GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Installing an EFI
Installing an EFI [message #131139] Mon, 20 June 2011 18:59 Go to next message
Larry is currently offline  Larry   United States
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma: 10
Senior Member
Those of you that have installed the EBL Flash with 7730 or 7747 computer...or any computer for that matter, where did you put the computer and where did you drill holes for the wiring and why?

Thanks

Larry Smile
78 Royale w/500 Caddy
Menomonie, WI.

Report message to a moderator

Re: [GMCnet] Installing an EFI [message #131143 is a reply to message #131139] Mon, 20 June 2011 19:23 Go to previous messageGo to next message
Mr ERFisher is currently offline  Mr ERFisher   United States
Messages: 7117
Registered: August 2005
Karma: 2
Senior Member
my 2 are stock, and I put them here

http://gmcmotorhome.info/howell.html

gene


On Mon, Jun 20, 2011 at 4:59 PM, Larry <weidnerl@wwt.net> wrote:

>
>
> Those of you that have installed the EBL Flash with 7730 or 7747
> computer...or any computer for that matter, where did you put the computer
> and where did you drill holes for the wiring and why?
>
> Thanks
> --
> Larry :)
> 78 Royale w/500 Caddy
> Menomonie, WI.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: Installing an EFI [message #131181 is a reply to message #131139] Mon, 20 June 2011 22:15 Go to previous messageGo to next message
Surbo is currently offline  Surbo   United States
Messages: 213
Registered: February 2004
Karma: 0
Senior Member
Larry wrote on Mon, 20 June 2011 18:59

Those of you that have installed the EBL Flash with 7730 or 7747 computer...or any computer for that matter, where did you put the computer and where did you drill holes for the wiring and why?

Thanks


Larry;

Here is where I installed mine, but you need a custom dash to do it probably. It's easy to get at and has ample air circulation.


http://www.gmcmhphotos.com/photos/showphoto.php?photo=19696&cat=4680

Bob Drewes in SESD w/455, w/TBI, w/EBL

Report message to a moderator

Re: Installing an EFI [message #131228 is a reply to message #131181] Tue, 21 June 2011 08:32 Go to previous message
Larry is currently offline  Larry   United States
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma: 10
Senior Member
Huh.....sound reduction foam hey...didn't know that the computer made that much noise.

Surbo wrote on Mon, 20 June 2011 22:15

Larry wrote on Mon, 20 June 2011 18:59

Those of you that have installed the EBL Flash with 7730 or 7747 computer...or any computer for that matter, where did you put the computer and where did you drill holes for the wiring and why?

Thanks


Larry;

Here is where I installed mine, but you need a custom dash to do it probably. It's easy to get at and has ample air circulation.


http://www.gmcmhphotos.com/photos/showphoto.php?photo=19696&cat=4680

Bob Drewes in SESD w/455, w/TBI, w/EBL

Larry Smile
78 Royale w/500 Caddy
Menomonie, WI.

Report message to a moderator

Previous Topic: [GMCnet] For John Shotwell - 2 Vin Numbers
Next Topic: Bad? "new" ball joint
Goto Forum:
  


Current Time: Wed Feb 12 14:54:21 CST 2025

Total time taken to generate the page: 0.05016 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software