GMCforum: GMCnet » [GMCnet] Spin on transmission filter

Home » Public Forums » GMCnet » [GMCnet] Spin on transmission filter

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Spin on transmission filter [message #142170]

Fri, 02 September 2011 19:32

Kirk

Messages: 80
Registered: April 2008

Karma: 0

Member

I'll try again. The filter base nipple dimension should have read; 3/4" X
20 TPI

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Kirk & Eloise Yeager - Motorcyclists/RVers/Dog Lovers - 77 Royale 455/TBI/3:55 - 49ers - N. Nevada - NdnKirk at Gmail dot com

Report message to a moderator

Re: [GMCnet] Spin on transmission filter [message #142193 is a reply to message #142170]

Fri, 02 September 2011 21:42

Russell Mehlenbacher

Messages: 128
Registered: June 2010

Karma: 1

Senior Member

Came across fine as email, now the forum knows.
I find that I have a Fram P3317, 5/8 - 18. I thought I read that it is a 10
micron filter, but can't find that ref. right now.

On Fri, Sep 2, 2011 at 8:32 PM, Kirk <ndnkirk@gmail.com> wrote:

> I'll try again. The filter base nipple dimension should have read; 3/4" X
> 20 TPI
>
>

--
Russ & Linda Mehlenbacher
Rochester Hills, MI
'74 X-Sequoia
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Russ & Linda Mehlenbacher
Rochester Hills, Michigan
'76 Eleganza
'74 Sequoia

Report message to a moderator

Previous Topic:	New windshield Installations at the GMCMI rally
Next Topic:	[GMCnet] Winter Cover

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Oct 27 14:32:21 CDT 2024

Total time taken to generate the page: 0.01113 seconds