranSport.
>
>
> I do not think there are any JC-4 pumps... But I should be able to get the
> wiper motor. Getting to you in the south might not be worth it.
>
> James Hupy wrote on Sat, 03 September 2011 07:45
> > Mike, look for Olds 350 and 307 Alternator adjusting brackets. They will
> > work without modification on the 403 Olds and with some slight mods the
> 455
> > also. I will buy all you find.
>
>
> I'll look, but I'll keep the first one!
> --
> Mike Miller -- Hillsboro, OR -- on the Black list
> (#1)'73 26' exPainted D. -- (#2)`78 23' Birchaven Rear Bath -- (#3)`77 23'
> Birchaven Side Bath
> http://m000035.blogspot.com
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: Pick-n-Pull -- half off sale this week end. [message #142271 is a reply to message #142223] |
Sat, 03 September 2011 16:22 |
GeorgeRud
Messages: 1380
Registered: February 2007
Location: Chicago, IL
Karma: 0
|
Senior Member |
|
|
From other postings, you might want to check for pre-1988 steel GM dually wheels. There seems to be a lot of people looking for these, but they are too heavy to ship economically.
George Rudawsky
Chicago, IL
75 Palm Beach
|
|
|
|
| Re: [GMCnet] Pick-n-Pull -- half off sale this week end. [message #142284 is a reply to message #142248] |
Sat, 03 September 2011 18:49 |
Len Novak
Messages: 676
Registered: February 2004
Location: Las Vegas, NV
Karma: -3
|
Senior Member |
|
|
Those wiper motors are plentiful here
Len and Pat
78 Kingsley, The Beast II with dash lights that work
Fallbrook, CA
http://www.gmcmhphotos.com/photos/showgallery.php?cat=4375
www.bdub.net/novak/
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Mike Miller
Sent: Saturday, September 03, 2011 9:24 AM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] Pick-n-Pull -- half off sale this week end.
ahamilto wrote on Sat, 03 September 2011 07:44
> Mike Miller wrote on Sat, 03 September 2011 08:26
> > It snuck up on me this time and I almost missed it!
> > ...
> I still need a JC-4 vacuum pump of a gm k-series diesel pickup and a wiper
motor off a 90-96 Chevrolet Lumina APV / Olds Silhouette / Pontiac
TranSport.
I do not think there are any JC-4 pumps... But I should be able to get the
wiper motor. Getting to you in the south might not be worth it.
James Hupy wrote on Sat, 03 September 2011 07:45
> Mike, look for Olds 350 and 307 Alternator adjusting brackets. They will
> work without modification on the 403 Olds and with some slight mods the
455
> also. I will buy all you find.
I'll look, but I'll keep the first one!
--
Mike Miller -- Hillsboro, OR -- on the Black list
(#1)'73 26' exPainted D. -- (#2)`78 23' Birchaven Rear Bath -- (#3)`77 23'
Birchaven Side Bath
http://m000035.blogspot.com
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Len and Pat Novak
1978 GMC Kingsley
The Beast II with dash lights that work and labels you can see!
Las Vegas, NV new email: B52sRule@Gmail.com
http://www.gmcmhphotos.com/photos/showgallery.php?cat=4375
www.bdub.net/novak/
|
|
|
|
| Re: [GMCnet] Pick-n-Pull -- half off sale this week end. [message #142296 is a reply to message #142284] |
Sat, 03 September 2011 20:36 |
stick miller
Messages: 1036
Registered: March 2010
Location: Americus, Georgia
Karma: 0
|
Senior Member |
|
|
Somebody needs to put the needed parts on a spreadsheet. I'm here in Panama City with cloudy weather, a few tools and a Men's mall 11 miles from me. Bored out of my mind, but not bored enough to pull a bunch of stuff nobody wants.
Stick Miller
'78 Royale - "White Trash" - she left me for another man
'76 Eleganza - "Cousin Eddie" Sold
'84 Bluebird Wanderlodge - "Past Tents"
Americus, GA
|
|
|
|
|
|
| Re: [GMCnet] Pick-n-Pull -- half off sale this week end. [message #142321 is a reply to message #142302] |
Sat, 03 September 2011 22:43 |
|
mike miller
Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon
Karma: 0
|
Senior Member |
|
|
| ahamilto wrote on Sat, 03 September 2011 19:09 |
.. If the cost of the part is $30 or more, don't buy it.
|
I try and pick "trading stock" during a half off sale. I'll see what I can do...
The normal cost at Pick-n-Pull is 19.99 plus 0.99 core charge.
I was looking through my parts to get started on my next project, and noticed that I already have two of the motors. Both already have been tested good.
Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo'
http://m000035.blogspot.com
|
|
|
|
|
|
| Re: [GMCnet] Pick-n-Pull -- half off sale this week end. [message #142338 is a reply to message #142334] |
Sun, 04 September 2011 00:50 |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Paul,
I just went to the Forum Swap Meet and did a search for:
1) "Wanted" = Results 1 - 10 of about 71,700 from gmc.mybirdfeeder.net for wanted
2) "WTB" = Results 1 - 10 of about 2,780 from gmc.mybirdfeeder.net for wtb
I reckon if someone wants something that's the place to put it with the subject title of "Wanted - WTB" followed by whatever they
are looking for. The "wantor" should list the price he expects to pay and what he is willing to pay to ship it. If and when the
"wantor" gets the item he should go back into the message and note that he has gotten it.
A person heading to the Men's Mall could do a search and if he finds something he's willing to try and get contact the "wantor" to
verify he still needs the part and confirm what he's willing to spend.
I know that most of you are going to think this is silly because we're all Mates, BUT here's what happened to me at the Santa Rosa
GMCMI Convention.
I went to the swap meet and found a guy selling a bunch of stuff. One of the items was an OEM master cylinder housing. I figger'd
that would be a good thing to have for The Blue Streak. I picked it up and noticed that there was a rag stuck in the bore. I asked
if the bore was in good shape and was told "perfect, that's why I stuck a rag in there to protect it." I didn't want to question a
nice, grey haired, honest faced old GMCer so I paid him the $15 he wanted. I didn't even barter.
When I got it back to my motel I pulled the rag out and the bore was SERIOUSLY CORRODED!
The next day I showed it to the nice old grey haired GMCer and noted that he must have inadvertently made a mistake. He put his
glasses on, looked at the bore and said; "gee, you're right." He then went to hand it back to me and I told him as far as I was
concerned it wasn't repairable and asked for my $15 back. He refused and said; you can use it as a core when you buy a rebuilt one.
I realized that this guy was a shyster so I took it back and said no more. As I walked out there was a trash barrel and I tossed it
in and that was that. Needless to say I realized that not ALL GMCer's are honorable people!
Regards,
Rob M.
-----Original Message-----
From: Paul W Lehmann
Quote:
> Somebody needs to put the needed parts on a spreadsheet
Halle...F&%#en...lujah!!!! :o
--
Paul
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
|
|
| Re: [GMCnet] Pick-n-Pull -- half off sale this week end. [message #142385 is a reply to message #142369] |
Sun, 04 September 2011 18:43 |
|
mike miller
Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon
Karma: 0
|
Senior Member |
|
|
| ahamilto wrote on Sun, 04 September 2011 11:38 |
... The kit I am hoping to one day buy from Ken Henderson does not come with the 5-pin connector to the motor. Do the motors you have come with the connectors, or do I still need to ask you to get a connector from the Men's Mall?
|
If you are going to the Men's Mall to get the connector, why not get the motor at the same time?
I got five of them today.... motors WITH connectors. (I always get the connector and as much wire as I can.) I also pulled the left wiper arm.
Besides the wiper motors and arms, today I picked up:
-- 4 of 3 types of "GMC" emblems
-- two "old style" vacuum pumps (not tested yet)
-- a pair of new style taillights (need to be cleaned up)
-- two flip down license holders (to hide macator switches and water/electric connections.)
-- A pair of Dodge pick-up power mirrors with control switch from Dodge mini van. (I think they can mate them to the OEM brackets.)
-- Two plastic latches that MIGHT be what Stick was looking for. (From Mercury Mountaineer, they are dirty and I suspect the wrong color.)
-- A front sidelight from a '77 Hornet that MIGHT work for Bert. (It looks to be the same size but does NOT have the metal trim around the light and the corners are slightly rounded. I think it would look better than OEM on coaches that have had the rib strip removed.)
-- A pair of front blinker lights from a 97 GMC heavy duty van that look like they will mount nicely in the OEM grill. (Freeing up the space under the headlights for fog or driving lights.)
Total price, with 7 core charges: $152.10
Took me 8 hours round trip from the house.
There was a Seville with port fuel injected Olds v8 engine. I thought about pulling all the parts to install it on my 403... but was just to tired.
I'll post a picture or two soon.
Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo'
http://m000035.blogspot.com
|
|
|
|
| Re: [GMCnet] Pick-n-Pull -- half off sale this week end. [message #142387 is a reply to message #142385] |
Sun, 04 September 2011 18:58 |
A Hamilto
Messages: 4508
Registered: April 2011
Karma: 39
|
Senior Member |
|
|
| Mike Miller wrote on Sun, 04 September 2011 18:43 |
If you are going to the Men's Mall to get the connector, why not get the motor at the same time?
I got five of them today.... motors WITH connectors. (I always get the connector and as much wire as I can.) I also pulled the left wiper arm.
Besides the wiper motors and arms, today I picked up:
-- two "old style" vacuum pumps (not tested yet)
|
You da man!
Can the "old style" vacuum pumps be installed to provide vacuum to the brake booster if the engine quits the same as the JC-4 model will? If so, is one or more of the ones you picked today for sale? Where can I find instructions for installing it?
[Updated on: Sun, 04 September 2011 19:29] Report message to a moderator |
|
|
|
| Re: [GMCnet] Pick-n-Pull -- half off sale this week end. [message #142395 is a reply to message #142387] |
Sun, 04 September 2011 20:38 |
|
mike miller
Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon
Karma: 0
|
Senior Member |
|
|
| ahamilto wrote on Sun, 04 September 2011 16:58 |
...Can the "old style" vacuum pumps be installed to provide vacuum to the brake booster if the engine quits the same as the JC-4 model will? If so, is one or more of the ones you picked today for sale? Where can I find instructions for installing it?
|
Yes, maybe and here:
<http://www.gmcmhphotos.com/photos/showphoto.php?photo=4668&cat=3471>
<http://www.gmcmhphotos.com/photos/showgallery.php?cat=5783>
<http://www.gmcmhphotos.com/photos/showgallery.php?cat=5783>
The maybe is that I haven't tested them yet. I did blow into them at the pick-n-pull before paying for them, but will need to put power to them. Both are dirty and a bit rusty, but I haven't seen ANY in the yard before so I snatched them up.
BUT....
The project that I had planned for this weekend will come first. New brake booster, replace the old rubber brake lines with JimB's stainless flex brake lines, Vacuum pump (JC4, but as I haven't found a decent electrical connector, maybe... ) and a FULL FLUSH of the brake system with a power bleeder made with Jim H's plate.
I already lost a day....
Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo'
http://m000035.blogspot.com
|
|
|
|
|
|
|
|
Goto Forum:
Current Time: Fri Oct 25 18:31:01 CDT 2024
Total time taken to generate the page: 0.03619 seconds
|
GMCforum
Search
Help
Register
Login
Home
