Home » Public Forums » GMCnet » Wheat GMC concept revisited
| Wheat GMC concept revisited [message #131973] |
Sat, 25 June 2011 12:53  |
hertfordnc
Messages: 1164
Registered: September 2009
Location: East NC
Karma: 0
|
Senior Member |
|
|
The earlier thread discussing the Wheat GMC and other scams got me thinking;
Do the molds and whatnot still exist? Could it be done? If so, what would it look like?
What drive train?
There isn't a modern FWD combination big enough, correct?
Would you then go with a modified 4WD setup, like the second generation Revcon?
Could you take some weight off the original design? And then use a diesel and really gain some MPG?
Imagine if everything the Jim's amd others have learned and developed were incorporated into a new design.
And could it be done for, say, $120,000?
Dave & Ellen Silva
Hertford, NC
76 Birchaven, 1-ton and other stuff
Currently planning the Great american Road Trip Summer 2021
It's gonna take a lot of Adderall to get this thing right.
|
|
|
|
| Re: [GMCnet] Wheat GMC concept revisited [message #131976 is a reply to message #131973] |
Sat, 25 June 2011 13:30  |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
There some molds all around the country, but the condition and size of
them is another.
I believe Jim B knows where some are and others.
Wheet was going to use the same ones.
On Sat, Jun 25, 2011 at 10:53 AM, dave silva <admin@oldrv.net> wrote:
>
>
> The earlier thread discussing the Wheat GMC and other scams got me thinking;
>
> Do the molds and whatnot still exist? Could it be done? If so, what would it look like?
>
> What drive train?
>
> There isn't a modern FWD combination big enough, correct?
>
> Would you then go with a modified 4WD setup, like the second generation Revcon?
>
> Could you take some weight off the original design? And then use a diesel and really gain some MPG?
>
> Imagine if everything the Jim's amd others have learned and developed were incorporated into a new design.
>
> And could it be done for, say, $120,000?
>
>
> --
> Dave & Ellen Silva
>
>
> Check out the website:
>
> http://www.oldrv.net
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: Wheat GMC concept revisited [message #131978 is a reply to message #131973] |
Sat, 25 June 2011 14:31 |
JohnL455
Messages: 4447
Registered: October 2006
Location: Woodstock, IL
Karma: 12
|
Senior Member |
|
|
I saw the 2 mold halves for the front clip at Golby about 10 years ago. The problem is the jig to hold them and all the equipment to run the machinery is massive and unless someone was in that business and has access, it's got to be cost prohibitive.
John Lebetski
Woodstock, IL
77 Eleganza II
|
|
|
|
|
|
| Re: Wheat GMC concept revisited [message #131981 is a reply to message #131973] |
Sat, 25 June 2011 14:45 |
Chr$
Messages: 2690
Registered: January 2004
Location: Scottsdale, AZ
Karma: 1
|
Senior Member |
|
|
The workhorse FWD chassis would be a good candidate, that is what Jim B has used, but at like $60K a copy, by the time you get the coach built, you are looking at $200K. At that point, we have the new Monaco Vesta, which is built wholly by Monaco (except the engine and tranny) like the GMC was sorta built wholly by GM. It is all metal and FRP (or SMC) and all the systems are engineered by the same folks to work together. Sorta like a Mac vs a PC, it should just work better.
I think that is the direction these things are going, and with that out there, other than the current funky styling, why would I want a New GMC that doesn't have much room. The Vesta is a RWD Diesel Puller if I recall, and the article in FMC stated it was pretty quiet and had no heat from the engine room.
I love my GMC, but We will outgrow the thing when we start spending part of the year in her. That's a long way off, and then maybe a nice gently used Vesta would fit nicely next to my GMC.
-Chr$: Perpetual SmartAss
Scottsdale, AZ
77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
|
|
|
|
|
|
|
|
| Re: [GMCnet] Wheat GMC concept revisited [message #131996 is a reply to message #131993] |
Sat, 25 June 2011 18:11 |
 |
jaholland
Messages: 565
Registered: June 2010
Location: Sweet Home Alebamy
Karma: 0
|
Senior Member |
|
|
Back in the early 90's we toured the Explorer Van Company on U S 30 W in Warsaw Indiana ~
They had an assembly line set up just for the GMC Motorhomes `
As I remember it was Frame Up Restorations ~
powder Blast The Frames , they had body molds, new 455's, new 425's and new wiring ~
I loved those Explorer Leather Seats, 6 way Leather driver & Passenger seats ~
The Power Leather dinette seats and the rear leather gucho seats were electricly controlled
and would fold down~ at the push of a button by the seat or by the dash panel
They also had an optional double front 3-way passenger seat that would raise up 6"
and the folded over seat back would flip up as the couch lifted and stertch into a full size bed ~
~ Joe ~
/_]*[__][] *[__|] ~ * '73 TZE063V101887 "
"
O----------OO--]* ~ '78 TZE168V100234 "
"
" Joe & Lavelle " "
"
'sweet home alebamy'
[Updated on: Sat, 25 June 2011 18:21] Report message to a moderator |
|
|
|
|
|
|
|
| Re: [GMCnet] Wheat GMC concept revisited [message #132010 is a reply to message #131973] |
Sat, 25 June 2011 19:56 |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Dave,
It would cost more than $120,000 just to file all the paperwork with the
DOT, EPA, and every other bloody US Government agency!
Regards,
Rob M.
Sydney, Australia
AUS '75 Avion-The Blue Streak TZE365V100428
USA '75 Avion-Double Trouble TZE365V100426
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of dave silva
Sent: Sunday, 26 June 2011 3:53 AM
To: gmclist@temp.gmcnet.org
Subject: [GMCnet] Wheat GMC concept revisited
The earlier thread discussing the Wheat GMC and other scams got me thinking;
Do the molds and whatnot still exist? Could it be done? If so, what would
it look like?
What drive train?
There isn't a modern FWD combination big enough, correct?
Would you then go with a modified 4WD setup, like the second generation
Revcon?
Could you take some weight off the original design? And then use a diesel
and really gain some MPG?
Imagine if everything the Jim's amd others have learned and developed were
incorporated into a new design.
And could it be done for, say, $120,000?
--
Dave & Ellen Silva
Check out the website:
http://www.oldrv.net
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
| Re: [GMCnet] Wheat GMC concept revisited [message #132011 is a reply to message #132001] |
Sat, 25 June 2011 19:59 |
|
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Carl,
Well spotted! $750,000!
I want some of whatever drugs Don Wheat is on! ;-)
Regards,
Rob M.
Sydney, Australia
AUS '75 Avion-The Blue Streak TZE365V100428
USA '75 Avion-Double Trouble TZE365V100426
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of noi
Sent: Sunday, 26 June 2011 9:47 AM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] Wheat GMC concept revisited
Greetings:
I found the following post on this web site some time back - Not sure if it
is the same company or person, but interesting though.
Select GMC Motorhome and it is the last listing
http://www.alaskancamper.com/photoads/viewads.html
Carl P.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
| Re: Wheat GMC concept revisited [message #132012 is a reply to message #132001] |
Sat, 25 June 2011 20:01 |
idrob
Messages: 645
Registered: January 2005
Location: Central Idaho
Karma: 0
|
Senior Member |
|
|
| noi wrote on Sat, 25 June 2011 16:47 |
Greetings:
I found the following post on this web site some time back - Not sure if it is the same company or person, but interesting though.
Select GMC Motorhome and it is the last listing
http://www.alaskancamper.com/photoads/viewads.html
Carl P.
|
I just responded to another post on the Wheat GMC project. Yes, now that I see the name of the camper, it was alaskancamper that Don owned at the time I met him. BTW, I also recall he said he lost a good deal of his own money in the project, I think he said in excess of a million dollars, but my memory is fuzzy on that.
Rob Allen
former owner of '76 x-PB
|
|
|
|
| Re: [GMCnet] Wheat GMC concept revisited [message #132014 is a reply to message #131996] |
Sat, 25 June 2011 20:02 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
On Sat, Jun 25, 2011 at 4:11 PM, J A Holland <acts238bishop@yahoo.com> wrote:
>
>
> Back in the early 90's we toured the Explorer Van Company on U S 30 W in Warsaw Indiana ~
> They had an assembly line set up just for the GMC Motorhomes `
> As I remember it was Frame Up Restorations ~
> powder Blast The Frames , they had body molds, new 455's, new 425's
> new wiring ~
> I loved those Explorer Leather Seats, 6 way Leather driver & Passenger seats ~
> The Power Leather dinette seats and the rear leather gucho seats were button controlled ~
>
> ~ Joe ~
> --
> /_][__][] [__|] - 1978 GMC 403 ""
> O----------OO-* Eleganza II ""
> " Joe & Lavelle " ""
> 'sweet home alebamy'
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Wheat GMC concept revisited [message #132016 is a reply to message #132014] |
Sat, 25 June 2011 20:06 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Joe,
I have a hard time believing those engines were new. They must have
been rebuilt. Also the transmission. There is a distinction between
new and rebuilt.
On Sat, Jun 25, 2011 at 6:02 PM, Jim Kanomata <jimkanomata@gmail.com> wrote:
> On Sat, Jun 25, 2011 at 4:11 PM, J A Holland <acts238bishop@yahoo.com> wrote:
>>
>>
>> Back in the early 90's we toured the Explorer Van Company on U S 30 W in Warsaw Indiana ~
>> They had an assembly line set up just for the GMC Motorhomes `
>> As I remember it was Frame Up Restorations ~
>> powder Blast The Frames , they had body molds, new 455's, new 425's
>> new wiring ~
>> I loved those Explorer Leather Seats, 6 way Leather driver & Passenger seats ~
>> The Power Leather dinette seats and the rear leather gucho seats were button controlled ~
>>
>> ~ Joe ~
>> --
>> /_][__][] [__|] - 1978 GMC 403 ""
>> O----------OO-* Eleganza II ""
>> " Joe & Lavelle " ""
>> 'sweet home alebamy'
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Fremont,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Wheat GMC concept revisited [message #132021 is a reply to message #131996] |
Sat, 25 June 2011 21:11 |
JimGunther
Messages: 228
Registered: March 2007
Location: West Haven, CT
Karma: 0
|
Senior Member |
|
|
Here's a link to an article (PDF) on my website about the Resurrections that were done by Explorer.
http://riskmanagementsearch.com/adgmc/ResArt96.pdf
As Jim K speculated (above), the engines were NOT new. Though the article states they were rebuilt, frankly, I have reason to believe the motor in my coach was never rebuilt.
I loved my Explorer II but, as the company probably lost money on every GMC they resurrected, they may have cut some corners as time went by.
Jim Gunther
www.LotusV6.com
now former owner - ;(
73 GMC-II 2600
by Explorer
|
|
|
|
| Re: [GMCnet] Wheat GMC concept revisited [message #132029 is a reply to message #132021] |
Sat, 25 June 2011 21:50 |
|
|
That was an interesting read. Thanks for sharing. It appears there was much
work done for what must have been very little ROI. Unless some really bad
coaches were bought for a really low price making a profit must have been
hard.
--
Byron Songer
1978 GMC Royale
Louisville, KY
http://www.gmceast.com
http://web.me.com/bnsonger
Jim Gunther wrote:
>
>
> Here's a link to an article (PDF) on my website about the Resurrections that
> were done by Explorer.
>
> http://riskmanagementsearch.com/adgmc/ResArt96.pdf
>
> As Jim K speculated (above), the engines were NOT new. Though the article
> states they were rebuilt, frankly, I have reason to believe the motor in my
> coach was never rebuilt.
>
> I loved my Explorer II but, as the company probably lost money on every GMC
> they resurrected, they may have cut some corners as time went by.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
Byron Songer
Full-timing to enjoy the USA
Former owner but still an admirer
GMC paint schemes at -
http://www.songerconsulting.net
|
|
|
|
| Re: [GMCnet] Wheat GMC concept revisited [message #132031 is a reply to message #131981] |
Sat, 25 June 2011 22:06 |
|
|
A technical correction about the Monaco Vesta (and the Holiday Rambler Trip,
the twin sister). These are the first units designed and built under the
Navistar umbrella. That would mean it has an International MaxxForce diesel
on a Workhorse chassis with body and interior by Monaco/Holiday Ramble. Yes,
you are looking at $200K and a front end only a mother could love. Of
course, that price includes a slide-out and it still rides high.
Other than the Winnebago Spectrum, the only other thing that came close to
replacing the GMC (for concept, etc) was the Newmar NewAire. One is listed
on the web for $30K - cheapest I've seen by about $30K.
--
Byron Songer
1978 GMC Royale
Louisville, KY
http://www.gmceast.com
http://web.me.com/bnsonger
Chris Choffat wrote:
>
>
> The workhorse FWD chassis would be a good candidate, that is what Jim B has
> used, but at like $60K a copy, by the time you get the coach built, you are
> looking at $200K. At that point, we have the new Monaco Vesta, which is built
> wholly by Monaco (except the engine and tranny) like the GMC was sorta built
> wholly by GM. It is all metal and FRP (or SMC) and all the systems are
> engineered by the same folks to work together. Sorta like a Mac vs a PC, it
> should just work better.
>
> I think that is the direction these things are going, and with that out there,
> other than the current funky styling, why would I want a New GMC that doesn't
> have much room. The Vesta is a RWD Diesel Puller if I recall, and the article
> in FMC stated it was pretty quiet and had no heat from the engine room.
>
> I love my GMC, but We will outgrow the thing when we start spending part of
> the year in her. That's a long way off, and then maybe a nice gently used
> Vesta would fit nicely next to my GMC.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
Byron Songer
Full-timing to enjoy the USA
Former owner but still an admirer
GMC paint schemes at -
http://www.songerconsulting.net
|
|
|
|
|
|
| Re: [GMCnet] Wheat GMC concept revisited [message #132045 is a reply to message #132039] |
Sat, 25 June 2011 23:41 |
|
jaholland
Messages: 565
Registered: June 2010
Location: Sweet Home Alebamy
Karma: 0
|
Senior Member |
|
|
The GMC Explorer II Motorhome Project was The Love Of the Father of Steve Kesler {Bob Kesler} ~
Bob Kesler told me that they tryed the GM 6.2 Diesel, the 454 but found the 455 best suited ~
Later, when his son {Steve}took control of the company, the GMC Motorhome assembly was dropped ~
It was real neat seeing just how the power dining seats and the rear facing seats
would automatically fold out to make into a bed ~ I was impressed by the interior quality ~
I would still like to acquire one of their Power Tri-Fold Front Passenger Seats ~
I almost bought a gutted '74 26 footer & was quoted by Bob $40 K for the upgrade on it ~
{but that was in the early 90's}
~ Joe ~
/_]*[__][] *[__|] ~ * '73 TZE063V101887 "
"
O----------OO--]* ~ '78 TZE168V100234 "
"
" Joe & Lavelle " "
"
'sweet home alebamy'
[Updated on: Sun, 26 June 2011 22:30] Report message to a moderator |
|
|
|
Goto Forum:
Current Time: Tue Oct 15 15:32:00 CDT 2024
Total time taken to generate the page: 0.02399 seconds
|
GMCforum
Search
Help
Register
Login
Home
