| [GMCnet] Front end components available or west coast pick up [message #135856] |
Sun, 24 July 2011 16:28 |
glwgmc
Messages: 1014
Registered: June 2004
Karma: 10
|
Senior Member |
|
|
Hi all,
With the retrofit of the 1 ton front end I now have the original front end components available for a west coast pick up. The lower A arms will go back to Manny to make more kits. I will be selling the axles with fairly new inner and outer CV joints, good boots and the correct axle nut for $100 each. The hub, knuckle and brake assembly with good bearings and almost new yellow brake pads will also be $100 each. I really don't want to box these things for shipping so would much prefer a local pickup. We are about 500 miles north of the Bay Area and 500 miles south of the Canadian border. Our building is right on US-199 that connects the I-5 at Grants Pass, OR, with US-101 at Crescent City, CA. We are just past mile post 26. It is a good road trip for those on the west coast with lots to see and do in this part of the country. We are about an hour from the Redwood National and State Parks and the ocean, 20 miles from the Oregon Caves NM and a couple of hours from Crater
Lake NP. If you like fine woodworking I think you will enjoy our studio and gallery. Can't beat the weather this time of year, either. Let me know by email off line or by phone if you are interested.
Jerry
Jerry Work
The Dovetail Joint
Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR
Visitors always welcome!
glwork@mac.com
http://jerrywork.com
541-592-5360
Founder of the Southern Oregon Guild
www.southernoregonguild.org
Member of the Siskiyou Guild
www.siskiyouguild.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jerry & Sharon Work
78 Royale
Kerby, OR
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
