80mm Calipers [message #138913] |
Sat, 13 August 2011 17:24 |
LYNN L
Messages: 140 Registered: March 2005 Location: Pearland TX.
Karma: 0
|
Senior Member |
|
|
Anyone got the part numbers for the 80mm calipers. The GMC motorhome information website is down. Sure hope they get it back up as that is my parts directory. Looking at the rockauto website I"m guessing that #184123 and 184122 might be the ones.
Thanks Lynn Sr.
Lynn L
76 Eleganza Cad.500
Pearland TX.
[Updated on: Sat, 13 August 2011 17:25] Report message to a moderator
|
|
|
Re: [GMCnet] 80mm Calipers [message #138928 is a reply to message #138913] |
Sat, 13 August 2011 18:53 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
This spreadsheet is almost 9 years old so a lot of the P/N's, and certainly
the prices, have changed, but most of the application references are there:
http://www.gmcmhphotos.com/photos/showgallery.php?cat=3272
Ken H.
Americus, GA
'76 X-Birchaven w/Cad500/Howell EFI+ & EBL
www.gmcwipersetc.com
On Sat, Aug 13, 2011 at 6:24 PM, LYNN LAYCOCK <lynn_sr@msn.com> wrote:
>
>
> Anyone got the part numbers for the 80mm calipers. The GMC motorhome
> information website is down. Sure hope they get it back up as that is my
> parts directory. Looking a the rockauto website I"M guessing that #184123
> and 184122 might be the ones.
> Thanks Lynn Sr.
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
Re: [GMCnet] 80mm Calipers [message #138955 is a reply to message #138913] |
Sat, 13 August 2011 21:02 |
powerjon
Messages: 2446 Registered: January 2004
Karma: 5
|
Senior Member |
|
|
IF you have an autozone close then go and ask for a C530, alternate
part no. 90185 and for the left is a c531, alternate part no 90184.
If you want to install them here is the process.
http://www.gmcmotorhome.com/commodore/front_brake/index.html
J.R. Wright
GMC GreatLaker
78 Buskirk 30' Stretch
1975 Avion (Under Reconstruction)
Michigan
>
>
> Anyone got the part numbers for the 80mm calipers. The GMC motorhome
> information website is down. Sure hope they get it back up as that
> is my parts directory. Looking a the rockauto website I"M guessing
> that #184123 and 184122 might be the ones.
> Thanks Lynn Sr.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
J.R. Wright
GMC GreatLaker
GMC Eastern States
GMCMI
78 30' Buskirk Stretch
75 Avion Under Reconstruction
Michigan
|
|
|
Re: [GMCnet] 80mm Calipers [message #138962 is a reply to message #138936] |
Sat, 13 August 2011 21:32 |
LYNN L
Messages: 140 Registered: March 2005 Location: Pearland TX.
Karma: 0
|
Senior Member |
|
|
Thanks Ken,Thats the list I was searching for. I already have converted to discs but with the hhydroboost and low pedal problems finally solved I"m going to move up to the 80 mm. on the mid bogies. It will work out well with the true tracks that are being installed. Here below Houston the temp. has been over 100 for 22 days or so. I"m moving rather slowly on this install. Have to come in and cool down. Hey Rob, thanks for the invite. I"m already am a member. Stay cool in Australia..
Lynn L
76 Eleganza Cad.500
Pearland TX.
[Updated on: Sat, 13 August 2011 21:33] Report message to a moderator
|
|
|
Re: [GMCnet] 80mm Calipers [message #138965 is a reply to message #138955] |
Sat, 13 August 2011 21:40 |
LYNN L
Messages: 140 Registered: March 2005 Location: Pearland TX.
Karma: 0
|
Senior Member |
|
|
JR, according to the old spread sheet you are right on that#.I remembered the jb7 on the suburban so the Rockauto numbers were good. look like 82 to 87 are all the same. The cores have gone up in value so they are probably getting scarce.
Thanks Lynn SR.
Lynn L
76 Eleganza Cad.500
Pearland TX.
|
|
|
Re: [GMCnet] 80mm Calipers [message #138968 is a reply to message #138962] |
Sat, 13 August 2011 21:51 |
John Sharpe
Messages: 489 Registered: February 2006 Location: Texas
Karma: 1
|
Senior Member |
|
|
Quote: | ..... Here below Houston the temp. has been over 100 for 22 days or so. .....
|
Lynn, I'm feeling your pain. Where are you located? Not may of us in the Houston area. Maybe we could get together for a chat. I would like to discuss you hydroboost as that's what I would like to add to mine.
John Sharpe
Humble,TX
'78 Eleganza TBI
'89 Spectrum 2000 MPI V-10
'40 Ford Panel Delivery TPI
johnasharpe@gmail.com
|
|
|
Re: [GMCnet] 80mm Calipers [message #138985 is a reply to message #138968] |
Sat, 13 August 2011 23:30 |
hal kading
Messages: 642 Registered: February 2004 Location: Las Cruces NM
Karma: 4
|
Senior Member |
|
|
John,
I see that Jim K. is showing a hydro-boost kit on the Applied Website. Anyone know anything about it?
Hal Kading 78 Buskirk Las Cruces NM
|
|
|